Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
53086 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: b85f4fe70c
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'b85f4fe70c'
${ noResults }
u-boot/configs/stm32f746-disco_defconfig

67 lines
1.6 KiB
Raw Normal View History Unescape

stm32: add support for stm32f7 & stm32f746 discovery board This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
8 years ago
CONFIG_ARM=y
CONFIG_STM32=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_SYS_TEXT_BASE=0x08008000
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
7 years ago
CONFIG_SYS_MALLOC_F_LEN=0xC00
stm32: add support for stm32f7 & stm32f746 discovery board This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
8 years ago
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_ENV_VARS_UBOOT_CONFIG=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_NR_DRAM_BANKS=1
common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
8 years ago
CONFIG_BOOTDELAY=3
common: Move CONFIG_BOOTARGS to Kconfig Also introduce CONFIG_USE_BOOTARGS option so we can control if CONFIG_BOOTARGS defined at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Resync r8a779[56]_ulcb, various ls10xx targets] Signed-off-by: Tom Rini <trini@konsulko.com>
7 years ago
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
common/Kconfig: Add DISPLAY_CPUINFO Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
8 years ago
# CONFIG_DISPLAY_CPUINFO is not set
common: Add DISPLAY_BOARDINFO Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
8 years ago
# CONFIG_DISPLAY_BOARDINFO is not set
Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
7 years ago
CONFIG_BOARD_EARLY_INIT_F=y
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
8 years ago
CONFIG_HUSH_PARSER=y
stm32: add support for stm32f7 & stm32f746 discovery board This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
8 years ago
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_AUTOBOOT_STOP_STR=" "
configs: stm32f746-disco: enable MMC related flags STM32F469-disco embeds an arm_pl180 mmc IP, so enable CMD_MMC, DM_MMC and ARM_PL180_MMCI flags. Also enables all filesystem command related flags : _ CMD_EXT2 _ CMD_EXT4 _ CMD_FAT _ CMD_FS_GENERIC _ CMD_GPT _ CMD_BOOTZ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
7 years ago
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
# CONFIG_RANDOM_UUID is not set
CONFIG_CMD_MMC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
7 years ago
CONFIG_CMD_SF=y
stm32: add support for stm32f7 & stm32f746 discovery board This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
8 years ago
# CONFIG_CMD_SETEXPR is not set
net: stm32: add designware mac glue code for stm32 This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
7 years ago
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DNS=y
CONFIG_CMD_LINK_LOCAL=y
board: Add display to STM32F746 SoC discovery board Signed-off-by: yannick fertre <yannick.fertre@st.com>
6 years ago
CONFIG_CMD_BMP=y
configs: stm32f746-disco: Migrate CONFIG_CMD_CACHE to defconfig Remove CONFIG_CMD_CACHE from include/configs/stm32f746-disco.h and enable it in stm32f746-disco_defconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years ago
CONFIG_CMD_CACHE=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
8 years ago
CONFIG_CMD_TIMER=y
configs: stm32f746-disco: enable MMC related flags STM32F469-disco embeds an arm_pl180 mmc IP, so enable CMD_MMC, DM_MMC and ARM_PL180_MMCI flags. Also enables all filesystem command related flags : _ CMD_EXT2 _ CMD_EXT4 _ CMD_FAT _ CMD_FS_GENERIC _ CMD_GPT _ CMD_BOOTZ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
7 years ago
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
configs: stm32: Enable DOS_PARTITION for STM32F4/F7 boards Enable DOS_PARTITION for boards STM32F429-eval, STM32F469-disco and STM32F746-disco. This allows to read FAT partition on mmc. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years ago
# CONFIG_SPL_DOS_PARTITION is not set
configs: stm32f746-disco: enable MMC related flags STM32F469-disco embeds an arm_pl180 mmc IP, so enable CMD_MMC, DM_MMC and ARM_PL180_MMCI flags. Also enables all filesystem command related flags : _ CMD_EXT2 _ CMD_EXT4 _ CMD_FAT _ CMD_FS_GENERIC _ CMD_GPT _ CMD_BOOTZ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
7 years ago
# CONFIG_SPL_EFI_PARTITION is not set
net: stm32: add designware mac glue code for stm32 This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
7 years ago
CONFIG_OF_CONTROL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_DEFAULT_DEVICE_TREE="stm32f746-disco"
net: stm32: add designware mac glue code for stm32 This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
7 years ago
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
configs: stm32f746-disco: enable MMC related flags STM32F469-disco embeds an arm_pl180 mmc IP, so enable CMD_MMC, DM_MMC and ARM_PL180_MMCI flags. Also enables all filesystem command related flags : _ CMD_EXT2 _ CMD_EXT4 _ CMD_FAT _ CMD_FS_GENERIC _ CMD_GPT _ CMD_BOOTZ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
7 years ago
CONFIG_DM_MMC=y
# CONFIG_SPL_DM_MMC is not set
CONFIG_ARM_PL180_MMCI=y
ARM: SPI: stm32: add stm32f746 qspi driver This patch adds support for the QSPI IP found in stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
7 years ago
CONFIG_MTD=y
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years ago
CONFIG_MTD_NOR_FLASH=y
ARM: SPI: stm32: add stm32f746 qspi driver This patch adds support for the QSPI IP found in stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
7 years ago
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
net: stm32: add designware mac glue code for stm32 This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
7 years ago
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
6 years ago
CONFIG_MII=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
7 years ago
# CONFIG_PINCTRL_FULL is not set
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
6 years ago
CONFIG_SPI=y
ARM: SPI: stm32: add stm32f746 qspi driver This patch adds support for the QSPI IP found in stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
7 years ago
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
board: Add display to STM32F746 SoC discovery board Signed-off-by: yannick fertre <yannick.fertre@st.com>
6 years ago
CONFIG_DM_VIDEO=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_VIDEO_STM32=y
CONFIG_VIDEO_STM32_MAX_XRES=480
CONFIG_VIDEO_STM32_MAX_YRES=640
net: stm32: add designware mac glue code for stm32 This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
7 years ago
CONFIG_OF_LIBFDT_OVERLAY=y
kconfig: Move CONFIG_OF_LIBFDT to Kconfig This patch follows work done by: "Move CONFIG_OF_LIBFDT to Kconfig" (sha1: 69e173eb57d1f4848f070c83456096ba5d2ba1b4) Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Add xpress* to the patch] Signed-off-by: Tom Rini <trini@konsulko.com>
8 years ago
# CONFIG_EFI_LOADER is not set