Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
25684 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: 5dff844d7f
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '5dff844d7f'
${ noResults }
u-boot/arch/arm/dts/tegra114.dtsi

303 lines
7.2 KiB
Raw Normal View History Unescape

tegra: dts: Add serial port details Some Tegra device tree files do not include information about the serial ports. Add this and also add information about the input clock speed. The console alias needs to be set up to indicate which port is used for the console. Also add a binding file since this is missing. Series-changes; 5 - Add full serial port nodes from Linux tree (commit fc9d4dbe) - Use /chosen/stdout-path instead of /aliases/console to specify the console Signed-off-by: Simon Glass <sjg@chromium.org>
10 years ago
#include <dt-bindings/clock/tegra114-car.h>
tegra: dts: Bring in GPIO bindings from linux These files are taken from Linux 3.14. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
11 years ago
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
Tegra: fdt: Change /include/ to #include for C preprocessor dts Makefile has the arch & board include paths added to DTS_CPPFLAGS. This allows the use of '#include "xyz"' in the dts/dtsi file which helps the C preprocessor find common dtsi include files. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
#include "skeleton.dtsi"
Tegra114: Dalmore: Add DT files These are stripped down for bringup, They'll be filled out later to match-up with the kernel DT contents, and/or as devices are brought up (mmc, usb, spi, etc.). Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years ago
/ {
compatible = "nvidia,tegra114";
Tegra114: fdt: Update DT files with I2C info for T114/Dalmore T114, like T30, does not have a separate/different DVC (power I2C) controller like T20 - all 5 I2C controllers are identical, but I2C5 is used to designate the controller intended for power control (PWR_I2C in the schematics). PWR_I2C is set to 400KHz. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO, tegra_car) Minor edit to tegra_car node, add gpio node. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
tegra_car: clock {
Tegra114: fdt: Update DT files with I2C info for T114/Dalmore T114, like T30, does not have a separate/different DVC (power I2C) controller like T20 - all 5 I2C controllers are identical, but I2C5 is used to designate the controller intended for power control (PWR_I2C in the schematics). PWR_I2C is set to 400KHz. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
tegra114: fdt: add apbdma block Add node for apbdma controller hardware. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
apbdma: dma {
compatible = "nvidia,tegra114-apbdma", "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
interrupts = <0 104 0x04
0 105 0x04
0 106 0x04
0 107 0x04
0 108 0x04
0 109 0x04
0 110 0x04
0 111 0x04
0 112 0x04
0 113 0x04
0 114 0x04
0 115 0x04
0 116 0x04
0 117 0x04
0 118 0x04
0 119 0x04
0 128 0x04
0 129 0x04
0 130 0x04
0 131 0x04
0 132 0x04
0 133 0x04
0 134 0x04
0 135 0x04
0 136 0x04
0 137 0x04
0 138 0x04
0 139 0x04
0 140 0x04
0 141 0x04
0 142 0x04
0 143 0x04>;
};
tegra: dts: Bring in GPIO bindings from linux These files are taken from Linux 3.14. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
11 years ago
gpio: gpio@6000d000 {
Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO, tegra_car) Minor edit to tegra_car node, add gpio node. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
tegra: dts: Bring in GPIO bindings from linux These files are taken from Linux 3.14. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
11 years ago
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
Tegra114: fdt: Sync DT nodes with kernel DT files (GPIO, tegra_car) Minor edit to tegra_car node, add gpio node. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
Tegra114: fdt: Update DT files with I2C info for T114/Dalmore T114, like T30, does not have a separate/different DVC (power I2C) controller like T20 - all 5 I2C controllers are identical, but I2C5 is used to designate the controller intended for power control (PWR_I2C in the schematics). PWR_I2C is set to 400KHz. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
i2c@7000c000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c000 0x100>;
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 12>;
status = "disabled";
};
i2c@7000c400 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c400 0x100>;
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 54>;
status = "disabled";
};
i2c@7000c500 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 67>;
status = "disabled";
};
i2c@7000c700 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c700 0x100>;
interrupts = <0 120 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 103>;
status = "disabled";
};
i2c@7000d000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000d000 0x100>;
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 47>;
status = "disabled";
};
tegra114: fdt: add SPI blocks Add nodes for t114 SPI controller hardware Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
tegra: dts: Add serial port details Some Tegra device tree files do not include information about the serial ports. Add this and also add information about the input clock speed. The console alias needs to be set up to indicate which port is used for the console. Also add a binding file since this is missing. Series-changes; 5 - Add full serial port nodes from Linux tree (commit fc9d4dbe) - Use /chosen/stdout-path instead of /aliases/console to specify the console Signed-off-by: Simon Glass <sjg@chromium.org>
10 years ago
uarta: serial@70006000 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_UARTA>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
uartb: serial@70006040 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_UARTB>;
resets = <&tegra_car 7>;
reset-names = "serial";
dmas = <&apbdma 9>, <&apbdma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
uartc: serial@70006200 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_UARTC>;
resets = <&tegra_car 55>;
reset-names = "serial";
dmas = <&apbdma 10>, <&apbdma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
uartd: serial@70006300 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_UARTD>;
resets = <&tegra_car 65>;
reset-names = "serial";
dmas = <&apbdma 19>, <&apbdma 19>;
dma-names = "rx", "tx";
status = "disabled";
};
tegra114: fdt: add SPI blocks Add nodes for t114 SPI controller hardware Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
spi@7000d400 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
interrupts = <0 59 0x04>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC1, PLLP_OUT0 */
clocks = <&tegra_car 41>;
};
spi@7000d600 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC2, PLLP_OUT0 */
clocks = <&tegra_car 44>;
};
spi@7000d800 {
compatible = "nvidia,tegra114-spi";
ARM: tegra: fix a typo in the tegra114.dtsi The reg property for node spi@7000d800 was wrong. Fix it to match the HW. This change was verified against the Linux kernel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
11 years ago
reg = <0x7000d800 0x200>;
tegra114: fdt: add SPI blocks Add nodes for t114 SPI controller hardware Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC3, PLLP_OUT0 */
clocks = <&tegra_car 46>;
};
spi@7000da00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000da00 0x200>;
interrupts = <0 93 0x04>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC4, PLLP_OUT0 */
clocks = <&tegra_car 68>;
};
spi@7000dc00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000dc00 0x200>;
interrupts = <0 94 0x04>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC5, PLLP_OUT0 */
clocks = <&tegra_car 104>;
};
spi@7000de00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000de00 0x200>;
interrupts = <0 79 0x04>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* PERIPH_ID_SBC6, PLLP_OUT0 */
clocks = <&tegra_car 105>;
};
Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now) Took these values directly from the kernel dts files. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
12 years ago
sdhci@78000000 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000000 0x200>;
interrupts = <0 14 0x04>;
clocks = <&tegra_car 14>;
status = "disable";
};
sdhci@78000200 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000200 0x200>;
interrupts = <0 15 0x04>;
clocks = <&tegra_car 9>;
status = "disable";
};
sdhci@78000400 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000400 0x200>;
interrupts = <0 19 0x04>;
clocks = <&tegra_car 69>;
status = "disable";
};
sdhci@78000600 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000600 0x200>;
interrupts = <0 31 0x04>;
clocks = <&tegra_car 15>;
status = "disable";
};
ARM: Tegra: FDT: Add USB EHCI function for T30/T114 Add DT node for USB EHCI function. Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards. Signed-off-by: Jim Lin <jilin@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years ago
usb@7d000000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <52>;
phy_type = "utmi";
clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
status = "disabled";
};
usb@7d004000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <53>;
phy_type = "hsic";
clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
status = "disabled";
};
usb@7d008000 {
compatible = "nvidia,tegra114-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <129>;
phy_type = "utmi";
clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
status = "disabled";
};
Tegra114: Dalmore: Add DT files These are stripped down for bringup, They'll be filled out later to match-up with the kernel DT contents, and/or as devices are brought up (mmc, usb, spi, etc.). Signed-off-by: Tom Warren <twarren@nvidia.com>
12 years ago
};