upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
25 lines
813 B
25 lines
813 B
22 years ago
|
This document contains different information about the port
|
||
|
|
of U-Boot for the OXC board designed by Lucent Technologies,
|
||
|
|
Inc.
|
||
|
|
|
||
|
|
1. Showing activity
|
||
|
|
|
||
|
|
U-Boot for the OXC board can show its current status using
|
||
|
|
the Active LED. This feature is configured by the following
|
||
|
|
options:
|
||
|
|
|
||
|
|
CONFIG_SHOW_ACTIVITY
|
||
|
|
|
||
|
|
When this option is on, the Active LED is blinking fast
|
||
|
|
when U-Boot runs in the idle loop (i.e. waits for user
|
||
|
|
commands from serial console) and blinking slow when it
|
||
|
|
downloads an image over network. When U-Boot loads an image
|
||
|
|
over serial line the Active LED does not blink and its state
|
||
|
|
is random (i.e. either constant on or constant off).
|
||
|
|
|
||
|
|
CONFIG_SHOW_BOOT_PROGRESS
|
||
|
|
|
||
|
|
When this option is on, U-Boot switches the Active LED
|
||
|
|
off before booting an image and switches it on if booting
|
||
|
|
failed due to some reasons.
|