upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/linkstation/linkstation.c

137 lines
3.5 KiB

/*
* linkstation.c
*
* Misc LinkStation specific functions
*
* Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <version.h>
#include <common.h>
#include <mpc824x.h>
#include <asm/io.h>
#include <ns16550.h>
#include <netdev.h>
#ifdef CONFIG_PCI
#include <pci.h>
#endif
extern void init_AVR_DUART(void);
int checkboard (void)
{
DECLARE_GLOBAL_DATA_PTR;
char *p;
bd_t *bd = gd->bd;
init_AVR_DUART();
if ((p = getenv ("console_nr")) != NULL) {
unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
bd->bi_baudrate &= ~3;
bd->bi_baudrate |= con_nr & 3;
}
return 0;
}
phys_size_t initdram (int board_type)
{
return (get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE));
}
/*
* Initialize PCI Devices
*/
#ifdef CONFIG_PCI
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_linkstation_config_table[] = {
/* vendor, device, class */
/* bus, dev, func */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x0b, 0, /* AN983B or RTL8110S */
/* ethernet controller */
pci_cfgfunc_config_device, { PCI_ETH_IOADDR,
PCI_ETH_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x0c, 0, /* SII680 or IT8211AF */
/* ide controller */
pci_cfgfunc_config_device, { PCI_IDE_IOADDR,
PCI_IDE_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */
pci_cfgfunc_config_device, { PCI_USB0_IOADDR,
PCI_USB0_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */
pci_cfgfunc_config_device, { PCI_USB1_IOADDR,
PCI_USB1_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */
pci_cfgfunc_config_device, { PCI_USB2_IOADDR,
PCI_USB2_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ }
};
#endif
struct pci_controller hose = {
#ifndef CONFIG_PCI_PNP
config_table:pci_linkstation_config_table,
#endif
};
void pci_init_board (void)
{
pci_mpc824x_init (&hose);
/* Reset USB 1.1 */
/* Haven't seen any change without these on a HG, maybe it is
* needed on other models */
out_le32((volatile unsigned*)(PCI_USB0_MEMADDR + 8), 1);
out_le32((volatile unsigned*)(PCI_USB1_MEMADDR + 8), 1);
}
#endif /* CONFIG_PCI */
#define UART_DCR 0x80004511
int board_early_init_f (void)
{
/* set DUART mode */
out_8((volatile u8*)UART_DCR, 1);
return 0;
}
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}