upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/arm/dts/kirkwood-pogo_e02.dts

133 lines
2.3 KiB

// SPDX-License-Identifier: GPL-2.0
/*
* kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
*
* Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
*
* based on information of dts files from
* Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
* OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
*
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Cloud Engines Pogoplug E02";
compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
"marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
gpio-leds {
compatible = "gpio-leds";
health {
label = "pogo_e02:green:health";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
fault {
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
&pinctrl {
pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
&pmx_led_green >;
pinctrl-names = "default";
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_green: pmx-led-green {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_led_orange: pmx-led-orange {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
};
&uart0 {
status = "okay";
};
&nand {
chip-delay = <40>;
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "pogoplug";
reg = <0x0500000 0x2000000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0x5b00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};