upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/include/part.h

449 lines
14 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
23 years ago
/*
* (C) Copyright 2000-2004
23 years ago
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#ifndef _PART_H
#define _PART_H
#include <blk.h>
#include <ide.h>
#include <uuid.h>
#include <linux/list.h>
23 years ago
struct block_drvr {
char *name;
int (*select_hwpart)(int dev_num, int hwpart);
};
#define LOG2(x) (((x & 0xaaaaaaaa) ? 1 : 0) + ((x & 0xcccccccc) ? 2 : 0) + \
((x & 0xf0f0f0f0) ? 4 : 0) + ((x & 0xff00ff00) ? 8 : 0) + \
((x & 0xffff0000) ? 16 : 0))
#define LOG2_INVALID(type) ((type)((sizeof(type)<<3)-1))
23 years ago
/* Part types */
#define PART_TYPE_UNKNOWN 0x00
23 years ago
#define PART_TYPE_MAC 0x01
#define PART_TYPE_DOS 0x02
#define PART_TYPE_ISO 0x03
#define PART_TYPE_AMIGA 0x04
#define PART_TYPE_EFI 0x05
/* maximum number of partition entries supported by search */
#define DOS_ENTRY_NUMBERS 8
#define ISO_ENTRY_NUMBERS 64
#define MAC_ENTRY_NUMBERS 64
#define AMIGA_ENTRY_NUMBERS 8
/*
* Type string for U-Boot bootable partitions
*/
#define BOOT_PART_TYPE "U-Boot" /* primary boot partition type */
#define BOOT_PART_COMP "PPCBoot" /* PPCBoot compatibility type */
23 years ago
/* device types */
#define DEV_TYPE_UNKNOWN 0xff /* not connected */
#define DEV_TYPE_HARDDISK 0x00 /* harddisk */
#define DEV_TYPE_TAPE 0x01 /* Tape */
#define DEV_TYPE_CDROM 0x05 /* CD-ROM */
#define DEV_TYPE_OPDISK 0x07 /* optical disk */
23 years ago
#define PART_NAME_LEN 32
#define PART_TYPE_LEN 32
#define MAX_SEARCH_PARTITIONS 64
typedef struct disk_partition {
lbaint_t start; /* # of first block in partition */
lbaint_t size; /* number of blocks in partition */
23 years ago
ulong blksz; /* block size in bytes */
uchar name[PART_NAME_LEN]; /* partition name */
uchar type[PART_TYPE_LEN]; /* string type description */
int bootable; /* Active/Bootable flag is set */
#if CONFIG_IS_ENABLED(PARTITION_UUIDS)
char uuid[UUID_STR_LEN + 1]; /* filesystem UUID as string, if exists */
#endif
#ifdef CONFIG_PARTITION_TYPE_GUID
char type_guid[UUID_STR_LEN + 1]; /* type GUID as string, if exists */
#endif
#ifdef CONFIG_DOS_PARTITION
uchar sys_ind; /* partition type */
#endif
23 years ago
} disk_partition_t;
struct disk_part {
int partnum;
disk_partition_t gpt_part_info;
struct list_head list;
};
/* Misc _get_dev functions */
#ifdef CONFIG_PARTITIONS
/**
* blk_get_dev() - get a pointer to a block device given its type and number
*
* Each interface allocates its own devices and typically struct blk_desc is
* contained with the interface's data structure. There is no global
* numbering for block devices, so the interface name must be provided.
*
* @ifname: Interface name (e.g. "ide", "scsi")
* @dev: Device number (0 for first device on that interface, 1 for
* second, etc.
* @return pointer to the block device, or NULL if not available, or an
* error occurred.
*/
struct blk_desc *blk_get_dev(const char *ifname, int dev);
struct blk_desc *mg_disk_get_dev(int dev);
int host_get_dev_err(int dev, struct blk_desc **blk_devp);
23 years ago
/* disk/part.c */
int part_get_info(struct blk_desc *dev_desc, int part, disk_partition_t *info);
/**
* part_get_info_whole_disk() - get partition info for the special case of
* a partition occupying the entire disk.
*/
int part_get_info_whole_disk(struct blk_desc *dev_desc, disk_partition_t *info);
void part_print(struct blk_desc *dev_desc);
void part_init(struct blk_desc *dev_desc);
void dev_print(struct blk_desc *dev_desc);
/**
* blk_get_device_by_str() - Get a block device given its interface/hw partition
*
* Each interface allocates its own devices and typically struct blk_desc is
* contained with the interface's data structure. There is no global
* numbering for block devices, so the interface name must be provided.
*
* The hardware parition is not related to the normal software partitioning
* of a device - each hardware partition is effectively a separately
* accessible block device. When a hardware parition is selected on MMC the
* other hardware partitions become inaccessible. The same block device is
* used to access all hardware partitions, but its capacity may change when a
* different hardware partition is selected.
*
* When a hardware partition number is given, the block device switches to
* that hardware partition.
*
* @ifname: Interface name (e.g. "ide", "scsi")
* @dev_str: Device and optional hw partition. This can either be a string
* containing the device number (e.g. "2") or the device number
* and hardware partition number (e.g. "2.4") for devices that
* support it (currently only MMC).
* @dev_desc: Returns a pointer to the block device on success
* @return block device number (local to the interface), or -1 on error
*/
int blk_get_device_by_str(const char *ifname, const char *dev_str,
struct blk_desc **dev_desc);
/**
* blk_get_device_part_str() - Get a block device and partition
*
* This calls blk_get_device_by_str() to look up a device. It also looks up
* a partition and returns information about it.
*
* @dev_part_str is in the format:
* <dev>.<hw_part>:<part> where <dev> is the device number,
* <hw_part> is the optional hardware partition number and
* <part> is the partition number
*
* If ifname is "hostfs" then this function returns the sandbox host block
* device.
*
* If ifname is ubi, then this function returns 0, with @info set to a
* special UBI device.
*
* If @dev_part_str is NULL or empty or "-", then this function looks up
* the "bootdevice" environment variable and uses that string instead.
*
* If the partition string is empty then the first partition is used. If the
* partition string is "auto" then the first bootable partition is used.
*
* @ifname: Interface name (e.g. "ide", "scsi")
* @dev_part_str: Device and partition string
* @dev_desc: Returns a pointer to the block device on success
* @info: Returns partition information
* @allow_whole_dev: true to allow the user to select partition 0
* (which means the whole device), false to require a valid
* partition number >= 1
* @return partition number, or -1 on error
*
*/
int blk_get_device_part_str(const char *ifname, const char *dev_part_str,
struct blk_desc **dev_desc,
disk_partition_t *info, int allow_whole_dev);
/**
* part_get_info_by_name_type() - Search for a partition by name
* for only specified partition type
*
* @param dev_desc - block device descriptor
* @param gpt_name - the specified table entry name
* @param info - returns the disk partition info
* @param part_type - only search in partitions of this type
*
* @return - the partition number on match (starting on 1), -1 on no match,
* otherwise error
*/
int part_get_info_by_name_type(struct blk_desc *dev_desc, const char *name,
disk_partition_t *info, int part_type);
/**
* part_get_info_by_name() - Search for a partition by name
* among all available registered partitions
*
* @param dev_desc - block device descriptor
* @param gpt_name - the specified table entry name
* @param info - returns the disk partition info
*
* @return - the partition number on match (starting on 1), -1 on no match,
* otherwise error
*/
int part_get_info_by_name(struct blk_desc *dev_desc,
const char *name, disk_partition_t *info);
/**
* part_set_generic_name() - create generic partition like hda1 or sdb2
*
* Helper function for partition tables, which don't hold partition names
* (DOS, ISO). Generates partition name out of the device type and partition
* number.
*
* @dev_desc: pointer to the block device
* @part_num: partition number for which the name is generated
* @name: buffer where the name is written
*/
void part_set_generic_name(const struct blk_desc *dev_desc,
int part_num, char *name);
extern const struct block_drvr block_drvr[];
#else
static inline struct blk_desc *blk_get_dev(const char *ifname, int dev)
{ return NULL; }
static inline struct blk_desc *mg_disk_get_dev(int dev) { return NULL; }
23 years ago
static inline int part_get_info(struct blk_desc *dev_desc, int part,
disk_partition_t *info) { return -1; }
static inline int part_get_info_whole_disk(struct blk_desc *dev_desc,
disk_partition_t *info)
{ return -1; }
static inline void part_print(struct blk_desc *dev_desc) {}
static inline void part_init(struct blk_desc *dev_desc) {}
static inline void dev_print(struct blk_desc *dev_desc) {}
static inline int blk_get_device_by_str(const char *ifname, const char *dev_str,
struct blk_desc **dev_desc)
{ return -1; }
static inline int blk_get_device_part_str(const char *ifname,
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years ago
const char *dev_part_str,
struct blk_desc **dev_desc,
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years ago
disk_partition_t *info,
int allow_whole_dev)
{ *dev_desc = NULL; return -1; }
#endif
23 years ago
/*
* We don't support printing partition information in SPL and only support
* getting partition information in a few cases.
*/
#ifdef CONFIG_SPL_BUILD
# define part_print_ptr(x) NULL
# if defined(CONFIG_SPL_EXT_SUPPORT) || defined(CONFIG_SPL_FAT_SUPPORT) || \
defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION)
# define part_get_info_ptr(x) x
# else
# define part_get_info_ptr(x) NULL
# endif
#else
#define part_print_ptr(x) x
#define part_get_info_ptr(x) x
23 years ago
#endif
struct part_driver {
const char *name;
int part_type;
const int max_entries; /* maximum number of entries to search */
23 years ago
/**
* get_info() - Get information about a partition
*
* @dev_desc: Block device descriptor
* @part: Partition number (1 = first)
* @info: Returns partition information
*/
int (*get_info)(struct blk_desc *dev_desc, int part,
disk_partition_t *info);
/**
* print() - Print partition information
*
* @dev_desc: Block device descriptor
*/
void (*print)(struct blk_desc *dev_desc);
/**
* test() - Test if a device contains this partition type
*
* @dev_desc: Block device descriptor
* @return 0 if the block device appears to contain this partition
* type, -ve if not
*/
int (*test)(struct blk_desc *dev_desc);
};
/* Declare a new U-Boot partition 'driver' */
#define U_BOOT_PART_TYPE(__name) \
ll_entry_declare(struct part_driver, __name, part_driver)
#include <part_efi.h>
#if CONFIG_IS_ENABLED(EFI_PARTITION)
/* disk/part_efi.c */
/**
* write_gpt_table() - Write the GUID Partition Table to disk
*
* @param dev_desc - block device descriptor
* @param gpt_h - pointer to GPT header representation
* @param gpt_e - pointer to GPT partition table entries
*
* @return - zero on success, otherwise error
*/
int write_gpt_table(struct blk_desc *dev_desc,
gpt_header *gpt_h, gpt_entry *gpt_e);
/**
* gpt_fill_pte(): Fill the GPT partition table entry
*
* @param dev_desc - block device descriptor
* @param gpt_h - GPT header representation
* @param gpt_e - GPT partition table entries
* @param partitions - list of partitions
* @param parts - number of partitions
*
* @return zero on success
*/
int gpt_fill_pte(struct blk_desc *dev_desc,
gpt_header *gpt_h, gpt_entry *gpt_e,
disk_partition_t *partitions, int parts);
/**
* gpt_fill_header(): Fill the GPT header
*
* @param dev_desc - block device descriptor
* @param gpt_h - GPT header representation
* @param str_guid - disk guid string representation
* @param parts_count - number of partitions
*
* @return - error on str_guid conversion error
*/
int gpt_fill_header(struct blk_desc *dev_desc, gpt_header *gpt_h,
char *str_guid, int parts_count);
/**
* gpt_restore(): Restore GPT partition table
*
* @param dev_desc - block device descriptor
* @param str_disk_guid - disk GUID
* @param partitions - list of partitions
* @param parts - number of partitions
*
* @return zero on success
*/
int gpt_restore(struct blk_desc *dev_desc, char *str_disk_guid,
disk_partition_t *partitions, const int parts_count);
/**
* is_valid_gpt_buf() - Ensure that the Primary GPT information is valid
*
* @param dev_desc - block device descriptor
* @param buf - buffer which contains the MBR and Primary GPT info
*
* @return - '0' on success, otherwise error
*/
int is_valid_gpt_buf(struct blk_desc *dev_desc, void *buf);
/**
* write_mbr_and_gpt_partitions() - write MBR, Primary GPT and Backup GPT
*
* @param dev_desc - block device descriptor
* @param buf - buffer which contains the MBR and Primary GPT info
*
* @return - '0' on success, otherwise error
*/
int write_mbr_and_gpt_partitions(struct blk_desc *dev_desc, void *buf);
/**
* gpt_verify_headers() - Function to read and CRC32 check of the GPT's header
* and partition table entries (PTE)
*
* As a side effect if sets gpt_head and gpt_pte so they point to GPT data.
*
* @param dev_desc - block device descriptor
* @param gpt_head - pointer to GPT header data read from medium
* @param gpt_pte - pointer to GPT partition table enties read from medium
*
* @return - '0' on success, otherwise error
*/
int gpt_verify_headers(struct blk_desc *dev_desc, gpt_header *gpt_head,
gpt_entry **gpt_pte);
/**
* gpt_verify_partitions() - Function to check if partitions' name, start and
* size correspond to '$partitions' env variable
*
* This function checks if on medium stored GPT data is in sync with information
* provided in '$partitions' environment variable. Specificially, name, start
* and size of the partition is checked.
*
* @param dev_desc - block device descriptor
* @param partitions - partition data read from '$partitions' env variable
* @param parts - number of partitions read from '$partitions' env variable
* @param gpt_head - pointer to GPT header data read from medium
* @param gpt_pte - pointer to GPT partition table enties read from medium
*
* @return - '0' on success, otherwise error
*/
int gpt_verify_partitions(struct blk_desc *dev_desc,
disk_partition_t *partitions, int parts,
gpt_header *gpt_head, gpt_entry **gpt_pte);
/**
* get_disk_guid() - Function to read the GUID string from a device's GPT
*
* This function reads the GUID string from a block device whose descriptor
* is provided.
*
* @param dev_desc - block device descriptor
* @param guid - pre-allocated string in which to return the GUID
*
* @return - '0' on success, otherwise error
*/
int get_disk_guid(struct blk_desc *dev_desc, char *guid);
#endif
#if CONFIG_IS_ENABLED(DOS_PARTITION)
/**
* is_valid_dos_buf() - Ensure that a DOS MBR image is valid
*
* @param buf - buffer which contains the MBR
*
* @return - '0' on success, otherwise error
*/
int is_valid_dos_buf(void *buf);
/**
* write_mbr_partition() - write DOS MBR
*
* @param dev_desc - block device descriptor
* @param buf - buffer which contains the MBR
*
* @return - '0' on success, otherwise error
*/
int write_mbr_partition(struct blk_desc *dev_desc, void *buf);
#endif
23 years ago
#endif /* _PART_H */