upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/actux1/actux1_hw.h

58 lines
2.2 KiB

/*
* (C) Copyright 2007
* Michael Schwingen, michael@schwingen.org
*
* hardware register definitions for the AcTux-1 board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _ACTUX1_HW_H
#define _ACTUX1_HW_H
/* 0 = LED off,1 = green, 2 = red, 3 = orange */
#define ACTUX1_LED1(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0)
#define ACTUX1_LED2(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1)
#define ACTUX1_LED3(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2)
#define ACTUX1_LED4(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 3)
#define ACTUX1_LED5(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 4)
#define ACTUX1_LED6(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 5)
#define ACTUX1_LED7(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 6)
#define ACTUX1_HS(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7)
#define ACTUX1_HS_DCD 0x01
#define ACTUX1_HS_DSR 0x02
#define ACTUX1_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS
#define ACTUX1_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
/* GPIO settings */
#define CONFIG_SYS_GPIO_PCI1_INTA 2
#define CONFIG_SYS_GPIO_PCI2_INTA 3
#define CONFIG_SYS_GPIO_I2C_SDA 4
#define CONFIG_SYS_GPIO_I2C_SCL 5
#define CONFIG_SYS_GPIO_DBGJUMPER 9
#define CONFIG_SYS_GPIO_BUTTON1 10
#define CONFIG_SYS_GPIO_DBGSENSE 11
#define CONFIG_SYS_GPIO_DTR 12
#define CONFIG_SYS_GPIO_IORST 13 /* Out */
#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
#endif