|
|
|
/*
|
|
|
|
* Copyright (C) 2011 Andes Technology Corporation
|
|
|
|
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
|
|
#define __CONFIG_H
|
|
|
|
|
|
|
|
#include <asm/arch/ag102.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* CPU and Board Configuration Options
|
|
|
|
*/
|
|
|
|
#define CONFIG_ADP_AG102
|
|
|
|
|
|
|
|
#define CONFIG_USE_INTERRUPT
|
|
|
|
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
#define CONFIG_MEM_REMAP
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x04200000
|
|
|
|
#else
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Timer
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_CLK_FREQ (66000000 * 2)
|
|
|
|
#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Use Externel CLOCK or PCLK
|
|
|
|
*/
|
|
|
|
#undef CONFIG_FTRTC010_EXTCLK
|
|
|
|
|
|
|
|
#ifndef CONFIG_FTRTC010_EXTCLK
|
|
|
|
#define CONFIG_FTRTC010_PCLK
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_FTRTC010_EXTCLK
|
|
|
|
#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
|
|
|
|
#else
|
|
|
|
#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define TIMER_LOAD_VAL 0xffffffff
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Real Time Clock
|
|
|
|
*/
|
|
|
|
#define CONFIG_RTC_FTRTC010
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Real Time Clock Divider
|
|
|
|
* RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
|
|
|
|
*/
|
|
|
|
#define OSC_5MHZ (5*1000000)
|
|
|
|
#define OSC_CLK (2*OSC_5MHZ)
|
|
|
|
#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Serial console configuration
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* FTUART is a high speed NS 16C550A compatible UART */
|
|
|
|
#define CONFIG_BAUDRATE 38400
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
#define CONFIG_SYS_NS16550
|
|
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
|
|
#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_01_BASE
|
|
|
|
#define CONFIG_SYS_NS16550_REG_SIZE -4
|
|
|
|
#define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ethernet
|
|
|
|
*/
|
|
|
|
#define CONFIG_NET_MULTI
|
|
|
|
#define CONFIG_PHY_MAX_ADDR 32 /* this comes from <linux/phy.h> */
|
|
|
|
#define CONFIG_SYS_DISCOVER_PHY
|
|
|
|
#define CONFIG_FTGMAC100
|
|
|
|
#define CONFIG_FTGMAC100_EGIGA
|
|
|
|
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
|
|
|
|
/*
|
|
|
|
* SD (MMC) controller
|
|
|
|
*/
|
|
|
|
#define CONFIG_MMC
|
|
|
|
#define CONFIG_CMD_MMC
|
|
|
|
#define CONFIG_GENERIC_MMC
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_FTSDC010
|
|
|
|
#define CONFIG_FTSDC010_NUMBER 1
|
|
|
|
#define CONFIG_FTSDC010_SDIO
|
|
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#define CONFIG_CMD_EXT2
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Command line configuration.
|
|
|
|
*/
|
|
|
|
#include <config_cmd_default.h>
|
|
|
|
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
|
|
#define CONFIG_CMD_DATE
|
|
|
|
#define CONFIG_CMD_PING
|
|
|
|
#define CONFIG_CMD_IDE
|
|
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#define CONFIG_CMD_ELF
|
|
|
|
|
|
|
|
#undef CONFIG_CMD_FLASH
|
|
|
|
#undef CONFIG_CMD_IMLS
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCI
|
|
|
|
*/
|
|
|
|
#define CONFIG_PCI
|
|
|
|
#define CONFIG_FTPCI100
|
|
|
|
#define CONFIG_PCI_INDIRECT_BRIDGE
|
|
|
|
#define CONFIG_FTPCI100_MEM_BASE 0xa0000000
|
|
|
|
#define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */
|
|
|
|
#define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */
|
|
|
|
#define CONFIG_FTPCI100_MEM_BASE_SIZE1 0x50
|
|
|
|
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0xa0000000
|
|
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
|
|
#define CONFIG_PCI_MEM_SIZE 0x01000000 /* 256M */
|
|
|
|
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x90000000
|
|
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
|
|
#define CONFIG_PCI_IO_SIZE 0x00100000 /* 1M */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* USB
|
|
|
|
*/
|
|
|
|
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
|
|
|
|
#if defined(CONFIG_FTPCI100)
|
|
|
|
#define __io /* enable outl & inl */
|
|
|
|
#define CONFIG_CMD_USB
|
|
|
|
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 5
|
|
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
#define CONFIG_USB_EHCI
|
|
|
|
#define CONFIG_PCI_EHCI_DEVICE 0
|
|
|
|
#define CONFIG_USB_EHCI_PCI
|
|
|
|
#define CONFIG_PREBOOT "usb start;"
|
|
|
|
#endif /* #if defiend(CONFIG_FTPCI100) */
|
|
|
|
#endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IDE/ATA stuff
|
|
|
|
*/
|
|
|
|
#define __io
|
|
|
|
#define CONFIG_IDE_AHB
|
|
|
|
#define CONFIG_IDE_FTIDE020
|
|
|
|
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
|
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
|
|
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
|
|
|
|
#define CONFIG_IDE_PREINIT 1 /* preinit for ide */
|
|
|
|
|
|
|
|
/* max: 2 IDE busses */
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* origin: 2 */
|
|
|
|
/* max: 2 drives per IDE bus */
|
|
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* origin: (MAXBUS * 2) */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_FTIDE020S_BASE
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
|
|
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0000
|
|
|
|
|
|
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* for data I/O */
|
|
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* for normal regs access */
|
|
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* for alternate regs */
|
|
|
|
|
|
|
|
#define CONFIG_MAC_PARTITION
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_SUPPORT_VFAT
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Miscellaneous configurable options
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
|
|
#define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */
|
|
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
|
|
|
|
/* Print Buffer Size */
|
|
|
|
#define CONFIG_SYS_PBSIZE \
|
|
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
|
|
|
|
/* max number of command args */
|
|
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
|
|
|
|
|
|
/* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Size of malloc() pool
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* AHB Controller configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_FTAHBC020S
|
|
|
|
|
|
|
|
#ifdef CONFIG_FTAHBC020S
|
|
|
|
#include <faraday/ftahbc020s.h>
|
|
|
|
|
|
|
|
/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
|
|
|
|
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
|
|
|
|
|
|
|
|
/*
|
|
|
|
* CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
|
|
|
|
* hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
|
|
|
|
* in C language.
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
|
|
|
|
(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
|
|
|
|
FTAHBC020S_SLAVE_BSR_SIZE(0xb))
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Watchdog
|
|
|
|
*/
|
|
|
|
#define CONFIG_FTWDT010_WATCHDOG
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PCU Power Control Unit configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_ANDES_PCU
|
|
|
|
|
|
|
|
#ifdef CONFIG_ANDES_PCU
|
|
|
|
#include <andestech/andes_pcu.h>
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DDR DRAM controller configuration
|
|
|
|
*/
|
|
|
|
#define CONFIG_DWCDDR21MCTL
|
|
|
|
|
|
|
|
#ifdef CONFIG_DWCDDR21MCTL
|
|
|
|
#include <synopsys/dwcddr21mctl.h>
|
|
|
|
/* DCR:
|
|
|
|
* 2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend
|
|
|
|
* 1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk
|
|
|
|
* 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks)
|
|
|
|
* 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank)
|
|
|
|
* 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks)
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_CCR 0x00020004
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_CCR2 (DWCDDR21MCTL_CCR_DTT(0x1) | \
|
|
|
|
DWCDDR21MCTL_CCR_DFTLM(0x4) | \
|
|
|
|
DWCDDR21MCTL_CCR_HOSTEN(0x1))
|
|
|
|
|
|
|
|
/* 0x04: 0x000020d4 */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_DCR 0x000020ca
|
|
|
|
|
|
|
|
/* 0x08: 0x0000000f */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_IOCR 0x0000000f
|
|
|
|
|
|
|
|
/* 0x10: 0x00034812 */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_DRR (DWCDDR21MCTL_DRR_TRFC(0x12) | \
|
|
|
|
DWCDDR21MCTL_DRR_TRFPRD(0x0348))
|
|
|
|
/* 0x24 */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_DLLCR0 DWCDDR21MCTL_DLLCR_PHASE(0x0)
|
|
|
|
|
|
|
|
/* 0x4c: 0x00000040 */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_RSLR0 0x00000040
|
|
|
|
|
|
|
|
/* 0x5c: 0x000055CF */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_RDGR0 0x000055cf
|
|
|
|
|
|
|
|
/* 0xa4: 0x00100000 */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_DTAR (DWCDDR21MCTL_DTAR_DTBANK(0x0) | \
|
|
|
|
DWCDDR21MCTL_DTAR_DTROW(0x0100) | \
|
|
|
|
DWCDDR21MCTL_DTAR_DTCOL(0x0))
|
|
|
|
/* 0x1f0: 0x00000852 */
|
|
|
|
#define CONFIG_SYS_DWCDDR21MCTL_MR (DWCDDR21MCTL_MR_WR(0x4) | \
|
|
|
|
DWCDDR21MCTL_MR_CL(0x5) | \
|
|
|
|
DWCDDR21MCTL_MR_BL(0x2))
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Physical Memory Map
|
|
|
|
*/
|
|
|
|
#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
|
|
|
|
#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
|
|
|
|
#if defined(CONFIG_MEM_REMAP)
|
|
|
|
#define PHYS_SDRAM_0_AT_INIT 0x80000000 /* SDRAM Bank #1 before remap*/
|
|
|
|
#endif
|
|
|
|
#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
|
|
|
|
#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
|
|
#define PHYS_SDRAM_0_SIZE 0x10000000 /* 256 MB */
|
|
|
|
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
|
|
|
|
|
|
|
|
#ifdef CONFIG_MEM_REMAP
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
|
|
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#else
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
|
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#endif /* CONFIG_MEM_REMAP */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Load address and memory test area should agree with
|
|
|
|
* board/faraday/a320/config.mk
|
|
|
|
* Be careful not to overwrite U-boot itself.
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x0CF00000
|
|
|
|
|
|
|
|
/* memtest works on 63 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
|
|
|
|
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Static memory controller configuration
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* FLASH and environment organization
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Env Storage Settings
|
|
|
|
*/
|
|
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
|
|
#define CONFIG_ENV_SIZE 4096
|
|
|
|
|
|
|
|
#endif /* __CONFIG_H */
|