upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/cpu/arm926ejs/davinci/cpu.c

132 lines
3.3 KiB

/*
* Copyright (C) 2004 Texas Instruments.
* Copyright (C) 2009 David Brownell
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <common.h>
#include <asm/arch/hardware.h>
/* offsets from PLL controller base */
#define PLLC_PLLCTL 0x100
#define PLLC_PLLM 0x110
#define PLLC_PREDIV 0x114
#define PLLC_PLLDIV1 0x118
#define PLLC_PLLDIV2 0x11c
#define PLLC_PLLDIV3 0x120
#define PLLC_POSTDIV 0x128
#define PLLC_BPDIV 0x12c
#define PLLC_PLLDIV4 0x160
#define PLLC_PLLDIV5 0x164
#define PLLC_PLLDIV6 0x168
#define PLLC_PLLDIV8 0x170
#define PLLC_PLLDIV9 0x174
#define BIT(x) (1 << (x))
/* SOC-specific pll info */
#ifdef CONFIG_SOC_DM355
#define ARM_PLLDIV PLLC_PLLDIV1
#define DDR_PLLDIV PLLC_PLLDIV1
#endif
#ifdef CONFIG_SOC_DM644X
#define ARM_PLLDIV PLLC_PLLDIV2
#define DSP_PLLDIV PLLC_PLLDIV1
#define DDR_PLLDIV PLLC_PLLDIV2
#endif
#ifdef CONFIG_SOC_DM6447
#define ARM_PLLDIV PLLC_PLLDIV2
#define DSP_PLLDIV PLLC_PLLDIV1
#define DDR_PLLDIV PLLC_PLLDIV1
#endif
#ifdef CONFIG_DISPLAY_CPUINFO
static unsigned pll_div(volatile void *pllbase, unsigned offset)
{
u32 div;
div = REG(pllbase + offset);
return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
}
static inline unsigned pll_prediv(volatile void *pllbase)
{
#ifdef CONFIG_SOC_DM355
/* this register read seems to fail on pll0 */
if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
return 8;
else
return pll_div(pllbase, PLLC_PREDIV);
#endif
return 1;
}
static inline unsigned pll_postdiv(volatile void *pllbase)
{
#ifdef CONFIG_SOC_DM355
return pll_div(pllbase, PLLC_POSTDIV);
#elif defined(CONFIG_SOC_DM6446)
if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
return pll_div(pllbase, PLLC_POSTDIV);
#endif
return 1;
}
static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
{
volatile void *pllbase = (volatile void *) pll_addr;
unsigned base = CONFIG_SYS_HZ_CLOCK / 1000;
/* the PLL might be bypassed */
if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
base /= pll_prediv(pllbase);
base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
base /= pll_postdiv(pllbase);
}
return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
}
int print_cpuinfo(void)
{
/* REVISIT fetch and display CPU ID and revision information
* too ... that will matter as more revisions appear.
*/
printf("Cores: ARM %d MHz",
pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
#ifdef DSP_PLLDIV
printf(", DSP %d MHz",
pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
#endif
printf("\nDDR: %d MHz\n",
/* DDR PHY uses an x2 input clock */
pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
/ 2);
return 0;
}
#endif