upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
192 lines
5.7 KiB
192 lines
5.7 KiB
14 years ago
|
/*
|
||
|
|
* Bluewater Systems Snapper 9260 and 9G20 modules
|
||
|
|
*
|
||
|
|
* (C) Copyright 2011 Bluewater Systems
|
||
|
|
* Author: Andre Renaud <andre@bluewatersys.com>
|
||
|
|
* Author: Ryan Mallon <ryan@bluewatersys.com>
|
||
|
|
*
|
||
|
|
* See file CREDITS for list of people who contributed to this
|
||
|
|
* project.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation; either version 2 of
|
||
|
|
* the License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License
|
||
|
|
* along with this program; if not, write to the Free Software
|
||
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
|
* MA 02111-1307 USA
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __CONFIG_H
|
||
|
|
#define __CONFIG_H
|
||
|
|
|
||
|
|
/* SoC type is defined in boards.cfg */
|
||
|
|
#include <asm/hardware.h>
|
||
|
|
#include <asm/sizes.h>
|
||
|
|
|
||
|
|
#define CONFIG_SYS_TEXT_BASE 0x20000000
|
||
|
|
|
||
|
|
/* ARM asynchronous clock */
|
||
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
|
||
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||
|
|
#define CONFIG_SYS_HZ 1000
|
||
|
|
|
||
|
|
/* CPU */
|
||
|
|
#define CONFIG_ARCH_CPU_INIT
|
||
|
|
#undef CONFIG_USE_IRQ
|
||
|
|
|
||
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
||
|
|
#define CONFIG_INITRD_TAG
|
||
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||
|
|
#define CONFIG_SKIP_RELOCATE_UBOOT
|
||
|
|
#define CONFIG_DISPLAY_CPUINFO
|
||
|
|
#define CONFIG_FIT
|
||
|
|
|
||
|
|
/* SDRAM */
|
||
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
||
|
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
||
|
|
#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* 64MB */
|
||
|
|
#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \
|
||
|
|
GENERATED_GBL_DATA_SIZE)
|
||
|
|
|
||
|
|
/* Mem test settings */
|
||
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + (1024 * 1024))
|
||
|
|
|
||
|
|
/* NAND Flash */
|
||
|
|
#define CONFIG_NAND_ATMEL
|
||
|
|
#define CONFIG_SYS_NO_FLASH
|
||
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||
|
|
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
||
|
|
#define CONFIG_SYS_NAND_DBW_8
|
||
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */
|
||
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */
|
||
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
||
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
|
||
|
|
|
||
|
|
/* Ethernet */
|
||
|
|
#define CONFIG_MACB
|
||
|
|
#define CONFIG_RMII
|
||
|
|
#define CONFIG_NET_MULTI
|
||
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
||
|
|
#define CONFIG_RESET_PHY_R
|
||
|
|
#define CONFIG_TFTP_PORT
|
||
|
|
#define CONFIG_TFTP_TSIZE
|
||
|
|
|
||
|
|
/* USB */
|
||
|
|
#define CONFIG_USB_ATMEL
|
||
|
|
#define CONFIG_USB_OHCI_NEW
|
||
|
|
#define CONFIG_DOS_PARTITION
|
||
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
||
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
|
||
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
||
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
||
|
|
#define CONFIG_USB_STORAGE
|
||
|
|
|
||
|
|
/* GPIOs and IO expander */
|
||
|
|
#define CONFIG_AT91_LEGACY
|
||
|
|
#define CONFIG_ATMEL_LEGACY
|
||
|
|
#define CONFIG_AT91_GPIO
|
||
|
|
#define CONFIG_AT91_GPIO_PULLUP 1
|
||
|
|
#define CONFIG_PCA953X
|
||
|
|
#define CONFIG_SYS_I2C_PCA953X_ADDR 0x28
|
||
|
|
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} }
|
||
|
|
|
||
|
|
/* UARTs/Serial console */
|
||
|
|
#define CONFIG_ATMEL_USART
|
||
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
||
|
|
#define CONFIG_BAUDRATE 115200
|
||
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
|
||
|
|
#define CONFIG_SYS_PROMPT "Snapper> "
|
||
|
|
|
||
|
|
/* I2C - Bit-bashed */
|
||
|
|
#define CONFIG_SOFT_I2C
|
||
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
||
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||
|
|
#define CONFIG_SOFT_I2C_READ_REPEATED_START
|
||
|
|
#define CONFIG_I2C_MULTI_BUS
|
||
|
|
#define I2C_INIT do { \
|
||
|
|
at91_set_gpio_output(AT91_PIN_PA23, 1); \
|
||
|
|
at91_set_gpio_output(AT91_PIN_PA24, 1); \
|
||
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \
|
||
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \
|
||
|
|
} while (0)
|
||
|
|
#define I2C_SOFT_DECLARATIONS
|
||
|
|
#define I2C_ACTIVE
|
||
|
|
#define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PA23, 1);
|
||
|
|
#define I2C_READ at91_get_gpio_value(AT91_PIN_PA23);
|
||
|
|
#define I2C_SDA(bit) do { \
|
||
|
|
if (bit) { \
|
||
|
|
at91_set_gpio_input(AT91_PIN_PA23, 1); \
|
||
|
|
} else { \
|
||
|
|
at91_set_gpio_output(AT91_PIN_PA23, 1); \
|
||
|
|
at91_set_gpio_value(AT91_PIN_PA23, bit); \
|
||
|
|
} \
|
||
|
|
} while (0)
|
||
|
|
#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
|
||
|
|
#define I2C_DELAY udelay(2)
|
||
|
|
|
||
|
|
/* Boot options */
|
||
|
|
#define CONFIG_SYS_LOAD_ADDR 0x23000000
|
||
|
|
#define CONFIG_BOOTDELAY 3
|
||
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
||
|
|
|
||
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
||
|
|
#define CONFIG_BOOTP_BOOTPATH
|
||
|
|
#define CONFIG_BOOTP_GATEWAY
|
||
|
|
#define CONFIG_BOOTP_HOSTNAME
|
||
|
|
|
||
|
|
/* Environment settings */
|
||
|
|
#define CONFIG_ENV_IS_IN_NAND
|
||
|
|
#define CONFIG_ENV_OFFSET (512 << 10)
|
||
|
|
#define CONFIG_ENV_SIZE (256 << 10)
|
||
|
|
#define CONFIG_ENV_OVERWRITE
|
||
|
|
#define CONFIG_BOOTARGS "console=ttyS0,115200 ip=any"
|
||
|
|
|
||
|
|
/* Console settings */
|
||
|
|
#define CONFIG_SYS_CBSIZE 256
|
||
|
|
#define CONFIG_SYS_MAXARGS 16
|
||
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||
|
|
#define CONFIG_SYS_LONGHELP
|
||
|
|
#define CONFIG_SYS_EXTBDINFO
|
||
|
|
#define CONFIG_CMDLINE_EDITING
|
||
|
|
#define CONFIG_AUTO_COMPLETE
|
||
|
|
#define CONFIG_SYS_HUSH_PARSER
|
||
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||
|
|
|
||
|
|
/* U-Boot memory settings */
|
||
|
|
#define CONFIG_SYS_MALLOC_LEN (1 << 20)
|
||
|
|
#define CONFIG_STACKSIZE (256 << 10)
|
||
|
|
|
||
|
|
/* Command line configuration */
|
||
|
|
#include <config_cmd_default.h>
|
||
|
|
#undef CONFIG_CMD_BDI
|
||
|
|
#undef CONFIG_CMD_FPGA
|
||
|
|
#undef CONFIG_CMD_IMI
|
||
|
|
#undef CONFIG_CMD_IMLS
|
||
|
|
#undef CONFIG_CMD_LOADS
|
||
|
|
#undef CONFIG_CMD_SOURCE
|
||
|
|
|
||
|
|
#define CONFIG_CMD_PING
|
||
|
|
#define CONFIG_CMD_DHCP
|
||
|
|
#define CONFIG_CMD_FAT
|
||
|
|
#define CONFIG_CMD_I2C
|
||
|
|
#undef CONFIG_CMD_GPIO
|
||
|
|
#define CONFIG_CMD_USB
|
||
|
|
#define CONFIG_CMD_MII
|
||
|
|
#define CONFIG_CMD_NAND
|
||
|
|
#define CONFIG_CMD_PCA953X
|
||
|
|
#define CONFIG_CMD_PCA953X_INFO
|
||
|
|
|
||
|
|
#endif /* __CONFIG_H */
|