upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/post/lib_powerpc/load.c

256 lines
4.0 KiB

/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
/*
* CPU test
* Load instructions: lbz(x)(u), lhz(x)(u), lha(x)(u), lwz(x)(u)
*
* All operations are performed on a 16-byte array. The array
* is 4-byte aligned. The base register points to offset 8.
* The immediate offset (index register) ranges in [-8 ... +7].
* The test cases are composed so that they do not
* cause alignment exceptions.
* The test contains a pre-built table describing all test cases.
* The table entry contains:
* the instruction opcode, the array contents, the value of the index
* register and the expected value of the destination register.
* After executing the instruction, the test verifies the
* value of the destination register and the value of the base
* register (it must change for "load with update" instructions).
*/
#include <post.h>
#include "cpu_asm.h"
#if CONFIG_POST & CONFIG_SYS_POST_CPU
extern void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3);
extern void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2);
static struct cpu_post_load_s
{
ulong cmd;
uint width;
int update;
int index;
ulong offset;
} cpu_post_load_table[] =
{
{
OP_LWZ,
4,
0,
0,
4
},
{
OP_LHA,
3,
0,
0,
2
},
{
OP_LHZ,
2,
0,
0,
2
},
{
OP_LBZ,
1,
0,
0,
1
},
{
OP_LWZU,
4,
1,
0,
4
},
{
OP_LHAU,
3,
1,
0,
2
},
{
OP_LHZU,
2,
1,
0,
2
},
{
OP_LBZU,
1,
1,
0,
1
},
{
OP_LWZX,
4,
0,
1,
4
},
{
OP_LHAX,
3,
0,
1,
2
},
{
OP_LHZX,
2,
0,
1,
2
},
{
OP_LBZX,
1,
0,
1,
1
},
{
OP_LWZUX,
4,
1,
1,
4
},
{
OP_LHAUX,
3,
1,
1,
2
},
{
OP_LHZUX,
2,
1,
1,
2
},
{
OP_LBZUX,
1,
1,
1,
1
},
};
static unsigned int cpu_post_load_size = ARRAY_SIZE(cpu_post_load_table);
int cpu_post_test_load (void)
{
int ret = 0;
unsigned int i;
int flag = disable_interrupts();
for (i = 0; i < cpu_post_load_size && ret == 0; i++)
{
struct cpu_post_load_s *test = cpu_post_load_table + i;
uchar data[16] =
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
ulong base0 = (ulong) (data + 8);
ulong base = base0;
ulong value;
if (test->index)
{
ulong code[] =
{
ASM_12(test->cmd, 5, 3, 4),
ASM_BLR,
};
cpu_post_exec_22w (code, &base, test->offset, &value);
}
else
{
ulong code[] =
{
ASM_11I(test->cmd, 4, 3, test->offset),
ASM_BLR,
};
cpu_post_exec_21w (code, &base, &value);
}
if (ret == 0)
{
if (test->update)
ret = base == base0 + test->offset ? 0 : -1;
else
ret = base == base0 ? 0 : -1;
}
if (ret == 0)
{
switch (test->width)
{
case 1:
ret = *(uchar *)(base0 + test->offset) == value ?
0 : -1;
break;
case 2:
ret = *(ushort *)(base0 + test->offset) == value ?
0 : -1;
break;
case 3:
ret = *(short *)(base0 + test->offset) == value ?
0 : -1;
break;
case 4:
ret = *(ulong *)(base0 + test->offset) == value ?
0 : -1;
break;
}
}
if (ret != 0)
{
post_log ("Error at load test %d !\n", i);
}
}
if (flag)
enable_interrupts();
return ret;
}
#endif