Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
24569 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: bc6ed0f9dc
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'bc6ed0f9dc'
${ noResults }
u-boot/include/mvmfp.h

85 lines
3.4 KiB
Raw Normal View History Unescape

gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs Most of the Marvell SoCs has Multi Function Pin (MFP) configuration registers For ex. ARMADA100. These registers are programmed to expose the specific functionality associated with respective SoC Pins This driver provides configuration APIs, using them, configuration need to be done in board specific code for ex- following code configures MFPs 107 and 108 for UART_TX/RX functionality int board_early_init_f(void) { u32 mfp_cfg[] = { /* Console on UART1 */ MFP107_UART1_RXD, MFP108_UART1_TXD, MFP_EOC /*End of configureation*/ }; /* configure MFP's */ mfp_config(mfp_cfg); return 0; } Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
14 years ago
/*
* (C) Copyright 2010
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
12 years ago
* SPDX-License-Identifier: GPL-2.0+
gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs Most of the Marvell SoCs has Multi Function Pin (MFP) configuration registers For ex. ARMADA100. These registers are programmed to expose the specific functionality associated with respective SoC Pins This driver provides configuration APIs, using them, configuration need to be done in board specific code for ex- following code configures MFPs 107 and 108 for UART_TX/RX functionality int board_early_init_f(void) { u32 mfp_cfg[] = { /* Console on UART1 */ MFP107_UART1_RXD, MFP108_UART1_TXD, MFP_EOC /*End of configureation*/ }; /* configure MFP's */ mfp_config(mfp_cfg); return 0; } Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
14 years ago
*/
#ifndef __MVMFP_H
#define __MVMFP_H
/*
* Header file for MultiFunctionPin (MFP) Configururation framework
*
* Processors Supported:
* 1. Marvell ARMADA100 Processors
*
* processor to be supported should be added here
*/
/*
* MFP configuration is represented by a 32-bit unsigned integer
*/
#define MFP(_off, _pull, _pF, _drv, _dF, _edge, _eF, _afn, _aF) ( \
/* bits 31..16 - MFP Register Offset */ (((_off) & 0xffff) << 16) | \
/* bits 15..13 - Run Mode Pull State */ (((_pull) & 0x7) << 13) | \
/* bit 12 - Unused */ \
/* bits 11..10 - Driver Strength */ (((_drv) & 0x3) << 10) | \
/* bit 09 - Pull State flag */ (((_pF) & 0x1) << 9) | \
/* bit 08 - Drv-strength flag */ (((_dF) & 0x1) << 8) | \
/* bit 07 - Edge-det flag */ (((_eF) & 0x1) << 7) | \
/* bits 06..04 - Edge Detection */ (((_edge) & 0x7) << 4) | \
/* bits 03..00 - Alt-fun flag */ (((_aF) & 0x1) << 3) | \
/* bits Alternate-fun select */ ((_afn) & 0x7))
/*
* to facilitate the definition, the following macros are provided
*
* offset, pull,pF, drv,dF, edge,eF ,afn,aF
*/
#define MFP_OFFSET_MASK MFP(0xffff, 0,0, 0,0, 0,0, 0,0)
#define MFP_REG(x) MFP(x, 0,0, 0,0, 0,0, 0,0)
#define MFP_REG_GET_OFFSET(x) ((x & MFP_OFFSET_MASK) >> 16)
#define MFP_AF_FLAG MFP(0x0000, 0,0, 0,0, 0,0, 0,1)
#define MFP_DRIVE_FLAG MFP(0x0000, 0,0, 0,1, 0,0, 0,0)
#define MFP_EDGE_FLAG MFP(0x0000, 0,0, 0,0, 0,1, 0,0)
#define MFP_PULL_FLAG MFP(0x0000, 0,1, 0,0, 0,0, 0,0)
#define MFP_AF0 MFP(0x0000, 0,0, 0,0, 0,0, 0,1)
#define MFP_AF1 MFP(0x0000, 0,0, 0,0, 0,0, 1,1)
#define MFP_AF2 MFP(0x0000, 0,0, 0,0, 0,0, 2,1)
#define MFP_AF3 MFP(0x0000, 0,0, 0,0, 0,0, 3,1)
#define MFP_AF4 MFP(0x0000, 0,0, 0,0, 0,0, 4,1)
#define MFP_AF5 MFP(0x0000, 0,0, 0,0, 0,0, 5,1)
#define MFP_AF6 MFP(0x0000, 0,0, 0,0, 0,0, 6,1)
#define MFP_AF7 MFP(0x0000, 0,0, 0,0, 0,0, 7,1)
#define MFP_AF_MASK MFP(0x0000, 0,0, 0,0, 0,0, 7,0)
#define MFP_LPM_EDGE_NONE MFP(0x0000, 0,0, 0,0, 0,1, 0,0)
#define MFP_LPM_EDGE_RISE MFP(0x0000, 0,0, 0,0, 1,1, 0,0)
#define MFP_LPM_EDGE_FALL MFP(0x0000, 0,0, 0,0, 2,1, 0,0)
#define MFP_LPM_EDGE_BOTH MFP(0x0000, 0,0, 0,0, 3,1, 0,0)
#define MFP_LPM_EDGE_MASK MFP(0x0000, 0,0, 0,0, 3,0, 0,0)
#define MFP_DRIVE_VERY_SLOW MFP(0x0000, 0,0, 0,1, 0,0, 0,0)
#define MFP_DRIVE_SLOW MFP(0x0000, 0,0, 1,1, 0,0, 0,0)
#define MFP_DRIVE_MEDIUM MFP(0x0000, 0,0, 2,1, 0,0, 0,0)
#define MFP_DRIVE_FAST MFP(0x0000, 0,0, 3,1, 0,0, 0,0)
#define MFP_DRIVE_MASK MFP(0x0000, 0,0, 3,0, 0,0, 0,0)
#define MFP_PULL_NONE MFP(0x0000, 0,1, 0,0, 0,0, 0,0)
#define MFP_PULL_LOW MFP(0x0000, 1,1, 0,0, 0,0, 0,0)
#define MFP_PULL_HIGH MFP(0x0000, 2,1, 0,0, 0,0, 0,0)
#define MFP_PULL_BOTH MFP(0x0000, 3,1, 0,0, 0,0, 0,0)
#define MFP_PULL_FLOAT MFP(0x0000, 4,1, 0,0, 0,0, 0,0)
#define MFP_PULL_MASK MFP(0x0000, 7,0, 0,0, 0,0, 0,0)
#define MFP_EOC 0xffffffff /* indicates end-of-conf */
/* Functions */
void mfp_config(u32 *mfp_cfgs);
#endif /* __MVMFP_H */