upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52 lines
1.5 KiB
52 lines
1.5 KiB
7 years ago
|
Rockusb (Rockchip USB protocol)
|
||
|
=====================================================
|
||
|
|
||
|
Overview
|
||
|
--------
|
||
|
|
||
|
Rockusb protocol is widely used by Rockchip SoC based devices. It can
|
||
|
read/write info, image to/from devices. This document briefly describes how to
|
||
|
use Rockusb for upgrading firmware (e.g. kernel, u-boot, rootfs, etc.).
|
||
|
|
||
|
Tools
|
||
|
--------
|
||
|
There are many tools can support Rockusb protocol. rkdeveloptool
|
||
|
(https://github.com/rockchip-linux/rkdeveloptool) is open source,
|
||
|
It is maintained by Rockchip. People don't want to build from source
|
||
|
can download from here
|
||
|
(https://github.com/rockchip-linux/rkbin/blob/master/tools/rkdeveloptool)
|
||
|
|
||
|
Usage
|
||
|
--------
|
||
|
The Usage of Rockusb command is:
|
||
|
|
||
|
rockusb <USB_controller> <devtype> <dev[:part]>
|
||
|
|
||
|
e.g. rockusb 0 mmc 0
|
||
|
|
||
|
On your U-Boot console, type this command to enter rockusb mode.
|
||
|
On your host PC. use lsusb command. you should see a usb device
|
||
|
using 0x2207 as its USB verdor id.
|
||
|
|
||
|
for more detail about the rkdeveloptool. please read the usage.
|
||
|
|
||
|
rkdeveloptool -h
|
||
|
|
||
|
use rkdeveloptool wl command to write lba. BeginSec is the lba on device
|
||
|
you want to write.
|
||
|
|
||
|
sudo rkdeveloptool wl <BeginSec> <File>
|
||
|
|
||
|
to flash U-Boot image use below command. U-Boot binary is made by mkimage.
|
||
|
see doc/README.rockchip for more detail about how to get U-Boot binary.
|
||
|
|
||
|
sudo rkdeveloptool wl 64 <U-Boot binary>
|
||
|
|
||
|
There are plenty of Rockusb command. but wl(write lba) and
|
||
|
rd(reboot) command. These two command can let people flash
|
||
|
image to device.
|
||
|
|
||
|
To do
|
||
|
-----
|
||
|
* Fully support Rockusb protocol
|