u-boot/board/keymile/scripts/develop-common.txt

altbootcmd=run ${subbootcmds}
bootcmd=run ${subbootcmds}
configure=run set_uimage; km_setboardid && saveenv && reset
subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}
tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
toolchain=/opt/eldk
rootfssize=0
set_uimage=printenv uimage || setenv uimage uImage
km/common: simplify debug environment The debug environment which is stored in textfiles in the scripts directory was reworked. Two usecase are now present which can be executed simply from the default environment: run develop: this configures the environment to setup the rootfs via nfs run ramfs: this configures the environment to setup the rootfs in ram Each architecture now has a "arch" variable which is used to load the architecture specific debug scripts and to set the rootpath for NFS. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> 14 years ago			`altbootcmd=run ${subbootcmds}`
			`bootcmd=run ${subbootcmds}`
km/scripts: replace hardcoded uImage Replace uImage with ${uimage}. If uimage is not set, default it to uImage. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> 12 years ago			`configure=run set_uimage; km_setboardid && saveenv && reset`
km/common: simplify debug environment The debug environment which is stored in textfiles in the scripts directory was reworked. Two usecase are now present which can be executed simply from the default environment: run develop: this configures the environment to setup the rootfs via nfs run ramfs: this configures the environment to setup the rootfs in ram Each architecture now has a "arch" variable which is used to load the architecture specific debug scripts and to set the rootpath for NFS. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> 14 years ago			`subbootcmds=tftpfdt tftpkernel nfsargs add_default boot`
km/common: add toolchain variable Add a variable "toolchain" and configure the rootpath for the nfsargs with this variable. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de> 13 years ago			`nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}`
km/scripts: replace hardcoded uImage Replace uImage with ${uimage}. If uimage is not set, default it to uImage. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> 12 years ago			`tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}`
km/common: add toolchain variable Add a variable "toolchain" and configure the rootpath for the nfsargs with this variable. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de> 13 years ago			`toolchain=/opt/eldk`
km/common: fix ramfs development target Calucations of PRAM needs to take into account the 'rootfssize'. Memory available to the linux kernel 'mem=' is in all cases set to the total memory size minus the pram size. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de> 13 years ago			`rootfssize=0`
km/scripts: replace hardcoded uImage Replace uImage with ${uimage}. If uimage is not set, default it to uImage. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> 12 years ago			`set_uimage=printenv uimage \|\| setenv uimage uImage`