u-boot/arch/arm/mach-snapdragon/Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>

obj-$(CONFIG_TARGET_DRAGONBOARD820C) += clock-apq8096.o
obj-$(CONFIG_TARGET_DRAGONBOARD820C) += sysmap-apq8096.o
obj-$(CONFIG_TARGET_DRAGONBOARD410C) += clock-apq8016.o
obj-$(CONFIG_TARGET_DRAGONBOARD410C) += sysmap-apq8016.o
obj-$(CONFIG_TARGET_DRAGONBOARD410C) += pinctrl-apq8016.o
obj-$(CONFIG_TARGET_DRAGONBOARD410C) += pinctrl-snapdragon.o
obj-y += misc.o
obj-y += clock-snapdragon.o
obj-y += dram.o
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 7 years ago			`# SPDX-License-Identifier: GPL-2.0+`
arm: Add support for Qualcomm Snapdragon family First supported chip is APQ8016 (that is compatible with MSM8916). Drivers in SoC code: - Reset controller (PSHOLD) - Clock controller (very simple clock configuration for MMC and UART) Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> 9 years ago			`#`
			`# (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>`

db820c: add qualcomm dragonboard 820C support This commit adds support for 96Boards Dragonboard820C. The board is based on APQ8086 Qualcomm Soc, complying with the 96Boards specification. Features - 4x Kyro CPU (64 bit) up to 2.15GHz - USB2.0 - USB3.0 - ISP - Qualcomm Hexagon DSP - SD 3.0 (UHS-I) - UFS 2.0 - Qualcomm Adreno 530 GPU - GPS - BT 4.2 - Wi-Fi 2.4GHz, 5GHz (802.11ac) - PCIe 2.0 - MIPI-CSI, MIPI-DSI - I2S U-Boot boots chained from LK (LK implements the fastboot protocol) in 64-bit mode. For detailed build instructions see readme.txt in the board directory. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> 7 years ago			`obj-$(CONFIG_TARGET_DRAGONBOARD820C) += clock-apq8096.o`
			`obj-$(CONFIG_TARGET_DRAGONBOARD820C) += sysmap-apq8096.o`
arm: mach-snapdragon: refactor clock driver In preparation to add support for the Dragonboard820c (APQ8096), refactor the current Snapdragon clock driver. No new functionality has been added. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> 7 years ago			`obj-$(CONFIG_TARGET_DRAGONBOARD410C) += clock-apq8016.o`
			`obj-$(CONFIG_TARGET_DRAGONBOARD410C) += sysmap-apq8016.o`
mach-snapdragon: Introduce pinctrl driver This patch adds pinmux and pinctrl driver for TLMM subsystem in snapdragon chipsets. Currently, supporting only 8016, but implementation is generic and 8096 can be added easily. Driver is using the generic dt-bindings and doesn't introduce any new bindings (yet). Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 7 years ago			`obj-$(CONFIG_TARGET_DRAGONBOARD410C) += pinctrl-apq8016.o`
			`obj-$(CONFIG_TARGET_DRAGONBOARD410C) += pinctrl-snapdragon.o`
snapdragon: added msm_board_serial() func This commit adds a function to get the board serial number. In snapdragon it's actually the eMMC serial number. Function added in a new file misc.c that will include further snapdragon miscellaneous functions. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> 6 years ago			`obj-y += misc.o`
arm: mach-snapdragon: refactor clock driver In preparation to add support for the Dragonboard820c (APQ8096), refactor the current Snapdragon clock driver. No new functionality has been added. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> 7 years ago			`obj-y += clock-snapdragon.o`
snapdragon: Add DRAM detection & FDT fixup Fixup the Linux FDT with the detection of onboard DRAM as provided by SBL (Secondary boot loader) by reading the shared-memory region. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> 6 years ago			`obj-y += dram.o`