upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/drivers/usb/host/r8a66597-hcd.c

861 lines
21 KiB

// SPDX-License-Identifier: GPL-2.0
/*
* R8A66597 HCD (Host Controller Driver) for u-boot
*
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*/
#include <common.h>
#include <console.h>
#include <usb.h>
#include <asm/io.h>
#include <linux/iopoll.h>
#include "r8a66597.h"
#ifdef R8A66597_DEBUG
#define R8A66597_DPRINT printf
#else
#define R8A66597_DPRINT(...)
#endif
static struct r8a66597 gr8a66597;
static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport)
{
int i;
*hub_devnum = 0;
*hubport = 0;
/* check a device connected to root_hub */
if ((dev->parent && dev->parent->devnum == 1) ||
(dev->devnum == 1))
return;
for (i = 0; i < USB_MAXCHILDREN; i++) {
if (dev->parent->children[i] == dev) {
*hub_devnum = (u8)dev->parent->devnum;
*hubport = i;
return;
}
}
printf("get_hub_data error.\n");
}
static void set_devadd(struct r8a66597 *r8a66597, u8 r8a66597_address,
struct usb_device *dev, int port)
{
u16 val, usbspd, upphub, hubport;
unsigned long devadd_reg = get_devadd_addr(r8a66597_address);
get_hub_data(dev, &upphub, &hubport);
usbspd = r8a66597->speed;
val = (upphub << 11) | (hubport << 8) | (usbspd << 6) | (port & 0x0001);
r8a66597_write(r8a66597, val, devadd_reg);
}
static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
{
u16 tmp;
int i = 0;
#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
do {
r8a66597_write(r8a66597, SCKE, SYSCFG0);
tmp = r8a66597_read(r8a66597, SYSCFG0);
if (i++ > 1000) {
printf("register access fail.\n");
return -1;
}
} while ((tmp & SCKE) != SCKE);
r8a66597_write(r8a66597, 0x04, 0x02);
#else
do {
r8a66597_write(r8a66597, USBE, SYSCFG0);
tmp = r8a66597_read(r8a66597, SYSCFG0);
if (i++ > 1000) {
printf("register access fail.\n");
return -1;
}
} while ((tmp & USBE) != USBE);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
#if !defined(CONFIG_RZA_USB)
r8a66597_mdfy(r8a66597, CONFIG_R8A66597_XTAL, XTAL, SYSCFG0);
i = 0;
r8a66597_bset(r8a66597, XCKE, SYSCFG0);
do {
udelay(1000);
tmp = r8a66597_read(r8a66597, SYSCFG0);
if (i++ > 500) {
printf("register access fail.\n");
return -1;
}
} while ((tmp & SCKE) != SCKE);
#else
/*
* RZ/A Only:
* Bits XTAL(UCKSEL) and UPLLE in SYSCFG0 for USB0 controls both USB0
* and USB1, so we must always set the USB0 register
*/
#if (CONFIG_R8A66597_XTAL == 1)
setbits(le16, R8A66597_BASE0, XTAL);
#endif
mdelay(1);
setbits(le16, R8A66597_BASE0, UPLLE);
mdelay(1);
r8a66597_bset(r8a66597, SUSPM, SUSPMODE0);
#endif /* CONFIG_RZA_USB */
#endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
return 0;
}
static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
{
#if !defined(CONFIG_RZA_USB)
r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
udelay(1);
#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
#endif
#else
r8a66597_bclr(r8a66597, SUSPM, SUSPMODE0);
clrbits(le16, R8A66597_BASE0, UPLLE);
mdelay(1);
r8a66597_bclr(r8a66597, USBE, SYSCFG0);
mdelay(1);
#endif
}
static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
{
u16 val;
val = port ? DRPD : DCFM | DRPD;
r8a66597_bset(r8a66597, val, get_syscfg_reg(port));
r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
#if !defined(CONFIG_RZA_USB)
r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port));
#endif
}
static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
{
u16 val, tmp;
r8a66597_write(r8a66597, 0, get_intenb_reg(port));
r8a66597_write(r8a66597, 0, get_intsts_reg(port));
r8a66597_port_power(r8a66597, port, 0);
do {
tmp = r8a66597_read(r8a66597, SOFCFG) & EDGESTS;
udelay(640);
} while (tmp == EDGESTS);
val = port ? DRPD : DCFM | DRPD;
r8a66597_bclr(r8a66597, val, get_syscfg_reg(port));
r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
}
static int enable_controller(struct r8a66597 *r8a66597)
{
int ret, port;
ret = r8a66597_clock_enable(r8a66597);
if (ret < 0)
return ret;
#if !defined(CONFIG_RZA_USB)
r8a66597_bset(r8a66597, CONFIG_R8A66597_LDRV & LDRV, PINCFG);
#endif
r8a66597_bset(r8a66597, USBE, SYSCFG0);
r8a66597_bset(r8a66597, INTL, SOFCFG);
r8a66597_write(r8a66597, 0, INTENB0);
for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
r8a66597_write(r8a66597, 0, get_intenb_reg(port));
r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, CFIFOSEL);
r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, D0FIFOSEL);
r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, D1FIFOSEL);
r8a66597_bset(r8a66597, TRNENSEL, SOFCFG);
for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
r8a66597_enable_port(r8a66597, port);
return 0;
}
static void disable_controller(struct r8a66597 *r8a66597)
{
int i;
if (!(r8a66597_read(r8a66597, SYSCFG0) & USBE))
return;
r8a66597_write(r8a66597, 0, INTENB0);
r8a66597_write(r8a66597, 0, INTSTS0);
r8a66597_write(r8a66597, 0, D0FIFOSEL);
r8a66597_write(r8a66597, 0, D1FIFOSEL);
r8a66597_write(r8a66597, 0, DCPCFG);
r8a66597_write(r8a66597, 0x40, DCPMAXP);
r8a66597_write(r8a66597, 0, DCPCTR);
for (i = 0; i <= 10; i++)
r8a66597_write(r8a66597, 0, get_devadd_addr(i));
for (i = 1; i <= 5; i++) {
r8a66597_write(r8a66597, 0, get_pipetre_addr(i));
r8a66597_write(r8a66597, 0, get_pipetrn_addr(i));
}
for (i = 1; i < R8A66597_MAX_NUM_PIPE; i++) {
r8a66597_write(r8a66597, 0, get_pipectr_addr(i));
r8a66597_write(r8a66597, i, PIPESEL);
r8a66597_write(r8a66597, 0, PIPECFG);
r8a66597_write(r8a66597, 0, PIPEBUF);
r8a66597_write(r8a66597, 0, PIPEMAXP);
r8a66597_write(r8a66597, 0, PIPEPERI);
}
for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++)
r8a66597_disable_port(r8a66597, i);
r8a66597_clock_disable(r8a66597);
}
static void r8a66597_reg_wait(struct r8a66597 *r8a66597, unsigned long reg,
u16 mask, u16 loop)
{
u16 tmp;
int i = 0;
do {
tmp = r8a66597_read(r8a66597, reg);
if (i++ > 1000000) {
printf("register%lx, loop %x is timeout\n", reg, loop);
break;
}
} while ((tmp & mask) != loop);
}
static void pipe_buffer_setting(struct r8a66597 *r8a66597,
struct usb_device *dev, unsigned long pipe)
{
u16 val = 0;
u16 pipenum, bufnum, maxpacket;
if (usb_pipein(pipe)) {
pipenum = BULK_IN_PIPENUM;
bufnum = BULK_IN_BUFNUM;
maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
} else {
pipenum = BULK_OUT_PIPENUM;
bufnum = BULK_OUT_BUFNUM;
maxpacket = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
}
if (r8a66597->pipe_config & (1 << pipenum))
return;
r8a66597->pipe_config |= (1 << pipenum);
r8a66597_bset(r8a66597, ACLRM, get_pipectr_addr(pipenum));
r8a66597_bclr(r8a66597, ACLRM, get_pipectr_addr(pipenum));
r8a66597_write(r8a66597, pipenum, PIPESEL);
/* FIXME: This driver support bulk transfer only. */
if (!usb_pipein(pipe))
val |= R8A66597_DIR;
else
val |= R8A66597_SHTNAK;
val |= R8A66597_BULK | R8A66597_DBLB | usb_pipeendpoint(pipe);
r8a66597_write(r8a66597, val, PIPECFG);
r8a66597_write(r8a66597, (8 << 10) | bufnum, PIPEBUF);
r8a66597_write(r8a66597, make_devsel(usb_pipedevice(pipe)) |
maxpacket, PIPEMAXP);
r8a66597_write(r8a66597, 0, PIPEPERI);
r8a66597_write(r8a66597, SQCLR, get_pipectr_addr(pipenum));
}
static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
struct devrequest *setup)
{
int i;
unsigned short *p = (unsigned short *)setup;
unsigned long setup_addr = USBREQ;
u16 intsts1;
int timeout = 3000;
#if defined(CONFIG_RZA_USB)
u16 dcpctr;
#endif
u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum;
r8a66597_write(r8a66597, make_devsel(devsel) |
(8 << dev->maxpacketsize), DCPMAXP);
r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
#if defined(CONFIG_RZA_USB)
dcpctr = r8a66597_read(r8a66597, DCPCTR);
if ((dcpctr & PID) == PID_BUF) {
if (readw_poll_timeout(r8a66597->reg + DCPCTR, dcpctr,
dcpctr & BSTS, 1000) < 0) {
printf("DCPCTR BSTS timeout!\n");
return -ETIMEDOUT;
}
}
#endif
for (i = 0; i < 4; i++) {
r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr);
setup_addr += 2;
}
r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
r8a66597_write(r8a66597, SUREQ, DCPCTR);
while (1) {
intsts1 = r8a66597_read(r8a66597, INTSTS1);
if (intsts1 & SACK)
break;
if (intsts1 & SIGN) {
printf("setup packet send error\n");
return -1;
}
if (timeout-- < 0) {
printf("setup packet timeout\n");
return -1;
}
udelay(500);
}
return 0;
}
static int send_bulk_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
unsigned long pipe, void *buffer, int transfer_len)
{
u16 tmp, bufsize;
u16 *buf;
size_t size;
R8A66597_DPRINT("%s\n", __func__);
r8a66597_mdfy(r8a66597, MBW | BULK_OUT_PIPENUM,
MBW | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, BULK_OUT_PIPENUM);
tmp = r8a66597_read(r8a66597, CFIFOCTR);
if ((tmp & FRDY) == 0) {
printf("%s FRDY is not set (%x)\n", __func__, tmp);
return -1;
}
/* prepare parameters */
bufsize = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
buf = (u16 *)(buffer + dev->act_len);
size = min((int)bufsize, transfer_len - dev->act_len);
/* write fifo */
r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
if (buffer) {
r8a66597_write_fifo(r8a66597, CFIFO, buf, size);
r8a66597_write(r8a66597, BVAL, CFIFOCTR);
}
/* update parameters */
dev->act_len += size;
r8a66597_mdfy(r8a66597, PID_BUF, PID,
get_pipectr_addr(BULK_OUT_PIPENUM));
while (!(r8a66597_read(r8a66597, BEMPSTS) & (1 << BULK_OUT_PIPENUM)))
if (ctrlc())
return -1;
r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
if (dev->act_len >= transfer_len)
r8a66597_mdfy(r8a66597, PID_NAK, PID,
get_pipectr_addr(BULK_OUT_PIPENUM));
return 0;
}
static int receive_bulk_packet(struct r8a66597 *r8a66597,
struct usb_device *dev,
unsigned long pipe,
void *buffer, int transfer_len)
{
u16 tmp;
u16 *buf;
const u16 pipenum = BULK_IN_PIPENUM;
int rcv_len;
int maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
R8A66597_DPRINT("%s\n", __func__);
/* prepare */
if (dev->act_len == 0) {
r8a66597_mdfy(r8a66597, PID_NAK, PID,
get_pipectr_addr(pipenum));
r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
r8a66597_write(r8a66597, TRCLR, get_pipetre_addr(pipenum));
r8a66597_write(r8a66597,
(transfer_len + maxpacket - 1) / maxpacket,
get_pipetrn_addr(pipenum));
r8a66597_bset(r8a66597, TRENB, get_pipetre_addr(pipenum));
r8a66597_mdfy(r8a66597, PID_BUF, PID,
get_pipectr_addr(pipenum));
}
r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
while (!(r8a66597_read(r8a66597, BRDYSTS) & (1 << pipenum)))
if (ctrlc())
return -1;
r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
tmp = r8a66597_read(r8a66597, CFIFOCTR);
if ((tmp & FRDY) == 0) {
printf("%s FRDY is not set. (%x)\n", __func__, tmp);
return -1;
}
buf = (u16 *)(buffer + dev->act_len);
rcv_len = tmp & DTLN;
dev->act_len += rcv_len;
if (buffer) {
if (rcv_len == 0)
r8a66597_write(r8a66597, BCLR, CFIFOCTR);
else
r8a66597_read_fifo(r8a66597, CFIFO, buf, rcv_len);
}
return 0;
}
static int receive_control_packet(struct r8a66597 *r8a66597,
struct usb_device *dev,
void *buffer, int transfer_len)
{
u16 tmp;
int rcv_len;
/* FIXME: limit transfer size : 64byte or less */
r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
r8a66597_bset(r8a66597, SQSET, DCPCTR);
r8a66597_write(r8a66597, BCLR, CFIFOCTR);
r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
while (!(r8a66597_read(r8a66597, BRDYSTS) & 0x0001))
if (ctrlc())
return -1;
r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
r8a66597_mdfy(r8a66597, MBW, MBW | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
tmp = r8a66597_read(r8a66597, CFIFOCTR);
if ((tmp & FRDY) == 0) {
printf("%s FRDY is not set. (%x)\n", __func__, tmp);
return -1;
}
rcv_len = tmp & DTLN;
dev->act_len += rcv_len;
r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
if (buffer) {
if (rcv_len == 0)
r8a66597_write(r8a66597, BCLR, DCPCTR);
else
r8a66597_read_fifo(r8a66597, CFIFO, buffer, rcv_len);
}
return 0;
}
static int send_status_packet(struct r8a66597 *r8a66597,
unsigned long pipe)
{
r8a66597_bset(r8a66597, SQSET, DCPCTR);
r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
if (usb_pipein(pipe)) {
r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
r8a66597_write(r8a66597, BCLR | BVAL, CFIFOCTR);
} else {
r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
r8a66597_write(r8a66597, BCLR, CFIFOCTR);
}
r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
while (!(r8a66597_read(r8a66597, BEMPSTS) & 0x0001))
if (ctrlc())
return -1;
return 0;
}
static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port)
{
int count = R8A66597_MAX_SAMPLING;
unsigned short syssts, old_syssts;
R8A66597_DPRINT("%s\n", __func__);
old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
while (count > 0) {
usb: replace wait_ms() with mdelay() Common code has a mdelay() func, so use that instead of the usb-specific wait_ms() func. This also fixes the build errors: ohci-hcd.c: In function 'submit_common_msg': /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1519:9: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1816:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1827:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1844:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1563:11: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1583:9: sorry, unimplemented: called from here make[1]: *** [ohci-hcd.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marek Vasut <marex@denx.de>
13 years ago
mdelay(R8A66597_RH_POLL_TIME);
syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
if (syssts == old_syssts) {
count--;
} else {
count = R8A66597_MAX_SAMPLING;
old_syssts = syssts;
}
}
}
static void r8a66597_bus_reset(struct r8a66597 *r8a66597, int port)
{
usb: replace wait_ms() with mdelay() Common code has a mdelay() func, so use that instead of the usb-specific wait_ms() func. This also fixes the build errors: ohci-hcd.c: In function 'submit_common_msg': /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1519:9: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1816:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1827:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1844:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1563:11: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1583:9: sorry, unimplemented: called from here make[1]: *** [ohci-hcd.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marek Vasut <marex@denx.de>
13 years ago
mdelay(10);
r8a66597_mdfy(r8a66597, USBRST, USBRST | UACT, get_dvstctr_reg(port));
usb: replace wait_ms() with mdelay() Common code has a mdelay() func, so use that instead of the usb-specific wait_ms() func. This also fixes the build errors: ohci-hcd.c: In function 'submit_common_msg': /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1519:9: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1816:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1827:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1844:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1563:11: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1583:9: sorry, unimplemented: called from here make[1]: *** [ohci-hcd.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marek Vasut <marex@denx.de>
13 years ago
mdelay(50);
r8a66597_mdfy(r8a66597, UACT, USBRST | UACT, get_dvstctr_reg(port));
usb: replace wait_ms() with mdelay() Common code has a mdelay() func, so use that instead of the usb-specific wait_ms() func. This also fixes the build errors: ohci-hcd.c: In function 'submit_common_msg': /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1519:9: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1816:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1827:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1844:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1563:11: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1583:9: sorry, unimplemented: called from here make[1]: *** [ohci-hcd.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marek Vasut <marex@denx.de>
13 years ago
mdelay(50);
}
static int check_usb_device_connecting(struct r8a66597 *r8a66597)
{
int timeout = 10000; /* 100usec * 10000 = 1sec */
int i;
for (i = 0; i < 5; i++) {
/* check a usb cable connect */
while (!(r8a66597_read(r8a66597, INTSTS1) & ATTCH)) {
if (timeout-- < 0) {
printf("%s timeout.\n", __func__);
return -1;
}
udelay(100);
}
/* check a data line */
r8a66597_check_syssts(r8a66597, 0);
r8a66597_bus_reset(r8a66597, 0);
r8a66597->speed = get_rh_usb_speed(r8a66597, 0);
if (!(r8a66597_read(r8a66597, INTSTS1) & DTCH)) {
r8a66597->port_change = USB_PORT_STAT_C_CONNECTION;
r8a66597->port_status = USB_PORT_STAT_CONNECTION |
USB_PORT_STAT_ENABLE;
return 0; /* success */
}
R8A66597_DPRINT("USB device has detached. retry = %d\n", i);
r8a66597_write(r8a66597, ~DTCH, INTSTS1);
}
return -1; /* fail */
}
/*-------------------------------------------------------------------------*
* Virtual Root Hub
*-------------------------------------------------------------------------*/
usb: create common header virtual root hub descriptors Many USB host controller drivers contain almost identical copies of the same virtual root hub descriptors. Put these into a common file to avoid duplication. Note that there were some very minor differences between the descriptors in the various files, such as: - USB 1.0 vs. USB 1.1 - Manufacturer/Device ID - Max packet size - String content I assume these aren't relevant. Cc: Thomas Lange <thomas@corelatus.se> Cc: Shinya Kuribayashi <skuribay@pobox.com> Cc: Gary Jennejohn <garyj@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Eric Millbrandt <emillbrandt@coldhaus.com> Cc: Pierre Aubert <p.aubert@staubli.com> Cc: Stefan Roese <sr@denx.de> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Denis Peter <d.peter@mpl.ch> Cc: Rodolfo Giometti <giometti@linux.it> Cc: Zhang Wei <wei.zhang@freescale.com> Cc: Mateusz Zalega <m.zalega@samsung.com> Cc: Remy Bohmer <linux@bohmer.net> Cc: Markus Klotzbuecher <mk@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Gary Jennejohn <garyj@denx.de> Cc: C Nauman <cnauman@diagraph.com> Cc: David Müller <d.mueller@elsoft.ch> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Thomas Abraham <t-abraham@ti.com> Cc: Tom Rini <trini@ti.com> Cc: Andrew Murray <amurray@embedded-bits.co.uk> Cc: Matej Frančeškin <matej.franceskin@comtrade.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Bryan Wu <cooloney@gmail.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
11 years ago
#include <usbroothubdes.h>
static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len, struct devrequest *cmd)
{
struct r8a66597 *r8a66597 = &gr8a66597;
int leni = transfer_len;
int len = 0;
int stat = 0;
__u16 bmRType_bReq;
__u16 wValue;
__u16 wLength;
unsigned char data[32];
R8A66597_DPRINT("%s\n", __func__);
if (usb_pipeint(pipe)) {
printf("Root-Hub submit IRQ: NOT implemented");
return 0;
}
bmRType_bReq = cmd->requesttype | (cmd->request << 8);
wValue = cpu_to_le16 (cmd->value);
wLength = cpu_to_le16 (cmd->length);
switch (bmRType_bReq) {
case RH_GET_STATUS:
*(__u16 *)buffer = cpu_to_le16(1);
len = 2;
break;
case RH_GET_STATUS | RH_INTERFACE:
*(__u16 *)buffer = cpu_to_le16(0);
len = 2;
break;
case RH_GET_STATUS | RH_ENDPOINT:
*(__u16 *)buffer = cpu_to_le16(0);
len = 2;
break;
case RH_GET_STATUS | RH_CLASS:
*(__u32 *)buffer = cpu_to_le32(0);
len = 4;
break;
case RH_GET_STATUS | RH_OTHER | RH_CLASS:
*(__u32 *)buffer = cpu_to_le32(r8a66597->port_status |
(r8a66597->port_change << 16));
len = 4;
break;
case RH_CLEAR_FEATURE | RH_ENDPOINT:
case RH_CLEAR_FEATURE | RH_CLASS:
break;
case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
switch (wValue) {
case RH_C_PORT_CONNECTION:
r8a66597->port_change &= ~USB_PORT_STAT_C_CONNECTION;
break;
}
break;
case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
switch (wValue) {
case (RH_PORT_SUSPEND):
break;
case (RH_PORT_RESET):
r8a66597_bus_reset(r8a66597, 0);
break;
case (RH_PORT_POWER):
break;
case (RH_PORT_ENABLE):
break;
}
break;
case RH_SET_ADDRESS:
gr8a66597.rh_devnum = wValue;
break;
case RH_GET_DESCRIPTOR:
switch ((wValue & 0xff00) >> 8) {
case (0x01): /* device descriptor */
len = min_t(unsigned int,
leni,
min_t(unsigned int,
sizeof(root_hub_dev_des),
wLength));
memcpy(buffer, root_hub_dev_des, len);
break;
case (0x02): /* configuration descriptor */
len = min_t(unsigned int,
leni,
min_t(unsigned int,
sizeof(root_hub_config_des),
wLength));
memcpy(buffer, root_hub_config_des, len);
break;
case (0x03): /* string descriptors */
if (wValue == 0x0300) {
len = min_t(unsigned int,
leni,
min_t(unsigned int,
sizeof(root_hub_str_index0),
wLength));
memcpy(buffer, root_hub_str_index0, len);
}
if (wValue == 0x0301) {
len = min_t(unsigned int,
leni,
min_t(unsigned int,
sizeof(root_hub_str_index1),
wLength));
memcpy(buffer, root_hub_str_index1, len);
}
break;
default:
stat = USB_ST_STALLED;
}
break;
case RH_GET_DESCRIPTOR | RH_CLASS:
{
__u32 temp = 0x00000001;
data[0] = 9; /* min length; */
data[1] = 0x29;
data[2] = temp & RH_A_NDP;
data[3] = 0;
if (temp & RH_A_PSM)
data[3] |= 0x1;
if (temp & RH_A_NOCP)
data[3] |= 0x10;
else if (temp & RH_A_OCPM)
data[3] |= 0x8;
/* corresponds to data[4-7] */
data[5] = (temp & RH_A_POTPGT) >> 24;
data[7] = temp & RH_B_DR;
if (data[2] < 7) {
data[8] = 0xff;
} else {
data[0] += 2;
data[8] = (temp & RH_B_DR) >> 8;
data[10] = data[9] = 0xff;
}
len = min_t(unsigned int, leni,
min_t(unsigned int, data[0], wLength));
memcpy(buffer, data, len);
break;
}
case RH_GET_CONFIGURATION:
*(__u8 *) buffer = 0x01;
len = 1;
break;
case RH_SET_CONFIGURATION:
break;
default:
R8A66597_DPRINT("unsupported root hub command");
stat = USB_ST_STALLED;
}
usb: replace wait_ms() with mdelay() Common code has a mdelay() func, so use that instead of the usb-specific wait_ms() func. This also fixes the build errors: ohci-hcd.c: In function 'submit_common_msg': /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1519:9: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1816:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1827:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1844:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1563:11: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1583:9: sorry, unimplemented: called from here make[1]: *** [ohci-hcd.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marek Vasut <marex@denx.de>
13 years ago
mdelay(1);
len = min_t(int, len, leni);
dev->act_len = len;
dev->status = stat;
return stat;
}
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len)
{
struct r8a66597 *r8a66597 = &gr8a66597;
int ret = 0;
R8A66597_DPRINT("%s\n", __func__);
R8A66597_DPRINT("pipe = %08x, buffer = %p, len = %d, devnum = %d\n",
pipe, buffer, transfer_len, dev->devnum);
set_devadd(r8a66597, dev->devnum, dev, 0);
pipe_buffer_setting(r8a66597, dev, pipe);
dev->act_len = 0;
while (dev->act_len < transfer_len && ret == 0) {
if (ctrlc())
return -1;
if (usb_pipein(pipe))
ret = receive_bulk_packet(r8a66597, dev, pipe, buffer,
transfer_len);
else
ret = send_bulk_packet(r8a66597, dev, pipe, buffer,
transfer_len);
}
if (ret == 0)
dev->status = 0;
return ret;
}
int submit_control_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len, struct devrequest *setup)
{
struct r8a66597 *r8a66597 = &gr8a66597;
u16 r8a66597_address = setup->request == USB_REQ_SET_ADDRESS ?
0 : dev->devnum;
R8A66597_DPRINT("%s\n", __func__);
if (usb_pipedevice(pipe) == r8a66597->rh_devnum)
return r8a66597_submit_rh_msg(dev, pipe, buffer, transfer_len,
setup);
R8A66597_DPRINT("%s: setup\n", __func__);
set_devadd(r8a66597, r8a66597_address, dev, 0);
if (send_setup_packet(r8a66597, dev, setup) < 0) {
printf("setup packet send error\n");
return -1;
}
dev->act_len = 0;
if (usb_pipein(pipe))
if (receive_control_packet(r8a66597, dev, buffer,
transfer_len) < 0)
return -1;
if (send_status_packet(r8a66597, pipe) < 0)
return -1;
dev->status = 0;
return 0;
}
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval)
{
/* no implement */
R8A66597_DPRINT("%s\n", __func__);
return 0;
}
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
struct r8a66597 *r8a66597 = &gr8a66597;
R8A66597_DPRINT("%s\n", __func__);
memset(r8a66597, 0, sizeof(*r8a66597));
r8a66597->reg = CONFIG_R8A66597_BASE_ADDR;
disable_controller(r8a66597);
usb: replace wait_ms() with mdelay() Common code has a mdelay() func, so use that instead of the usb-specific wait_ms() func. This also fixes the build errors: ohci-hcd.c: In function 'submit_common_msg': /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1519:9: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1816:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1827:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1844:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1563:11: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1583:9: sorry, unimplemented: called from here make[1]: *** [ohci-hcd.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marek Vasut <marex@denx.de>
13 years ago
mdelay(100);
enable_controller(r8a66597);
r8a66597_port_power(r8a66597, 0 , 1);
/* check usb device */
check_usb_device_connecting(r8a66597);
usb: replace wait_ms() with mdelay() Common code has a mdelay() func, so use that instead of the usb-specific wait_ms() func. This also fixes the build errors: ohci-hcd.c: In function 'submit_common_msg': /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1519:9: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1816:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1827:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1844:10: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1563:11: sorry, unimplemented: called from here /usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available ohci-hcd.c:1583:9: sorry, unimplemented: called from here make[1]: *** [ohci-hcd.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marek Vasut <marex@denx.de>
13 years ago
mdelay(50);
return 0;
}
int usb_lowlevel_stop(int index)
{
disable_controller(&gr8a66597);
return 0;
}