upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
49 lines
1.2 KiB
49 lines
1.2 KiB
21 years ago
|
JSE Configuration Details
|
||
|
|
||
|
Memory Bank 0 -- Flash chip
|
||
|
---------------------------
|
||
|
|
||
|
0xfff00000 - 0xffffffff
|
||
|
|
||
|
The flash chip is really only 512Kbytes, but the high address bit of
|
||
|
the 1Meg region is ignored, so the flash is replicated through the
|
||
|
region. Thus, this is consistent with a flash base address 0xfff80000.
|
||
|
|
||
|
The placement at the end is to be consistent with reset behavior,
|
||
|
where the processor itself initially uses this bus to load the branch
|
||
|
vector and start running.
|
||
|
|
||
|
On-Chip Memory
|
||
|
--------------
|
||
|
|
||
|
0xf4000000 - 0xf4000fff
|
||
|
|
||
|
The 405GPr includes a 4K on-chip memory that can be placed however
|
||
|
software chooses. I choose to place the memory at this address, to
|
||
|
keep it out of the cachable areas.
|
||
|
|
||
|
|
||
|
Memory Bank 1 -- SystemACE Controller
|
||
|
-------------------------------------
|
||
|
|
||
|
0xf0000000 - 0xf00fffff
|
||
|
|
||
|
The SystemACE chip is along on peripheral bank CS#1. We don't need
|
||
|
much space, but 1Meg is the smallest we can configure the chip to
|
||
|
allocate. We need it far away from the flash region, because this
|
||
|
region is set to be non-cached.
|
||
|
|
||
|
|
||
|
Internal Peripherals
|
||
|
--------------------
|
||
|
|
||
|
0xef600300 - 0xef6008ff
|
||
|
|
||
|
These are scattered various peripherals internal to the PPC405GPr
|
||
|
chip.
|
||
|
|
||
|
SDRAM
|
||
|
-----
|
||
|
|
||
|
0x00000000 - 0x07ffffff (128 MBytes)
|