u-boot/include/configs/mx6memcal.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2010-2018 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the virtual mx6memcal board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SPL */

#include "mx6_common.h"
#include "imx6_spl.h"

#undef CONFIG_MMC
#undef CONFIG_SPL_MMC_SUPPORT
#undef CONFIG_GENERIC_MMC
#undef CONFIG_CMD_FUSE

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x20000000
#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)

#define CONFIG_MXC_UART
#ifdef CONFIG_SERIAL_CONSOLE_UART1
#if defined(CONFIG_MX6SL)
#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
#else
#define CONFIG_MXC_UART_BASE		UART1_BASE
#endif
#elif defined(CONFIG_SERIAL_CONSOLE_UART2)
#define CONFIG_MXC_UART_BASE		UART2_BASE
#else
#error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx)
#endif
#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_MXC_USB_PORTSC	PORT_PTS_UTMI

#endif	       /* __CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 7 years ago			`/* SPDX-License-Identifier: GPL-2.0+ */`
mx6: Add board mx6memcal for use in validating DDR This is a virtual "board" that uses configuration files and Kconfig to define the memory layout used by a real board during the board bring-up process. It generates an SPL image that can be loaded using imx_usb or SB_LOADER.exe. When run, it will generate a set of calibration constants for use in either or both a DCD configuration file for boards that use u-boot.imx or struct mx6_mmdc_calibration for boards that boot via SPL. In essence, it is a configurable, open-source variant of the Freescale ddr-stress tool. https://community.nxp.com/docs/DOC-105652 File mx6memcal_defconfig configures the board for use with mx6sabresd or mx6qsabreauto. Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> 7 years ago			`/*`
mx6memcal: fix comment in board header file The board header file included a reference to the starting point from nitrogen6x.h, but since so much changed, the file bears little resemblance to that file. Signed-off-by: Eric Nelson <eric@nelint.com> 7 years ago			`* Copyright (C) 2010-2018 Freescale Semiconductor, Inc.`
mx6: Add board mx6memcal for use in validating DDR This is a virtual "board" that uses configuration files and Kconfig to define the memory layout used by a real board during the board bring-up process. It generates an SPL image that can be loaded using imx_usb or SB_LOADER.exe. When run, it will generate a set of calibration constants for use in either or both a DCD configuration file for boards that use u-boot.imx or struct mx6_mmdc_calibration for boards that boot via SPL. In essence, it is a configurable, open-source variant of the Freescale ddr-stress tool. https://community.nxp.com/docs/DOC-105652 File mx6memcal_defconfig configures the board for use with mx6sabresd or mx6qsabreauto. Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> 7 years ago			`*`
mx6memcal: fix comment in board header file The board header file included a reference to the starting point from nitrogen6x.h, but since so much changed, the file bears little resemblance to that file. Signed-off-by: Eric Nelson <eric@nelint.com> 7 years ago			`* Configuration settings for the virtual mx6memcal board.`
mx6: Add board mx6memcal for use in validating DDR This is a virtual "board" that uses configuration files and Kconfig to define the memory layout used by a real board during the board bring-up process. It generates an SPL image that can be loaded using imx_usb or SB_LOADER.exe. When run, it will generate a set of calibration constants for use in either or both a DCD configuration file for boards that use u-boot.imx or struct mx6_mmdc_calibration for boards that boot via SPL. In essence, it is a configurable, open-source variant of the Freescale ddr-stress tool. https://community.nxp.com/docs/DOC-105652 File mx6memcal_defconfig configures the board for use with mx6sabresd or mx6qsabreauto. Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> 7 years ago			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`/* SPL */`

			`#include "mx6_common.h"`
			`#include "imx6_spl.h"`

			`#undef CONFIG_MMC`
			`#undef CONFIG_SPL_MMC_SUPPORT`
			`#undef CONFIG_GENERIC_MMC`
			`#undef CONFIG_CMD_FUSE`

			`#define CONFIG_SYS_MEMTEST_START 0x10000000`
			`#define CONFIG_SYS_MEMTEST_END 0x20000000`
			`#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)`

			`#define CONFIG_MXC_UART`
			`#ifdef CONFIG_SERIAL_CONSOLE_UART1`
			`#if defined(CONFIG_MX6SL)`
			`#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR`
			`#else`
			`#define CONFIG_MXC_UART_BASE UART1_BASE`
			`#endif`
			`#elif defined(CONFIG_SERIAL_CONSOLE_UART2)`
			`#define CONFIG_MXC_UART_BASE UART2_BASE`
			`#else`
			`#error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx)`
			`#endif`
			`#define CONFIG_BAUDRATE 115200`

			`#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16)`

			`/* Physical Memory Map */`
			`#define CONFIG_NR_DRAM_BANKS 1`
			`#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR`

			`#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM`
			`#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR`
			`#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE`

			`#define CONFIG_SYS_INIT_SP_OFFSET \`
			`(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)`
			`#define CONFIG_SYS_INIT_SP_ADDR \`
			`(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)`

			`#define CONFIG_ENV_SIZE (8 * 1024)`

mx6memcal: enable SDP support The initial implementation of mx6memcal reset the CPU after running the memory calibration procedure because the generic board has no information about which boot devices are available. Now that we have SDP support in SPL, use it to allow a full U-Boot to be uploaded (i.e. to use "mtest"). Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> 7 years ago			`#define CONFIG_MXC_USB_PORTSC PORT_PTS_UTMI`

mx6: Add board mx6memcal for use in validating DDR This is a virtual "board" that uses configuration files and Kconfig to define the memory layout used by a real board during the board bring-up process. It generates an SPL image that can be loaded using imx_usb or SB_LOADER.exe. When run, it will generate a set of calibration constants for use in either or both a DCD configuration file for boards that use u-boot.imx or struct mx6_mmdc_calibration for boards that boot via SPL. In essence, it is a configurable, open-source variant of the Freescale ddr-stress tool. https://community.nxp.com/docs/DOC-105652 File mx6memcal_defconfig configures the board for use with mx6sabresd or mx6qsabreauto. Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> 7 years ago			`#endif /* __CONFIG_H */`