upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/cogent/lcd.c

246 lines
6.0 KiB

22 years ago
/* most of this is taken from the file */
/* hal/powerpc/cogent/current/src/hal_diag.c in the */
/* Cygnus eCos source. Here is the copyright notice: */
/* */
/*============================================================================= */
/* */
/* hal_diag.c */
/* */
/* HAL diagnostic output code */
/* */
/*============================================================================= */
/*####COPYRIGHTBEGIN#### */
/* */
/* ------------------------------------------- */
/* The contents of this file are subject to the Cygnus eCos Public License */
/* Version 1.0 (the "License"); you may not use this file except in */
/* compliance with the License. You may obtain a copy of the License at */
/* http://sourceware.cygnus.com/ecos */
/* */
/* Software distributed under the License is distributed on an "AS IS" */
/* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the */
/* License for the specific language governing rights and limitations under */
/* the License. */
/* */
/* The Original Code is eCos - Embedded Cygnus Operating System, released */
/* September 30, 1998. */
/* */
/* The Initial Developer of the Original Code is Cygnus. Portions created */
/* by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions. All Rights Reserved. */
/* ------------------------------------------- */
/* */
/*####COPYRIGHTEND#### */
/*============================================================================= */
/*#####DESCRIPTIONBEGIN#### */
/* */
/* Author(s): nickg, jskov */
/* Contributors: nickg, jskov */
/* Date: 1999-03-23 */
/* Purpose: HAL diagnostic output */
/* Description: Implementations of HAL diagnostic output support. */
/* */
/*####DESCRIPTIONEND#### */
/* */
/*============================================================================= */
/*----------------------------------------------------------------------------- */
/* Cogent board specific LCD code */
#include <common.h>
#include <stdarg.h>
#include <board/cogent/lcd.h>
static char lines[2][LCD_LINE_LENGTH+1];
static int curline;
static int linepos;
static int heartbeat_active;
/* make the next two strings exactly LCD_LINE_LENGTH (16) chars long */
/* pad to the right with spaces if necessary */
static char init_line0[LCD_LINE_LENGTH+1] = "U-Boot Cogent ";
static char init_line1[LCD_LINE_LENGTH+1] = "mjj, 11 Aug 2000";
static inline unsigned char
lcd_read_status(cma_mb_lcd *clp)
{
/* read the Busy Status Register */
return (cma_mb_reg_read(&clp->lcd_bsr));
}
static inline void
lcd_wait_not_busy(cma_mb_lcd *clp)
{
/*
* wait for not busy
* Note: It seems that the LCD isn't quite ready to process commands
* when it clears the BUSY flag. Reading the status address an extra
* time seems to give it enough breathing room.
*/
while (lcd_read_status(clp) & LCD_STAT_BUSY)
;
(void)lcd_read_status(clp);
}
static inline void
lcd_write_command(cma_mb_lcd *clp, unsigned char cmd)
{
lcd_wait_not_busy(clp);
/* write the Command Register */
cma_mb_reg_write(&clp->lcd_cmd, cmd);
}
static inline void
lcd_write_data(cma_mb_lcd *clp, unsigned char data)
{
lcd_wait_not_busy(clp);
/* write the Current Character Register */
cma_mb_reg_write(&clp->lcd_ccr, data);
}
static inline void
lcd_dis(int addr, char *string)
{
cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
int pos, linelen;
linelen = LCD_LINE_LENGTH;
if (heartbeat_active && addr == LCD_LINE0)
linelen--;
lcd_write_command(clp, LCD_CMD_ADD + addr);
for (pos = 0; *string != '\0' && pos < linelen; pos++)
lcd_write_data(clp, *string++);
22 years ago
}
void
lcd_init(void)
{
cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
int i;
/* configure the lcd for 8 bits/char, 2 lines and 5x7 dot matrix */
lcd_write_command(clp, LCD_CMD_MODE);
/* turn the LCD display on */
lcd_write_command(clp, LCD_CMD_DON);
curline = 0;
linepos = 0;
for (i = 0; i < LCD_LINE_LENGTH; i++) {
lines[0][i] = init_line0[i];
22 years ago
lines[1][i] = init_line1[i];
}
lines[0][LCD_LINE_LENGTH] = lines[1][LCD_LINE_LENGTH] = 0;
lcd_dis(LCD_LINE0, lines[0]);
lcd_dis(LCD_LINE1, lines[1]);
printf("HD44780 2 line x %d char display\n", LCD_LINE_LENGTH);
}
void
lcd_write_char(const char c)
{
int i, linelen;
/* ignore CR */
if (c == '\r')
return;
linelen = LCD_LINE_LENGTH;
if (heartbeat_active && curline == 0)
linelen--;
if (c == '\n') {
lcd_dis(LCD_LINE0, &lines[curline^1][0]);
lcd_dis(LCD_LINE1, &lines[curline][0]);
22 years ago
/* Do a line feed */
curline ^= 1;
22 years ago
linelen = LCD_LINE_LENGTH;
if (heartbeat_active && curline == 0)
linelen--;
linepos = 0;
22 years ago
for (i = 0; i < linelen; i++)
lines[curline][i] = ' ';
22 years ago
return;
22 years ago
}
/* Only allow to be output if there is room on the LCD line */
if (linepos < linelen)
lines[curline][linepos++] = c;
22 years ago
}
void
lcd_flush(void)
{
lcd_dis(LCD_LINE1, &lines[curline][0]);
}
void
lcd_write_string(const char *s)
{
char *p;
for (p = (char *)s; *p != '\0'; p++)
lcd_write_char(*p);
}
void
lcd_printf(const char *fmt, ...)
{
va_list args;
char buf[CFG_PBSIZE];
va_start(args, fmt);
(void)vsprintf(buf, fmt, args);
va_end(args);
lcd_write_string(buf);
}
void
lcd_heartbeat(void)
{
cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
#if 0
static char rotchars[] = { '|', '/', '-', '\\' };
#else
/* HD44780 Rom Code A00 has no backslash */
static char rotchars[] = { '|', '/', '-', '\315' };
#endif
static int rotator_index = 0;
heartbeat_active = 1;
/* write the address */
lcd_write_command(clp, LCD_CMD_ADD + LCD_LINE0 + (LCD_LINE_LENGTH - 1));
/* write the next char in the sequence */
lcd_write_data(clp, rotchars[rotator_index]);
if (++rotator_index >= (sizeof rotchars / sizeof rotchars[0]))
rotator_index = 0;
}
#ifdef CONFIG_SHOW_ACTIVITY
void board_show_activity (ulong timestamp)
{
#ifdef CONFIG_STATUS_LED
if ((timestamp % (CFG_HZ / 2) == 0)
lcd_heartbeat ();
#endif
}
void show_activity(int arg)
{
}
#endif