Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
9798 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: 8d1f268204
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '8d1f268204'
${ noResults }
u-boot/include/serial.h

88 lines
2.4 KiB
Raw Normal View History Unescape

* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
21 years ago
#ifndef __SERIAL_H__
#define __SERIAL_H__
#define NAMESIZE 16
#define CTLRSIZE 8
struct serial_device {
char name[NAMESIZE];
char ctlr[CTLRSIZE];
int (*init) (void);
void (*setbrg) (void);
int (*getc) (void);
int (*tstc) (void);
void (*putc) (const char c);
void (*puts) (const char *s);
struct serial_device *next;
};
extern struct serial_device serial_smc_device;
extern struct serial_device serial_scc_device;
extern struct serial_device * default_serial_console (void);
ppc4xx: Add PPC405EX support Signed-off-by: Stefan Roese <sr@denx.de>
17 years ago
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
8xxx: Second UART port added for MPC85xx, MPC83xx, MPC86xx processors Defining the next two configs allows to switch the serial port from the console using the setenv stdin and stdout 1. #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ 2. #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16 years ago
defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) || \
defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
20 years ago
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16 years ago
#if defined(CONFIG_SYS_NS16550_SERIAL)
Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled
19 years ago
extern struct serial_device eserial1_device;
extern struct serial_device eserial2_device;
extern struct serial_device eserial3_device;
extern struct serial_device eserial4_device;
rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16 years ago
#endif /* CONFIG_SYS_NS16550_SERIAL */
Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled
19 years ago
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
20 years ago
#endif
ARM: s3c24xx: Multiple serial port support This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's Signed-off-by: Harald Welte <laforge@openmoko.org>
17 years ago
#if defined(CONFIG_S3C2410)
extern struct serial_device s3c24xx_serial0_device;
extern struct serial_device s3c24xx_serial1_device;
extern struct serial_device s3c24xx_serial2_device;
#endif
* Patch by Leif Lindholm, 23 Sep 2004: add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
20 years ago
s5pc1xx: support serial driver This patch includes the serial driver for s5pc1xx. s5pc1xx uart driver needs own register setting and clock configuration. So, need to special driver. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
15 years ago
#if defined(CONFIG_S5PC1XX)
extern struct serial_device s5pc1xx_serial0_device;
extern struct serial_device s5pc1xx_serial1_device;
extern struct serial_device s5pc1xx_serial2_device;
extern struct serial_device s5pc1xx_serial3_device;
#endif
ZOOM2 Add serial support. Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board. The USB connector will produce 2 of the 4 UARTS. On your host pick the first enumeration. The details of the setting of the serial gpmc setup are not available. The values were provided by another party. The serial port set up is the same with Zoom1. Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow. The kernel bootargs are console=ttyS3,115200n8 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
16 years ago
#if defined(CONFIG_OMAP3_ZOOM2)
extern struct serial_device zoom2_serial_device0;
extern struct serial_device zoom2_serial_device1;
extern struct serial_device zoom2_serial_device2;
extern struct serial_device zoom2_serial_device3;
#endif
PXA270: Add support for multiple serial ports. This patch adds support for multiple serial ports to the PXA target. FFUART, BTUART and STUART are supported. Signed-off-by: Stefano Babic <sbabic@denx.de>
18 years ago
extern struct serial_device serial_ffuart_device;
extern struct serial_device serial_btuart_device;
extern struct serial_device serial_stuart_device;
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
21 years ago
extern void serial_initialize(void);
stdio/device: rework function naming convention So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
16 years ago
extern void serial_stdio_init(void);
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
21 years ago
extern int serial_assign(char * name);
extern void serial_reinit_all(void);
USBTTY make some function declarations easier to use. Zoom2 needs to use these declarations and the include directory is a better place from them than in the middle of the driver directory. It did not make sense to create a new file for just a couple of lines so they were appended to the serial.h Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
15 years ago
/* For usbtty */
OMAP3 zoom2 Use usbtty if the debug board is not connected. The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
15 years ago
#ifdef CONFIG_USB_TTY
USBTTY make some function declarations easier to use. Zoom2 needs to use these declarations and the include directory is a better place from them than in the middle of the driver directory. It did not make sense to create a new file for just a couple of lines so they were appended to the serial.h Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
15 years ago
extern int usbtty_getc(void);
extern void usbtty_putc(const char c);
extern void usbtty_puts(const char *str);
extern int usbtty_tstc(void);
OMAP3 zoom2 Use usbtty if the debug board is not connected. The preferred serial output comes from the debug board. When the debug board is disconnected, fall back on using usbtty from the usb connector on the Zoom2 board. This shows up as /dev/ttyACM0 in a linux host. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
15 years ago
#else
/* stubs */
#define usbtty_getc() 0
#define usbtty_putc(a)
#define usbtty_puts(a)
#define usbtty_tstc() 0
#endif /* CONFIG_USB_TTY */
* Code cleanup * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
21 years ago
#endif