upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/cpu/nios/asmi.c

696 lines
15 KiB

/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if defined(CONFIG_NIOS_ASMI)
#include <command.h>
#include <nios-io.h>
#if !defined(CONFIG_SYS_NIOS_ASMIBASE)
#error "*** CONFIG_SYS_NIOS_ASMIBASE not defined ***"
#endif
/*-----------------------------------------------------------------------*/
#define SHORT_HELP\
"asmi - read/write Cyclone ASMI configuration device.\n"
#define LONG_HELP\
"\n"\
"asmi erase start [end]\n"\
" - erase sector start or sectors start through end.\n"\
"asmi info\n"\
" - display ASMI device information.\n"\
"asmi protect on | off\n"\
" - turn device protection on or off.\n"\
"asmi read addr offset count\n"\
" - read count bytes from offset to addr.\n"\
"asmi write addr offset count\n"\
" - write count bytes to offset from addr.\n"\
"asmi verify addr offset count\n"\
" - verify count bytes at offset from addr."
/*-----------------------------------------------------------------------*/
/* Operation codes for serial configuration devices
*/
#define ASMI_WRITE_ENA 0x06 /* Write enable */
#define ASMI_WRITE_DIS 0x04 /* Write disable */
#define ASMI_READ_STAT 0x05 /* Read status */
#define ASMI_READ_BYTES 0x03 /* Read bytes */
#define ASMI_READ_ID 0xab /* Read silicon id */
#define ASMI_WRITE_STAT 0x01 /* Write status */
#define ASMI_WRITE_BYTES 0x02 /* Write bytes */
#define ASMI_ERASE_BULK 0xc7 /* Erase entire device */
#define ASMI_ERASE_SECT 0xd8 /* Erase sector */
/* Device status register bits
*/
#define ASMI_STATUS_WIP (1<<0) /* Write in progress */
#define ASMI_STATUS_WEL (1<<1) /* Write enable latch */
static nios_asmi_t *asmi = (nios_asmi_t *)CONFIG_SYS_NIOS_ASMIBASE;
/***********************************************************************
* Device access
***********************************************************************/
static void asmi_cs (int assert)
{
if (assert) {
asmi->control |= NIOS_ASMI_SSO;
} else {
/* Let all bits shift out */
while ((asmi->status & NIOS_ASMI_TMT) == 0)
;
asmi->control &= ~NIOS_ASMI_SSO;
}
}
static void asmi_tx (unsigned char c)
{
while ((asmi->status & NIOS_ASMI_TRDY) == 0)
;
asmi->txdata = c;
}
static int asmi_rx (void)
{
while ((asmi->status & NIOS_ASMI_RRDY) == 0)
;
return (asmi->rxdata);
}
static unsigned char bitrev[] = {
0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e,
0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f
};
static unsigned char asmi_bitrev( unsigned char c )
{
unsigned char val;
val = bitrev[c>>4];
val |= bitrev[c & 0x0f]<<4;
return (val);
}
static void asmi_rcv (unsigned char *dst, int len)
{
while (len--) {
asmi_tx (0);
*dst++ = asmi_rx ();
}
}
static void asmi_rrcv (unsigned char *dst, int len)
{
while (len--) {
asmi_tx (0);
*dst++ = asmi_bitrev (asmi_rx ());
}
}
static void asmi_snd (unsigned char *src, int len)
{
while (len--) {
asmi_tx (*src++);
asmi_rx ();
}
}
static void asmi_rsnd (unsigned char *src, int len)
{
while (len--) {
asmi_tx (asmi_bitrev (*src++));
asmi_rx ();
}
}
static void asmi_wr_enable (void)
{
asmi_cs (1);
asmi_tx (ASMI_WRITE_ENA);
asmi_rx ();
asmi_cs (0);
}
static unsigned char asmi_status_rd (void)
{
unsigned char status;
asmi_cs (1);
asmi_tx (ASMI_READ_STAT);
asmi_rx ();
asmi_tx (0);
status = asmi_rx ();
asmi_cs (0);
return (status);
}
static void asmi_status_wr (unsigned char status)
{
asmi_wr_enable ();
asmi_cs (1);
asmi_tx (ASMI_WRITE_STAT);
asmi_rx ();
asmi_tx (status);
asmi_rx ();
asmi_cs (0);
return;
}
/***********************************************************************
* Device information
***********************************************************************/
typedef struct asmi_devinfo_t {
const char *name; /* Device name */
unsigned char id; /* Device silicon id */
unsigned char size; /* Total size log2(bytes)*/
unsigned char num_sects; /* Number of sectors */
unsigned char sz_sect; /* Sector size log2(bytes) */
unsigned char sz_page; /* Page size log2(bytes) */
unsigned char prot_mask; /* Protection mask */
}asmi_devinfo_t;
static struct asmi_devinfo_t devinfo[] = {
{ "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c },
{ "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c },
{ 0, 0, 0, 0, 0, 0 }
};
static asmi_devinfo_t *asmi_dev_find (void)
{
unsigned char buf[4];
unsigned char id;
int i;
struct asmi_devinfo_t *dev = NULL;
/* Read silicon id requires 3 "dummy bytes" before it's put
* on the wire.
*/
buf[0] = ASMI_READ_ID;
buf[1] = 0;
buf[2] = 0;
buf[3] = 0;
asmi_cs (1);
asmi_snd (buf,4);
asmi_rcv (buf,1);
asmi_cs (0);
id = buf[0];
/* Find the info struct */
i = 0;
while (devinfo[i].name) {
if (id == devinfo[i].id) {
dev = &devinfo[i];
break;
}
i++;
}
return (dev);
}
/***********************************************************************
* Misc Utilities
***********************************************************************/
static unsigned asmi_cfgsz (void)
{
unsigned sz = 0;
unsigned char buf[128];
unsigned char *p;
/* Read in the first 128 bytes of the device */
buf[0] = ASMI_READ_BYTES;
buf[1] = 0;
buf[2] = 0;
buf[3] = 0;
asmi_cs (1);
asmi_snd (buf,4);
asmi_rrcv (buf, sizeof(buf));
asmi_cs (0);
/* Search for the starting 0x6a which is followed by the
* 4-byte 'register' and 4-byte bit-count.
*/
p = buf;
while (p < buf + sizeof(buf)-8) {
if ( *p == 0x6a ) {
/* Point to bit count and extract */
p += 5;
sz = *p++;
sz |= *p++ << 8;
sz |= *p++ << 16;
sz |= *p++ << 24;
/* Convert to byte count */
sz += 7;
sz >>= 3;
} else if (*p == 0xff) {
/* 0xff is ok ... just skip */
p++;
continue;
} else {
/* Not 0xff or 0x6a ... something's not
* right ... report 'unknown' (sz=0).
*/
break;
}
}
return (sz);
}
static int asmi_erase (unsigned start, unsigned end)
{
unsigned off, sectsz;
unsigned char buf[4];
struct asmi_devinfo_t *dev = asmi_dev_find ();
if (!dev || (start>end))
return (-1);
/* Erase the requested sectors. An address is required
* that lies within the requested sector -- we'll just
* use the first address in the sector.
*/
printf ("asmi erasing sector %d ", start);
if (start != end)
printf ("to %d ", end);
sectsz = (1 << dev->sz_sect);
while (start <= end) {
off = start * sectsz;
start++;
buf[0] = ASMI_ERASE_SECT;
buf[1] = off >> 16;
buf[2] = off >> 8;
buf[3] = off;
asmi_wr_enable ();
asmi_cs (1);
asmi_snd (buf,4);
asmi_cs (0);
printf ("."); /* Some user feedback */
/* Wait for erase to complete */
while (asmi_status_rd() & ASMI_STATUS_WIP)
;
}
printf (" done.\n");
return (0);
}
static int asmi_read (ulong addr, ulong off, ulong cnt)
{
unsigned char buf[4];
buf[0] = ASMI_READ_BYTES;
buf[1] = off >> 16;
buf[2] = off >> 8;
buf[3] = off;
asmi_cs (1);
asmi_snd (buf,4);
asmi_rrcv ((unsigned char *)addr, cnt);
asmi_cs (0);
return (0);
}
static
int asmi_write (ulong addr, ulong off, ulong cnt)
{
ulong wrcnt;
unsigned pgsz;
unsigned char buf[4];
struct asmi_devinfo_t *dev = asmi_dev_find ();
if (!dev)
return (-1);
pgsz = (1<<dev->sz_page);
while (cnt) {
if (off % pgsz)
wrcnt = pgsz - (off % pgsz);
else
wrcnt = pgsz;
wrcnt = (wrcnt > cnt) ? cnt : wrcnt;
buf[0] = ASMI_WRITE_BYTES;
buf[1] = off >> 16;
buf[2] = off >> 8;
buf[3] = off;
asmi_wr_enable ();
asmi_cs (1);
asmi_snd (buf,4);
asmi_rsnd ((unsigned char *)addr, wrcnt);
asmi_cs (0);
/* Wait for write to complete */
while (asmi_status_rd() & ASMI_STATUS_WIP)
;
cnt -= wrcnt;
off += wrcnt;
addr += wrcnt;
}
return (0);
}
static
int asmi_verify (ulong addr, ulong off, ulong cnt, ulong *err)
{
ulong rdcnt;
unsigned char buf[256];
unsigned char *start,*end;
int i;
start = end = (unsigned char *)addr;
while (cnt) {
rdcnt = (cnt>sizeof(buf)) ? sizeof(buf) : cnt;
asmi_read ((ulong)buf, off, rdcnt);
for (i=0; i<rdcnt; i++) {
if (*end != buf[i]) {
*err = end - start;
return(-1);
}
end++;
}
cnt -= rdcnt;
off += rdcnt;
}
return (0);
}
static int asmi_sect_erased (int sect, unsigned *offset,
struct asmi_devinfo_t *dev)
{
unsigned char buf[128];
unsigned off, end;
unsigned sectsz;
int i;
sectsz = (1 << dev->sz_sect);
off = sectsz * sect;
end = off + sectsz;
while (off < end) {
asmi_read ((ulong)buf, off, sizeof(buf));
for (i=0; i < sizeof(buf); i++) {
if (buf[i] != 0xff) {
*offset = off + i;
return (0);
}
}
off += sizeof(buf);
}
return (1);
}
/***********************************************************************
* Commands
***********************************************************************/
static
void do_asmi_info (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
int i;
unsigned char stat;
unsigned tmp;
int erased;
/* Basic device info */
printf ("%s: %d kbytes (%d sectors x %d kbytes,"
" %d bytes/page)\n",
dev->name, 1 << (dev->size-10),
dev->num_sects, 1 << (dev->sz_sect-10),
1 << dev->sz_page );
/* Status -- for now protection is all-or-nothing */
stat = asmi_status_rd();
printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n",
stat,
(stat & ASMI_STATUS_WIP) ? 1 : 0,
(stat & ASMI_STATUS_WEL) ? 1 : 0,
(stat & dev->prot_mask) ? "on" : "off" );
/* Configuration */
tmp = asmi_cfgsz ();
if (tmp) {
printf ("config: 0x%06x (%d) bytes\n", tmp, tmp );
} else {
printf ("config: unknown\n" );
}
/* Sector info */
for (i=0; i<dev->num_sects; i++) {
erased = asmi_sect_erased (i, &tmp, dev);
printf (" %d: %06x ",
i, i*(1<<dev->sz_sect) );
if (erased)
printf ("erased\n");
else
printf ("data @ 0x%06x\n", tmp);
}
return;
}
static
void do_asmi_erase (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
unsigned start,end;
if ((argc < 3) || (argc > 4)) {
printf ("USAGE: asmi erase sect [end]\n");
return;
}
if ((asmi_status_rd() & dev->prot_mask) != 0) {
printf ( "asmi: device protected.\n");
return;
}
start = simple_strtoul (argv[2], NULL, 10);
if (argc > 3)
end = simple_strtoul (argv[3], NULL, 10);
else
end = start;
if ((start >= dev->num_sects) || (start > end)) {
printf ("asmi: invalid sector range: [%d:%d]\n",
start, end );
return;
}
asmi_erase (start, end);
return;
}
static
void do_asmi_protect (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
unsigned char stat;
/* For now protection is all-or-nothing to keep things
* simple. The protection bits don't map in a linear
* fashion ... and we would rather protect the bottom
* of the device since it contains the config data and
* leave the top unprotected for app use. But unfortunately
* protection works from top-to-bottom so it does
* really help very much from a software app point-of-view.
*/
if (argc < 3) {
printf ("USAGE: asmi protect on | off\n");
return;
}
if (!dev)
return;
/* Protection on/off is just a matter of setting/clearing
* all protection bits in the status register.
*/
stat = asmi_status_rd ();
if (strcmp ("on", argv[2]) == 0) {
stat |= dev->prot_mask;
} else if (strcmp ("off", argv[2]) == 0 ) {
stat &= ~dev->prot_mask;
} else {
printf ("asmi: unknown protection: %s\n", argv[2]);
return;
}
asmi_status_wr (stat);
return;
}
static
void do_asmi_read (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
ulong addr,off,cnt;
ulong sz;
if (argc < 5) {
printf ("USAGE: asmi read addr offset count\n");
return;
}
sz = 1 << dev->size;
addr = simple_strtoul (argv[2], NULL, 16);
off = simple_strtoul (argv[3], NULL, 16);
cnt = simple_strtoul (argv[4], NULL, 16);
if (off > sz) {
printf ("offset is greater than device size"
"... aborting.\n");
return;
}
if ((off + cnt) > sz) {
printf ("request exceeds device size"
"... truncating.\n");
cnt = sz - off;
}
printf ("asmi: read %08lx <- %06lx (0x%lx bytes)\n",
addr, off, cnt);
asmi_read (addr, off, cnt);
return;
}
static
void do_asmi_write (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
ulong addr,off,cnt;
ulong sz;
ulong err;
if (argc < 5) {
printf ("USAGE: asmi write addr offset count\n");
return;
}
if ((asmi_status_rd() & dev->prot_mask) != 0) {
printf ( "asmi: device protected.\n");
return;
}
sz = 1 << dev->size;
addr = simple_strtoul (argv[2], NULL, 16);
off = simple_strtoul (argv[3], NULL, 16);
cnt = simple_strtoul (argv[4], NULL, 16);
if (off > sz) {
printf ("offset is greater than device size"
"... aborting.\n");
return;
}
if ((off + cnt) > sz) {
printf ("request exceeds device size"
"... truncating.\n");
cnt = sz - off;
}
printf ("asmi: write %08lx -> %06lx (0x%lx bytes)\n",
addr, off, cnt);
asmi_write (addr, off, cnt);
if (asmi_verify (addr, off, cnt, &err) != 0)
printf ("asmi: write error at offset %06lx\n", err);
return;
}
static
void do_asmi_verify (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
ulong addr,off,cnt;
ulong sz;
ulong err;
if (argc < 5) {
printf ("USAGE: asmi verify addr offset count\n");
return;
}
sz = 1 << dev->size;
addr = simple_strtoul (argv[2], NULL, 16);
off = simple_strtoul (argv[3], NULL, 16);
cnt = simple_strtoul (argv[4], NULL, 16);
if (off > sz) {
printf ("offset is greater than device size"
"... aborting.\n");
return;
}
if ((off + cnt) > sz) {
printf ("request exceeds device size"
"... truncating.\n");
cnt = sz - off;
}
printf ("asmi: verify %08lx -> %06lx (0x%lx bytes)\n",
addr, off, cnt);
if (asmi_verify (addr, off, cnt, &err) != 0)
printf ("asmi: verify error at offset %06lx\n", err);
return;
}
/*-----------------------------------------------------------------------*/
int do_asmi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int len;
struct asmi_devinfo_t *dev = asmi_dev_find ();
if (argc < 2) {
printf ("Usage:%s", LONG_HELP);
return (0);
}
if (!dev) {
printf ("asmi: device not found.\n");
return (0);
}
len = strlen (argv[1]);
if (strncmp ("info", argv[1], len) == 0) {
do_asmi_info ( dev, argc, argv);
} else if (strncmp ("erase", argv[1], len) == 0) {
do_asmi_erase (dev, argc, argv);
} else if (strncmp ("protect", argv[1], len) == 0) {
do_asmi_protect (dev, argc, argv);
} else if (strncmp ("read", argv[1], len) == 0) {
do_asmi_read (dev, argc, argv);
} else if (strncmp ("write", argv[1], len) == 0) {
do_asmi_write (dev, argc, argv);
} else if (strncmp ("verify", argv[1], len) == 0) {
do_asmi_verify (dev, argc, argv);
} else {
printf ("asmi: unknown operation: %s\n", argv[1]);
}
return (0);
}
/*-----------------------------------------------------------------------*/
U_BOOT_CMD( asmi, 5, 0, do_asmi, SHORT_HELP, LONG_HELP );
#endif /* CONFIG_NIOS_ASMI */