powerpc/t1024qds: Add T1024 QDS board support
T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.
T1024QDS board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
- Two 10M/100M/1G RGMII ports on-board
- Three 1G/2.5Gbps SGMII ports
- Four 1Gbps QSGMII ports
- one 10Gbps XFI or 10Base-KR interface
- SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
- PCIe: Three PCI Express controllers with five PCIe slots.
- IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- Video: DIU supports video up to 1280x1024x32 bpp.
- Chrontel CH7201 for HDMI connection.
- TI DS90C387R for direct LCD connection.
- Raw (not encoded) video connector for testing or other encoders.
- QUICC Engine block
- 32-bit RISC controller for flexible support of the communications peripherals
- Serial DMA channel for receive and transmit on all serial channels
- Two universal communication controllers, supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- eSPI: Three SPI flash devices.
- SATA: one SATA 2.O.
- USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
- I2C: Four I2C controllers.
- UART: Two UART on board.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
10 years ago
|
|
|
CONFIG_PPC=y
|
|
|
|
|
CONFIG_SYS_TEXT_BASE=0xEFF40000
|
|
|
|
|
CONFIG_SECURE_BOOT=y
|
powerpc/t1024qds: Add T1024 QDS board support
T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.
T1024QDS board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
- Two 10M/100M/1G RGMII ports on-board
- Three 1G/2.5Gbps SGMII ports
- Four 1Gbps QSGMII ports
- one 10Gbps XFI or 10Base-KR interface
- SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
- PCIe: Three PCI Express controllers with five PCIe slots.
- IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- Video: DIU supports video up to 1280x1024x32 bpp.
- Chrontel CH7201 for HDMI connection.
- TI DS90C387R for direct LCD connection.
- Raw (not encoded) video connector for testing or other encoders.
- QUICC Engine block
- 32-bit RISC controller for flexible support of the communications peripherals
- Serial DMA channel for receive and transmit on all serial channels
- Two universal communication controllers, supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- eSPI: Three SPI flash devices.
- SATA: one SATA 2.O.
- USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
- I2C: Four I2C controllers.
- UART: Two UART on board.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
10 years ago
|
|
|
CONFIG_MPC85xx=y
|
|
|
|
|
CONFIG_TARGET_T1024QDS=y
|
|
|
|
|
# CONFIG_SYS_MALLOC_F is not set
|
|
|
|
|
CONFIG_FIT=y
|
|
|
|
|
CONFIG_FIT_VERBOSE=y
|
|
|
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
|
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
|
|
|
CONFIG_BOOTDELAY=10
|
|
|
|
|
CONFIG_SILENT_CONSOLE=y
|
|
|
|
|
# CONFIG_CONSOLE_MUX is not set
|
|
|
|
|
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
|
|
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
|
|
|
CONFIG_BOARD_EARLY_INIT_R=y
|
|
|
|
|
CONFIG_HUSH_PARSER=y
|
|
|
|
|
CONFIG_CMD_IMLS=y
|
|
|
|
|
CONFIG_CMD_GREPENV=y
|
|
|
|
|
CONFIG_CMD_I2C=y
|
|
|
|
|
CONFIG_CMD_MMC=y
|
|
|
|
|
CONFIG_CMD_SF=y
|
|
|
|
|
CONFIG_CMD_USB=y
|
|
|
|
|
CONFIG_CMD_DHCP=y
|
|
|
|
|
CONFIG_CMD_MII=y
|
|
|
|
|
CONFIG_CMD_PING=y
|
|
|
|
|
CONFIG_CMD_BMP=y
|
|
|
|
|
CONFIG_CMD_DATE=y
|
|
|
|
|
CONFIG_MP=y
|
|
|
|
|
CONFIG_CMD_EXT2=y
|
|
|
|
|
CONFIG_CMD_FAT=y
|
|
|
|
|
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
|
|
|
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
|
|
|
|
|
CONFIG_DM=y
|
|
|
|
|
CONFIG_SYS_FSL_DDR3=y
|
|
|
|
|
CONFIG_FSL_ESDHC=y
|
|
|
|
|
CONFIG_MTD_PARTITIONS=y
|
|
|
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
|
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
|
|
|
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
|
|
|
|
CONFIG_FLASH_CFI_MTD=y
|
|
|
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
|
|
|
CONFIG_SPI_FLASH=y
|
|
|
|
|
CONFIG_SPI_FLASH_EON=y
|
|
|
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
|
|
|
CONFIG_SPI_FLASH_SST=y
|
|
|
|
|
CONFIG_PHYLIB=y
|
|
|
|
|
CONFIG_PHY_GIGE=y
|
|
|
|
|
CONFIG_E1000=y
|
|
|
|
|
CONFIG_MII=y
|
|
|
|
|
CONFIG_SYS_NS16550=y
|
|
|
|
|
CONFIG_SPI=y
|
|
|
|
|
CONFIG_FSL_ESPI=y
|
|
|
|
|
CONFIG_USB=y
|
|
|
|
|
CONFIG_USB_STORAGE=y
|
|
|
|
|
CONFIG_VIDEO=y
|
|
|
|
|
CONFIG_RSA=y
|
|
|
|
|
CONFIG_SPL_RSA=y
|
|
|
|
|
CONFIG_RSA_SOFTWARE_EXP=y
|
|
|
|
|
CONFIG_OF_LIBFDT=y
|
