upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/cpu/mpc8220/cpu_init.c

137 lines
3.9 KiB

/*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8220.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers.
*/
void cpu_init_f (void)
{
volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
/* Clear all port configuration */
portcfg->pcfg0 = 0;
portcfg->pcfg1 = 0;
portcfg->pcfg2 = 0;
portcfg->pcfg3 = 0;
portcfg->pcfg2 = CFG_GP1_PORT2_CONFIG;
portcfg->pcfg3 = CFG_PCI_PORT3_CONFIG | CFG_GP2_PORT3_CONFIG;
/*
* Flexbus Controller: configure chip selects and enable them
*/
#if defined (CFG_CS0_BASE)
flexbus->csar0 = CFG_CS0_BASE;
/* Sorcery-C can hang-up after CTRL reg initialization */
#if defined (CFG_CS0_CTRL)
flexbus->cscr0 = CFG_CS0_CTRL;
#endif
flexbus->csmr0 = ((CFG_CS0_MASK - 1) & 0xffff0000) | 1;
__asm__ volatile ("sync");
#endif
#if defined (CFG_CS1_BASE)
flexbus->csar1 = CFG_CS1_BASE;
flexbus->cscr1 = CFG_CS1_CTRL;
flexbus->csmr1 = ((CFG_CS1_MASK - 1) & 0xffff0000) | 1;
__asm__ volatile ("sync");
#endif
#if defined (CFG_CS2_BASE)
flexbus->csar2 = CFG_CS2_BASE;
flexbus->cscr2 = CFG_CS2_CTRL;
flexbus->csmr2 = ((CFG_CS2_MASK - 1) & 0xffff0000) | 1;
portcfg->pcfg3 |= CFG_CS2_PORT3_CONFIG;
__asm__ volatile ("sync");
#endif
#if defined (CFG_CS3_BASE)
flexbus->csar3 = CFG_CS3_BASE;
flexbus->cscr3 = CFG_CS3_CTRL;
flexbus->csmr3 = ((CFG_CS3_MASK - 1) & 0xffff0000) | 1;
portcfg->pcfg3 |= CFG_CS3_PORT3_CONFIG;
__asm__ volatile ("sync");
#endif
#if defined (CFG_CS4_BASE)
flexbus->csar4 = CFG_CS4_BASE;
flexbus->cscr4 = CFG_CS4_CTRL;
flexbus->csmr4 = ((CFG_CS4_MASK - 1) & 0xffff0000) | 1;
portcfg->pcfg3 |= CFG_CS4_PORT3_CONFIG;
__asm__ volatile ("sync");
#endif
#if defined (CFG_CS5_BASE)
flexbus->csar5 = CFG_CS5_BASE;
flexbus->cscr5 = CFG_CS5_CTRL;
flexbus->csmr5 = ((CFG_CS5_MASK - 1) & 0xffff0000) | 1;
portcfg->pcfg3 |= CFG_CS5_PORT3_CONFIG;
__asm__ volatile ("sync");
#endif
/* This section of the code cannot place in cpu_init_r(),
it will cause the system to hang */
/* enable timebase */
xlbarb->addrTenTimeOut = 0x1000;
xlbarb->dataTenTimeOut = 0x1000;
xlbarb->busActTimeOut = 0x2000;
xlbarb->config = 0x00002000;
/* Master Priority Enable */
xlbarb->mastPriority = 0;
xlbarb->mastPriEn = 0xff;
}
/*
* initialize higher level parts of CPU like time base and timers
*/
int cpu_init_r (void)
{
/* this may belongs to disable interrupt section */
/* mask all interrupts */
*(vu_long *) 0xf0000700 = 0xfffffc00;
*(vu_long *) 0xf0000714 |= 0x0001ffff;
*(vu_long *) 0xf0000710 &= ~0x00000f00;
/* route critical ints to normal ints */
*(vu_long *) 0xf0000710 |= 0x00000001;
#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
/* load FEC microcode */
loadtask (0, 2);
#endif
return (0);
}