upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/esd/pci405/pci405.c

255 lines
6.4 KiB

22 years ago
/*
* (C) Copyright 2001
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <command.h>
#include <cmd_boot.h>
#include <malloc.h>
#include <pci.h>
#include <405gp_pci.h>
/* ------------------------------------------------------------------------- */
#if 0
#define FPGA_DEBUG
#endif
#define PCI_RECONFIG_MAGIC 0x07081967
struct pci_config_regs {
unsigned short command;
unsigned char latency_timer;
unsigned char int_line;
unsigned long bar1;
unsigned long bar2;
unsigned long magic;
};
/* fpga configuration data - generated by bin2cc */
const unsigned char fpgadata[] =
{
#include "fpgadata.c"
};
/*
* include common fpga code (for esd boards)
*/
#include "../common/fpga.c"
/* Prototypes */
int gunzip(void *, int, unsigned char *, int *);
int board_pre_init (void)
{
unsigned long cntrl0Reg;
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
* IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
* IRQ 27 (EXT IRQ 2) CAN2; active low; level sensitive
* IRQ 28 (EXT IRQ 3) CAN3; active low; level sensitive
* IRQ 29 (EXT IRQ 4) unused; active low; level sensitive
* IRQ 30 (EXT IRQ 5) FPGA Timestamp; active low; level sensitive
* IRQ 31 (EXT IRQ 6) PCI Reset; active low; level sensitive
*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
mtdcr(uictr, 0x10000000); /* set int trigger levels */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
/*
* Setup GPIO pins (IRQ4/GPIO21 as GPIO)
*/
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x00008000);
return 0;
}
/* ------------------------------------------------------------------------- */
int misc_init_f (void)
{
return 0; /* dummy implementation */
}
int misc_init_r (void)
{
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
int index;
int i;
struct pci_config_regs *pci_regs;
/*
* On PCI-405 the environment is saved in eeprom!
* FPGA can be gzip compressed (malloc) and booted this late.
*/
dst = malloc(CFG_FPGA_MAX_SIZE);
if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
status = fpga_boot(dst, len);
if (status != 0) {
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("FPGA: %s\n", &(dst[index+1]));
index += len+3;
}
putc ('\n');
/* delayed reboot */
for (i=20; i>0; i--) {
printf("Rebooting in %2d seconds \r",i);
for (index=0;index<1000;index++)
udelay(1000);
}
putc ('\n');
do_reset(NULL, 0, 0, NULL);
}
puts("FPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("%s ", &(dst[index+1]));
index += len+3;
}
putc ('\n');
/*
* Rewrite pci config regs (only after soft-reset with magic set)
*/
pci_regs = (struct pci_config_regs *)0x10;
if (pci_regs->magic == PCI_RECONFIG_MAGIC) {
puts("PCI: Found magic, rewriting config regs...\n");
pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND,
pci_regs->command);
pci_write_config_byte(PCIDEVID_405GP, PCI_LATENCY_TIMER,
pci_regs->latency_timer);
pci_write_config_byte(PCIDEVID_405GP, PCI_INTERRUPT_LINE,
pci_regs->int_line);
pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1,
pci_regs->bar1);
pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2,
pci_regs->bar2);
}
pci_regs->magic = 0; /* clear magic again */
#if 0 /* test-only */
pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &(pci_regs->command));
pci_read_config_byte(PCIDEVID_405GP, PCI_LATENCY_TIMER, &(pci_regs->latency_timer));
pci_read_config_byte(PCIDEVID_405GP, PCI_INTERRUPT_LINE, &(pci_regs->int_line));
pci_read_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, &(pci_regs->bar1));
pci_read_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, &(pci_regs->bar2));
pci_regs->magic = PCI_RECONFIG_MAGIC; /* set magic */
#endif
free(dst);
return (0);
}
/*
* Check Board Identity:
*/
int checkboard (void)
{
unsigned char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
puts ("Board: ");
if (i == -1) {
puts ("### No HW ID - assuming CPCI405");
} else {
puts (str);
}
putc ('\n');
return 0;
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
unsigned long val;
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
#if 0
printf("\nmb0cf=%x\n", val); /* test-only */
printf("strap=%x\n", mfdcr(strap)); /* test-only */
#endif
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
/* ------------------------------------------------------------------------- */
int testdram (void)
{
/* TODO: XXX XXX XXX */
printf ("test: 16 MB - ok\n");
return (0);
}
/* ------------------------------------------------------------------------- */