upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/r360mpi/r360mpi.c

424 lines
11 KiB

22 years ago
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <mpc8xx.h>
#include <i2c.h>
#include <commproc.h>
#include <command.h>
#include <cmd_bsp.h>
#include <malloc.h>
#include <linux/types.h>
#include <linux/string.h> /* for strdup */
/*
* Memory Controller Using
*
* CS0 - Flash memory (0x40000000)
* CS1 - SDRAM (0x00000000}
* CS2 -
* CS3 -
* CS4 -
* CS5 -
* CS6 - PCMCIA device
* CS7 - PCMCIA device
*/
/* ------------------------------------------------------------------------- */
#define _not_used_ 0xffffffff
const uint sdram_table[]=
{
/* single read. (offset 0 in upm RAM) */
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
0x1ff77c47,
/* MRS initialization (offset 5) */
0x1ff77c34, 0xefeabc34, 0x1fb57c35,
/* burst read. (offset 8 in upm RAM) */
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
_not_used_, _not_used_, _not_used_, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
/* single write. (offset 18 in upm RAM) */
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
_not_used_, _not_used_, _not_used_, _not_used_,
/* burst write. (offset 20 in upm RAM) */
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
/* refresh. (offset 30 in upm RAM) */
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
/* exception. (offset 3c in upm RAM) */
0x7ffffc07, _not_used_, _not_used_, _not_used_ };
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
puts ("Board: R360 MPI Board\n");
return 0;
}
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size8, size9;
long int size_b0 = 0;
unsigned long reg;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 1 to the SDRAM bank at
* preliminary address - these have to be modified after the
* SDRAM size has been determined.
*/
memctl->memc_or1 = CFG_OR1_PRELIM;
memctl->memc_br1 = CFG_BR1_PRELIM;
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
udelay (200);
memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */
udelay (200);
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
/*
* Check Bank 0 Memory Size for re-configuration
*
* try 8 column mode
*/
size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE1_PRELIM,
SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE1_PRELIM,
SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size_b0 = size8;
memctl->memc_mamr = CFG_MAMR_8COL;
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
udelay (1000);
/*
* Adjust refresh rate depending on SDRAM type, both banks
* For types > 128 MBit leave it at the current (fast) rate
*/
if ((size_b0 < 0x02000000)) {
/* reduce to 15.6 us (62.4 us / quad) */
memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping
*/
memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
udelay (10000);
return (size_b0);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
volatile long int *addr;
ulong cnt, val;
ulong save[32]; /* to make test non-destructive */
unsigned char i = 0;
memctl->memc_mamr = mamr_value;
for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
addr = base + cnt; /* pointer arith! */
save[i++] = *addr;
*addr = ~cnt;
}
/* write 0 to base address */
addr = base;
save[i] = *addr;
*addr = 0;
/* check at base address */
if ((val = *addr) != 0) {
*addr = save[i];
return (0);
}
for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
addr = base + cnt; /* pointer arith! */
val = *addr;
*addr = save[--i];
if (val != (~cnt)) {
return (cnt * sizeof (long));
}
}
return (maxsize);
}
/* ------------------------------------------------------------------------- */
void r360_pwm_write (uchar reg, uchar val)
{
if (i2c_write (CFG_I2C_PWM_ADDR, reg, 1, &val, 1)) {
printf ("Can't write PWM register 0x%02X.\n", reg);
}
}
/* ------------------------------------------------------------------------- */
/*-----------------------------------------------------------------------
* Keyboard Controller
*/
/* Number of bytes returned from Keyboard Controller */
#define KEYBD_KEY_MAX 20 /* maximum key number */
#define KEYBD_DATALEN ((KEYBD_KEY_MAX + 7) / 8) /* normal key scan data */
static uchar kbd_addr = CFG_I2C_KBD_ADDR;
static uchar *key_match (uchar *);
int misc_init_r (void)
{
uchar kbd_data[KEYBD_DATALEN];
uchar keybd_env[2 * KEYBD_DATALEN + 1];
uchar *str;
int i;
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
for (i = 0; i < KEYBD_DATALEN; ++i) {
sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
}
setenv ("keybd", keybd_env);
str = strdup (key_match (kbd_data)); /* decode keys */
#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */
setenv ("preboot", str); /* set or delete definition */
#endif /* CONFIG_PREBOOT */
if (str != NULL) {
free (str);
}
return (0);
}
/*-----------------------------------------------------------------------
* Check if pressed key(s) match magic sequence,
* and return the command string associated with that key(s).
*
* If no key press was decoded, NULL is returned.
*
* Note: the first character of the argument will be overwritten with
* the "magic charcter code" of the decoded key(s), or '\0'.
*
*
* Note: the string points to static environment data and must be
* saved before you call any function that modifies the environment.
*/
#ifdef CONFIG_PREBOOT
static uchar kbd_magic_prefix[] = "key_magic";
static uchar kbd_command_prefix[] = "key_cmd";
static uchar *key_match (uchar * kbd_data)
{
uchar compare[KEYBD_DATALEN];
uchar magic[sizeof (kbd_magic_prefix) + 1];
uchar cmd_name[sizeof (kbd_command_prefix) + 1];
uchar key_mask;
uchar *str, *nxt, *suffix;
uchar *kbd_magic_keys;
char *cmd;
int i;
/*
* The following string defines the characters that can pe appended
* to "key_magic" to form the names of environment variables that
* hold "magic" key codes, i. e. such key codes that can cause
* pre-boot actions. If the string is empty (""), then only
* "key_magic" is checked (old behaviour); the string "125" causes
* checks for "key_magic1", "key_magic2" and "key_magic5", etc.
*/
if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
kbd_magic_keys = "";
/* loop over all magic keys;
* use '\0' suffix in case of empty string
*/
for (suffix=kbd_magic_keys; *suffix || suffix==kbd_magic_keys; ++suffix) {
sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
#if 0
printf ("### Check magic \"%s\"\n", magic);
#endif
memcpy(compare, kbd_data, KEYBD_DATALEN);
for (str = getenv(magic); str != NULL; str = (*nxt) ? nxt+1 : nxt) {
uchar c;
c = (uchar) simple_strtoul (str, (char **) (&nxt), 16);
if (str == nxt) /* invalid character */
break;
if (c >= KEYBD_KEY_MAX) /* bad key number */
goto next_magic;
key_mask = 0x80 >> (c % 8);
if (!(compare[c / 8] & key_mask)) /* key not pressed */
goto next_magic;
compare[c / 8] &= ~key_mask;
}
for (i=0; i<KEYBD_DATALEN; i++)
if (compare[i]) /* key(s) not released */
goto next_magic;
sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
cmd = getenv (cmd_name);
#if 0
printf ("### Set PREBOOT to $(%s): \"%s\"\n",
cmd_name, cmd ? cmd : "<<NULL>>");
#endif
*kbd_data = *suffix;
return (cmd);
next_magic:;
}
#if 0
printf ("### Delete PREBOOT\n");
#endif
*kbd_data = '\0';
return (NULL);
}
#endif /* CONFIG_PREBOOT */
/* Read Keyboard status */
int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
uchar kbd_data[KEYBD_DATALEN];
uchar keybd_env[2 * KEYBD_DATALEN + 1];
int i;
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
/* Read keys */
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
puts ("Keys:");
for (i = 0; i < KEYBD_DATALEN; ++i) {
sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
printf (" %02x", kbd_data[i]);
}
putc ('\n');
setenv ("keybd", keybd_env);
return 0;
}