upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/common/cmd_ext_common.c

198 lines
4.4 KiB

/*
* (C) Copyright 2011 - 2012 Samsung Electronics
* EXT2/4 filesystem implementation in Uboot by
* Uma Shankar <uma.shankar@samsung.com>
* Manjunatha C Achar <a.manjunatha@samsung.com>
*
* Ext4fs support
* made from existing cmd_ext2.c file of Uboot
*
* (C) Copyright 2004
* esd gmbh <www.esd-electronics.com>
* Reinhard Arlt <reinhard.arlt@esd-electronics.com>
*
* made from cmd_reiserfs by
*
* (C) Copyright 2003 - 2004
* Sysgo Real-Time Solutions, AG <www.elinos.com>
* Pavel Bartusek <pba@sysgo.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Changelog:
* 0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c
* file in uboot. Added ext4fs ls load and write support.
*/
#include <common.h>
#include <part.h>
#include <config.h>
#include <command.h>
#include <image.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <ext_common.h>
#include <ext4fs.h>
#include <linux/stat.h>
#include <malloc.h>
#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
#include <usb.h>
#endif
#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
#error DOS or EFI partition support must be selected
#endif
#define DOS_PART_MAGIC_OFFSET 0x1fe
#define DOS_FS_TYPE_OFFSET 0x36
#define DOS_FS32_TYPE_OFFSET 0x52
int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc,
char *const argv[])
{
char *filename = NULL;
int dev, part;
ulong addr = 0;
int filelen;
disk_partition_t info;
block_dev_desc_t *dev_desc;
char buf[12];
unsigned long count;
const char *addr_str;
count = 0;
addr = simple_strtoul(argv[3], NULL, 16);
filename = getenv("bootfile");
switch (argc) {
case 3:
addr_str = getenv("loadaddr");
if (addr_str != NULL)
addr = simple_strtoul(addr_str, NULL, 16);
else
addr = CONFIG_SYS_LOAD_ADDR;
break;
case 4:
break;
case 5:
filename = argv[4];
break;
case 6:
filename = argv[4];
count = simple_strtoul(argv[5], NULL, 16);
break;
default:
return cmd_usage(cmdtp);
}
if (!filename) {
puts("** No boot file defined **\n");
return 1;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years ago
part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
if (part < 0)
return 1;
dev = dev_desc->dev;
printf("Loading file \"%s\" from %s device %d%c%c\n",
filename, argv[1], dev,
part ? ':' : ' ', part ? part + '0' : ' ');
ext4fs_set_blk_dev(dev_desc, &info);
if (!ext4fs_mount(info.size)) {
printf("** Bad ext2 partition or disk - %s %d:%d **\n",
argv[1], dev, part);
ext4fs_close();
goto fail;
}
filelen = ext4fs_open(filename);
if (filelen < 0) {
printf("** File not found %s\n", filename);
ext4fs_close();
goto fail;
}
if ((count < filelen) && (count != 0))
filelen = count;
if (ext4fs_read((char *)addr, filelen) != filelen) {
printf("** Unable to read \"%s\" from %s %d:%d **\n",
filename, argv[1], dev, part);
ext4fs_close();
goto fail;
}
ext4fs_close();
/* Loading ok, update default load address */
load_addr = addr;
printf("%d bytes read\n", filelen);
sprintf(buf, "%X", filelen);
setenv("filesize", buf);
return 0;
fail:
return 1;
}
int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
const char *filename = "/";
int dev;
int part;
block_dev_desc_t *dev_desc;
disk_partition_t info;
if (argc < 2)
return cmd_usage(cmdtp);
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years ago
part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
if (part < 0)
return 1;
if (argc == 4)
filename = argv[3];
dev = dev_desc->dev;
ext4fs_set_blk_dev(dev_desc, &info);
if (!ext4fs_mount(info.size)) {
printf("** Bad ext2 partition or disk - %s %d:%d **\n",
argv[1], dev, part);
ext4fs_close();
goto fail;
}
if (ext4fs_ls(filename)) {
printf("** Error extfs_ls() **\n");
ext4fs_close();
goto fail;
};
ext4fs_close();
return 0;
fail:
return 1;
}