Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
35633 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: 94985cc9d3
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '94985cc9d3'
${ noResults }
u-boot/board/solidrun/mx6cuboxi/README

22 lines
561 B
Raw Normal View History Unescape

mx6cuboxi: Mention Cubox-i in the README Cubox-i boards are also supported, so update the README file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
10 years ago
How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------
mx6: Add initial SPL support for HummingBoard-i2eX Add the initial SPL support for HummingBoard-i2eX, which is based on a MX6 Dual. For more information about HummingBoard, please check: http://www.solid-run.com/products/hummingboard/ Based on the work from Jon Nettleton and Rabeeh Khoury. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com>
10 years ago
mx6cuboxi: Mention Cubox-i in the README Cubox-i boards are also supported, so update the README file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
10 years ago
- Build U-boot for Hummingboard/Cubox-i:
mx6: Add initial SPL support for HummingBoard-i2eX Add the initial SPL support for HummingBoard-i2eX, which is based on a MX6 Dual. For more information about HummingBoard, please check: http://www.solid-run.com/products/hummingboard/ Based on the work from Jon Nettleton and Rabeeh Khoury. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com>
10 years ago
$ make mrproper
$ make mx6cuboxi_defconfig
$ make
This will generate the SPL image called SPL and the u-boot.img.
- Flash the SPL image into the SD card:
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
- Flash the u-boot.img image into the SD card:
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
mx6cuboxi: Mention Cubox-i in the README Cubox-i boards are also supported, so update the README file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
10 years ago
- Insert the SD card in the board, power it up and U-boot messages should
come up.