upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
546 lines
14 KiB
546 lines
14 KiB
18 years ago
|
/*
|
||
|
* ADI Blackfin 537 MAC Ethernet
|
||
|
*
|
||
|
* Copyright (c) 2005 Analog Device, Inc.
|
||
|
*
|
||
|
* See file CREDITS for list of people who contributed to this
|
||
|
* project.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
|
||
|
#include <common.h>
|
||
|
#include <config.h>
|
||
|
#include <asm/blackfin.h>
|
||
|
#include <net.h>
|
||
|
#include <command.h>
|
||
|
#include <malloc.h>
|
||
|
#include "ether_bf537.h"
|
||
|
|
||
|
#ifdef CONFIG_POST
|
||
|
#include <post.h>
|
||
|
#endif
|
||
|
|
||
|
#undef DEBUG_ETHERNET
|
||
|
|
||
|
#ifdef DEBUG_ETHERNET
|
||
|
#define DEBUGF(fmt,args...) printf(fmt,##args)
|
||
|
#else
|
||
|
#define DEBUGF(fmt,args...)
|
||
|
#endif
|
||
|
|
||
|
#if (CONFIG_COMMANDS & CFG_CMD_NET)
|
||
|
|
||
|
#define RXBUF_BASE_ADDR 0xFF900000
|
||
|
#define TXBUF_BASE_ADDR 0xFF800000
|
||
|
#define TX_BUF_CNT 1
|
||
|
|
||
|
#define TOUT_LOOP 1000000
|
||
|
|
||
|
ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT];
|
||
|
ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX];
|
||
|
static u16 txIdx; /* index of the current RX buffer */
|
||
|
static u16 rxIdx; /* index of the current TX buffer */
|
||
|
|
||
|
u8 SrcAddr[6];
|
||
|
u16 PHYregs[NO_PHY_REGS]; /* u16 PHYADDR; */
|
||
|
|
||
|
/* DMAx_CONFIG values at DMA Restart */
|
||
|
const ADI_DMA_CONFIG_REG rxdmacfg = { 1, 1, 2, 0, 0, 0, 0, 5, 7 };
|
||
|
|
||
|
#if 0
|
||
|
rxdmacfg.b_DMA_EN = 1; /* enabled */
|
||
|
rxdmacfg.b_WNR = 1; /* write to memory */
|
||
|
rxdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */
|
||
|
rxdmacfg.b_DMA2D = 0; /* N/A */
|
||
|
rxdmacfg.b_RESTART= 0; /* N/A */
|
||
|
rxdmacfg.b_DI_SEL = 0; /* N/A */
|
||
|
rxdmacfg.b_DI_EN = 0; /* no interrupt */
|
||
|
rxdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */
|
||
|
rxdmacfg.b_FLOW = 7; /* large desc flow */
|
||
|
#endif
|
||
|
|
||
|
const ADI_DMA_CONFIG_REG txdmacfg = { 1, 0, 2, 0, 0, 0, 0, 5, 7 };
|
||
|
|
||
|
#if 0
|
||
|
txdmacfg.b_DMA_EN = 1; /* enabled */
|
||
|
txdmacfg.b_WNR = 0; /* read from memory */
|
||
|
txdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */
|
||
|
txdmacfg.b_DMA2D = 0; /* N/A */
|
||
|
txdmacfg.b_RESTART= 0; /* N/A */
|
||
|
txdmacfg.b_DI_SEL = 0; /* N/A */
|
||
|
txdmacfg.b_DI_EN = 0; /* no interrupt */
|
||
|
txdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */
|
||
|
txdmacfg.b_FLOW = 7; /* large desc flow */
|
||
|
#endif
|
||
|
|
||
|
ADI_ETHER_BUFFER *SetupRxBuffer(int no);
|
||
|
ADI_ETHER_BUFFER *SetupTxBuffer(int no);
|
||
|
|
||
|
static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd);
|
||
|
static void bfin_EMAC_halt(struct eth_device *dev);
|
||
|
static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet,
|
||
|
int length);
|
||
|
static int bfin_EMAC_recv(struct eth_device *dev);
|
||
|
|
||
|
int bfin_EMAC_initialize(bd_t * bis)
|
||
|
{
|
||
|
struct eth_device *dev;
|
||
|
dev = (struct eth_device *)malloc(sizeof(*dev));
|
||
|
if (dev == NULL)
|
||
|
hang();
|
||
|
|
||
|
memset(dev, 0, sizeof(*dev));
|
||
|
sprintf(dev->name, "BF537 ETHERNET");
|
||
|
|
||
|
dev->iobase = 0;
|
||
|
dev->priv = 0;
|
||
|
dev->init = bfin_EMAC_init;
|
||
|
dev->halt = bfin_EMAC_halt;
|
||
|
dev->send = bfin_EMAC_send;
|
||
|
dev->recv = bfin_EMAC_recv;
|
||
|
|
||
|
eth_register(dev);
|
||
|
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet,
|
||
|
int length)
|
||
|
{
|
||
|
int i;
|
||
|
int result = 0;
|
||
|
unsigned int *buf;
|
||
|
buf = (unsigned int *)packet;
|
||
|
|
||
|
if (length <= 0) {
|
||
|
printf("Ethernet: bad packet size: %d\n", length);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
if ((*pDMA2_IRQ_STATUS & DMA_ERR) != 0) {
|
||
|
printf("Ethernet: tx DMA error\n");
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
for (i = 0; (*pDMA2_IRQ_STATUS & DMA_RUN) != 0; i++) {
|
||
|
if (i > TOUT_LOOP) {
|
||
|
puts("Ethernet: tx time out\n");
|
||
|
goto out;
|
||
|
}
|
||
|
}
|
||
|
txbuf[txIdx]->FrmData->NoBytes = length;
|
||
|
memcpy(txbuf[txIdx]->FrmData->Dest, (void *)packet, length);
|
||
|
txbuf[txIdx]->Dma[0].START_ADDR = (u32) txbuf[txIdx]->FrmData;
|
||
|
*pDMA2_NEXT_DESC_PTR = &txbuf[txIdx]->Dma[0];
|
||
|
*pDMA2_CONFIG = *(u16 *) (void *)(&txdmacfg);
|
||
|
*pEMAC_OPMODE |= TE;
|
||
|
|
||
|
for (i = 0; (txbuf[txIdx]->StatusWord & TX_COMP) == 0; i++) {
|
||
|
if (i > TOUT_LOOP) {
|
||
|
puts("Ethernet: tx error\n");
|
||
|
goto out;
|
||
|
}
|
||
|
}
|
||
|
result = txbuf[txIdx]->StatusWord;
|
||
|
txbuf[txIdx]->StatusWord = 0;
|
||
|
if ((txIdx + 1) >= TX_BUF_CNT)
|
||
|
txIdx = 0;
|
||
|
else
|
||
|
txIdx++;
|
||
|
out:
|
||
|
DEBUGF("BFIN EMAC send: length = %d\n", length);
|
||
|
return result;
|
||
|
}
|
||
|
|
||
|
static int bfin_EMAC_recv(struct eth_device *dev)
|
||
|
{
|
||
|
int length = 0;
|
||
|
|
||
|
for (;;) {
|
||
|
if ((rxbuf[rxIdx]->StatusWord & RX_COMP) == 0) {
|
||
|
length = -1;
|
||
|
break;
|
||
|
}
|
||
|
if ((rxbuf[rxIdx]->StatusWord & RX_DMAO) != 0) {
|
||
|
printf("Ethernet: rx dma overrun\n");
|
||
|
break;
|
||
|
}
|
||
|
if ((rxbuf[rxIdx]->StatusWord & RX_OK) == 0) {
|
||
|
printf("Ethernet: rx error\n");
|
||
|
break;
|
||
|
}
|
||
|
length = rxbuf[rxIdx]->StatusWord & 0x000007FF;
|
||
|
if (length <= 4) {
|
||
|
printf("Ethernet: bad frame\n");
|
||
|
break;
|
||
|
}
|
||
|
NetRxPackets[rxIdx] =
|
||
|
(volatile uchar *)(rxbuf[rxIdx]->FrmData->Dest);
|
||
|
NetReceive(NetRxPackets[rxIdx], length - 4);
|
||
|
*pDMA1_IRQ_STATUS |= DMA_DONE | DMA_ERR;
|
||
|
rxbuf[rxIdx]->StatusWord = 0x00000000;
|
||
|
if ((rxIdx + 1) >= PKTBUFSRX)
|
||
|
rxIdx = 0;
|
||
|
else
|
||
|
rxIdx++;
|
||
|
}
|
||
|
|
||
|
return length;
|
||
|
}
|
||
|
|
||
|
/**************************************************************
|
||
|
*
|
||
|
* Ethernet Initialization Routine
|
||
|
*
|
||
|
*************************************************************/
|
||
|
|
||
|
static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd)
|
||
|
{
|
||
|
u32 opmode;
|
||
|
int dat;
|
||
|
int i;
|
||
|
DEBUGF("Eth_init: ......\n");
|
||
|
|
||
|
txIdx = 0;
|
||
|
rxIdx = 0;
|
||
|
|
||
|
/* Initialize System Register */
|
||
|
if (SetupSystemRegs(&dat) < 0)
|
||
|
return -1;
|
||
|
|
||
|
/* Initialize EMAC address */
|
||
|
SetupMacAddr(SrcAddr);
|
||
|
|
||
|
/* Initialize TX and RX buffer */
|
||
|
for (i = 0; i < PKTBUFSRX; i++) {
|
||
|
rxbuf[i] = SetupRxBuffer(i);
|
||
|
if (i > 0) {
|
||
|
rxbuf[i - 1]->Dma[1].NEXT_DESC_PTR =
|
||
|
&(rxbuf[i]->Dma[0]);
|
||
|
if (i == (PKTBUFSRX - 1))
|
||
|
rxbuf[i]->Dma[1].NEXT_DESC_PTR =
|
||
|
&(rxbuf[0]->Dma[0]);
|
||
|
}
|
||
|
}
|
||
|
for (i = 0; i < TX_BUF_CNT; i++) {
|
||
|
txbuf[i] = SetupTxBuffer(i);
|
||
|
if (i > 0) {
|
||
|
txbuf[i - 1]->Dma[1].NEXT_DESC_PTR =
|
||
|
&(txbuf[i]->Dma[0]);
|
||
|
if (i == (TX_BUF_CNT - 1))
|
||
|
txbuf[i]->Dma[1].NEXT_DESC_PTR =
|
||
|
&(txbuf[0]->Dma[0]);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Set RX DMA */
|
||
|
*pDMA1_NEXT_DESC_PTR = &rxbuf[0]->Dma[0];
|
||
|
*pDMA1_CONFIG = *((u16 *) (void *)&rxbuf[0]->Dma[0].CONFIG);
|
||
|
|
||
|
/* Wait MII done */
|
||
|
PollMdcDone();
|
||
|
|
||
|
/* We enable only RX here */
|
||
|
/* ASTP : Enable Automatic Pad Stripping
|
||
|
PR : Promiscuous Mode for test
|
||
|
PSF : Receive frames with total length less than 64 bytes.
|
||
|
FDMODE : Full Duplex Mode
|
||
|
LB : Internal Loopback for test
|
||
|
RE : Receiver Enable */
|
||
|
if (dat == FDMODE)
|
||
|
opmode = ASTP | FDMODE | PSF;
|
||
|
else
|
||
|
opmode = ASTP | PSF;
|
||
|
opmode |= RE;
|
||
|
#ifdef CONFIG_BFIN_MAC_RMII
|
||
|
opmode |= TE | RMII;
|
||
|
#endif
|
||
|
/* Turn on the EMAC */
|
||
|
*pEMAC_OPMODE = opmode;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void bfin_EMAC_halt(struct eth_device *dev)
|
||
|
{
|
||
|
DEBUGF("Eth_halt: ......\n");
|
||
|
/* Turn off the EMAC */
|
||
|
*pEMAC_OPMODE = 0x00000000;
|
||
|
/* Turn off the EMAC RX DMA */
|
||
|
*pDMA1_CONFIG = 0x0000;
|
||
|
*pDMA2_CONFIG = 0x0000;
|
||
|
|
||
|
}
|
||
|
|
||
|
void SetupMacAddr(u8 * MACaddr)
|
||
|
{
|
||
|
char *tmp, *end;
|
||
|
int i;
|
||
|
/* this depends on a little-endian machine */
|
||
|
tmp = getenv("ethaddr");
|
||
|
if (tmp) {
|
||
|
for (i = 0; i < 6; i++) {
|
||
|
MACaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
|
||
|
if (tmp)
|
||
|
tmp = (*end) ? end + 1 : end;
|
||
|
}
|
||
|
|
||
|
#ifndef CONFIG_NETCONSOLE
|
||
|
printf("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n",
|
||
|
MACaddr[0], MACaddr[1],
|
||
|
MACaddr[2], MACaddr[3], MACaddr[4], MACaddr[5]);
|
||
|
#endif
|
||
|
*pEMAC_ADDRLO = MACaddr[0] | MACaddr[1] << 8 |
|
||
|
MACaddr[2] << 16 | MACaddr[3] << 24;
|
||
|
*pEMAC_ADDRHI = MACaddr[4] | MACaddr[5] << 8;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
void PollMdcDone(void)
|
||
|
{
|
||
|
/* poll the STABUSY bit */
|
||
|
while (*pEMAC_STAADD & STABUSY) ;
|
||
|
}
|
||
|
|
||
|
void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data)
|
||
|
{
|
||
|
PollMdcDone();
|
||
|
|
||
|
*pEMAC_STADAT = Data;
|
||
|
|
||
|
*pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) |
|
||
|
STAOP | STAIE | STABUSY;
|
||
|
}
|
||
|
|
||
|
/*********************************************************************************
|
||
|
* Read an off-chip register in a PHY through the MDC/MDIO port *
|
||
|
*********************************************************************************/
|
||
|
u16 RdPHYReg(u16 PHYAddr, u16 RegAddr)
|
||
|
{
|
||
|
u16 Data;
|
||
|
|
||
|
PollMdcDone();
|
||
|
|
||
|
*pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) |
|
||
|
STAIE | STABUSY;
|
||
|
|
||
|
PollMdcDone();
|
||
|
|
||
|
Data = (u16) * pEMAC_STADAT;
|
||
|
|
||
|
PHYregs[RegAddr] = Data; /* save shadow copy */
|
||
|
|
||
|
return Data;
|
||
|
}
|
||
|
|
||
|
void SoftResetPHY(void)
|
||
|
{
|
||
|
u16 phydat;
|
||
|
/* set the reset bit */
|
||
|
WrPHYReg(PHYADDR, PHY_MODECTL, PHY_RESET);
|
||
|
/* and clear it again */
|
||
|
WrPHYReg(PHYADDR, PHY_MODECTL, 0x0000);
|
||
|
do {
|
||
|
/* poll until reset is complete */
|
||
|
phydat = RdPHYReg(PHYADDR, PHY_MODECTL);
|
||
|
} while ((phydat & PHY_RESET) != 0);
|
||
|
}
|
||
|
|
||
|
int SetupSystemRegs(int *opmode)
|
||
|
{
|
||
|
u16 sysctl, phydat;
|
||
|
int count = 0;
|
||
|
/* Enable PHY output */
|
||
|
*pVR_CTL |= PHYCLKOE;
|
||
|
/* MDC = 2.5 MHz */
|
||
|
sysctl = SET_MDCDIV(24);
|
||
|
/* Odd word alignment for Receive Frame DMA word */
|
||
|
/* Configure checksum support and rcve frame word alignment */
|
||
|
sysctl |= RXDWA | RXCKS;
|
||
|
*pEMAC_SYSCTL = sysctl;
|
||
|
/* auto negotiation on */
|
||
|
/* full duplex */
|
||
|
/* 100 Mbps */
|
||
|
phydat = PHY_ANEG_EN | PHY_DUPLEX | PHY_SPD_SET;
|
||
|
WrPHYReg(PHYADDR, PHY_MODECTL, phydat);
|
||
|
do {
|
||
|
udelay(1000);
|
||
|
phydat = RdPHYReg(PHYADDR, PHY_MODESTAT);
|
||
|
if (count > 3000) {
|
||
|
printf
|
||
|
("Link is down, please check your network connection\n");
|
||
|
return -1;
|
||
|
}
|
||
|
count++;
|
||
|
} while (!(phydat & 0x0004));
|
||
|
|
||
|
phydat = RdPHYReg(PHYADDR, PHY_ANLPAR);
|
||
|
|
||
|
if ((phydat & 0x0100) || (phydat & 0x0040))
|
||
|
*opmode = FDMODE;
|
||
|
else
|
||
|
*opmode = 0;
|
||
|
|
||
|
*pEMAC_MMC_CTL = RSTC | CROLL;
|
||
|
|
||
|
/* Initialize the TX DMA channel registers */
|
||
|
*pDMA2_X_COUNT = 0;
|
||
|
*pDMA2_X_MODIFY = 4;
|
||
|
*pDMA2_Y_COUNT = 0;
|
||
|
*pDMA2_Y_MODIFY = 0;
|
||
|
|
||
|
/* Initialize the RX DMA channel registers */
|
||
|
*pDMA1_X_COUNT = 0;
|
||
|
*pDMA1_X_MODIFY = 4;
|
||
|
*pDMA1_Y_COUNT = 0;
|
||
|
*pDMA1_Y_MODIFY = 0;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
ADI_ETHER_BUFFER *SetupRxBuffer(int no)
|
||
|
{
|
||
|
ADI_ETHER_FRAME_BUFFER *frmbuf;
|
||
|
ADI_ETHER_BUFFER *buf;
|
||
|
int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */
|
||
|
int total_size = nobytes_buffer + RECV_BUFSIZE;
|
||
|
|
||
|
buf = (ADI_ETHER_BUFFER *) (RXBUF_BASE_ADDR + no * total_size);
|
||
|
frmbuf =
|
||
|
(ADI_ETHER_FRAME_BUFFER *) (RXBUF_BASE_ADDR + no * total_size +
|
||
|
nobytes_buffer);
|
||
|
|
||
|
memset(buf, 0x00, nobytes_buffer);
|
||
|
buf->FrmData = frmbuf;
|
||
|
memset(frmbuf, 0xfe, RECV_BUFSIZE);
|
||
|
|
||
|
/* set up first desc to point to receive frame buffer */
|
||
|
buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]);
|
||
|
buf->Dma[0].START_ADDR = (u32) buf->FrmData;
|
||
|
buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */
|
||
|
buf->Dma[0].CONFIG.b_WNR = 1; /* Write to memory */
|
||
|
buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
||
|
buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */
|
||
|
buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */
|
||
|
|
||
|
/* set up second desc to point to status word */
|
||
|
buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]);
|
||
|
buf->Dma[1].START_ADDR = (u32) & buf->IPHdrChksum;
|
||
|
buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */
|
||
|
buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */
|
||
|
buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
||
|
buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */
|
||
|
buf->Dma[1].CONFIG.b_NDSIZE = 5; /* must be 0 when FLOW is 0 */
|
||
|
buf->Dma[1].CONFIG.b_FLOW = 7; /* stop */
|
||
|
|
||
|
return buf;
|
||
|
}
|
||
|
|
||
|
ADI_ETHER_BUFFER *SetupTxBuffer(int no)
|
||
|
{
|
||
|
ADI_ETHER_FRAME_BUFFER *frmbuf;
|
||
|
ADI_ETHER_BUFFER *buf;
|
||
|
int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */
|
||
|
int total_size = nobytes_buffer + RECV_BUFSIZE;
|
||
|
|
||
|
buf = (ADI_ETHER_BUFFER *) (TXBUF_BASE_ADDR + no * total_size);
|
||
|
frmbuf =
|
||
|
(ADI_ETHER_FRAME_BUFFER *) (TXBUF_BASE_ADDR + no * total_size +
|
||
|
nobytes_buffer);
|
||
|
|
||
|
memset(buf, 0x00, nobytes_buffer);
|
||
|
buf->FrmData = frmbuf;
|
||
|
memset(frmbuf, 0x00, RECV_BUFSIZE);
|
||
|
|
||
|
/* set up first desc to point to receive frame buffer */
|
||
|
buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]);
|
||
|
buf->Dma[0].START_ADDR = (u32) buf->FrmData;
|
||
|
buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */
|
||
|
buf->Dma[0].CONFIG.b_WNR = 0; /* Read to memory */
|
||
|
buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
||
|
buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */
|
||
|
buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */
|
||
|
|
||
|
/* set up second desc to point to status word */
|
||
|
buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]);
|
||
|
buf->Dma[1].START_ADDR = (u32) & buf->StatusWord;
|
||
|
buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */
|
||
|
buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */
|
||
|
buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */
|
||
|
buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */
|
||
|
buf->Dma[1].CONFIG.b_NDSIZE = 0; /* must be 0 when FLOW is 0 */
|
||
|
buf->Dma[1].CONFIG.b_FLOW = 0; /* stop */
|
||
|
|
||
|
return buf;
|
||
|
}
|
||
|
|
||
|
#if defined(CONFIG_POST) && defined(CFG_POST_ETHER)
|
||
|
int ether_post_test(int flags)
|
||
|
{
|
||
|
uchar buf[64];
|
||
|
int i, value = 0;
|
||
|
int length;
|
||
|
|
||
|
printf("\n--------");
|
||
|
bfin_EMAC_init(NULL, NULL);
|
||
|
/* construct the package */
|
||
|
buf[0] = buf[6] = (unsigned char)(*pEMAC_ADDRLO & 0xFF);
|
||
|
buf[1] = buf[7] = (unsigned char)((*pEMAC_ADDRLO & 0xFF00) >> 8);
|
||
|
buf[2] = buf[8] = (unsigned char)((*pEMAC_ADDRLO & 0xFF0000) >> 16);
|
||
|
buf[3] = buf[9] = (unsigned char)((*pEMAC_ADDRLO & 0xFF000000) >> 24);
|
||
|
buf[4] = buf[10] = (unsigned char)(*pEMAC_ADDRHI & 0xFF);
|
||
|
buf[5] = buf[11] = (unsigned char)((*pEMAC_ADDRHI & 0xFF00) >> 8);
|
||
|
buf[12] = 0x08; /* Type: ARP */
|
||
|
buf[13] = 0x06;
|
||
|
buf[14] = 0x00; /* Hardware type: Ethernet */
|
||
|
buf[15] = 0x01;
|
||
|
buf[16] = 0x08; /* Protocal type: IP */
|
||
|
buf[17] = 0x00;
|
||
|
buf[18] = 0x06; /* Hardware size */
|
||
|
buf[19] = 0x04; /* Protocol size */
|
||
|
buf[20] = 0x00; /* Opcode: request */
|
||
|
buf[21] = 0x01;
|
||
|
|
||
|
for (i = 0; i < 42; i++)
|
||
|
buf[i + 22] = i;
|
||
|
printf("--------Send 64 bytes......\n");
|
||
|
bfin_EMAC_send(NULL, (volatile void *)buf, 64);
|
||
|
for (i = 0; i < 100; i++) {
|
||
|
udelay(10000);
|
||
|
if ((rxbuf[rxIdx]->StatusWord & RX_COMP) != 0) {
|
||
|
value = 1;
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
if (value == 0) {
|
||
|
printf("--------EMAC can't receive any data\n");
|
||
|
eth_halt();
|
||
|
return -1;
|
||
|
}
|
||
|
length = rxbuf[rxIdx]->StatusWord & 0x000007FF - 4;
|
||
|
for (i = 0; i < length; i++) {
|
||
|
if (rxbuf[rxIdx]->FrmData->Dest[i] != buf[i]) {
|
||
|
printf("--------EMAC receive error data!\n");
|
||
|
eth_halt();
|
||
|
return -1;
|
||
|
}
|
||
|
}
|
||
|
printf("--------receive %d bytes, matched\n", length);
|
||
|
bfin_EMAC_halt(NULL);
|
||
|
return 0;
|
||
|
}
|
||
|
#endif
|
||
|
#endif /* CFG_CMD_NET */
|