upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/drivers/dma/fsl_dma.c

93 lines
2.5 KiB

/*
* Copyright 2004,2007,2008 Freescale Semiconductor, Inc.
* (C) Copyright 2002, 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/fsl_dma.h>
#if defined(CONFIG_MPC85xx)
volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
#elif defined(CONFIG_MPC86xx)
volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR);
#else
#error "Freescale DMA engine not supported on your processor"
#endif
static void dma_sync(void)
{
#if defined(CONFIG_MPC85xx)
asm("sync; isync; msync");
#elif defined(CONFIG_MPC86xx)
asm("sync; isync");
#endif
}
static uint dma_check(void) {
volatile fsl_dma_t *dma = &dma_base->dma[0];
volatile uint status = dma->sr;
/* While the channel is busy, spin */
while (status & FSL_DMA_SR_CB)
status = dma->sr;
/* clear MR[CS] channel start bit */
dma->mr &= FSL_DMA_MR_CS;
dma_sync();
if (status != 0)
printf ("DMA Error: status = %x\n", status);
return status;
}
void dma_init(void) {
volatile fsl_dma_t *dma = &dma_base->dma[0];
dma->satr = FSL_DMA_SATR_SREAD_NO_SNOOP;
dma->datr = FSL_DMA_DATR_DWRITE_NO_SNOOP;
dma->sr = 0xffffffff; /* clear any errors */
dma_sync();
}
int dma_xfer(void *dest, uint count, void *src) {
volatile fsl_dma_t *dma = &dma_base->dma[0];
dma->dar = (uint) dest;
dma->sar = (uint) src;
dma->bcr = count;
/* Disable bandwidth control, use direct transfer mode */
dma->mr = FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT;
dma_sync();
/* Start the transfer */
dma->mr = FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_CS;
dma_sync();
return dma_check();
}