upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/lib/zlib/inflate.c

944 lines
34 KiB

/* inflate.c -- zlib decompression
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
local void fixedtables OF((struct inflate_state FAR *state));
local int updatewindow OF((z_streamp strm, unsigned out));
lib/zlib: sparse fixes define Z_NULL to (void *)0 include/u-boot/zlib.h to get rid of most of the NULL pointer warnings. inflate.c:942:1: warning: non-ANSI definition of function 'inflateEnd' inflate.c:9:1: warning: non-ANSI definition of function 'inflateReset' inflate.c:12:17: warning: Using plain integer as NULL pointer inflate.c:12:42: warning: Using plain integer as NULL pointer inflate.c:15:17: warning: Using plain integer as NULL pointer inflate.c:21:19: warning: Using plain integer as NULL pointer inflate.c:35:1: warning: non-ANSI definition of function 'inflateInit2_' inflate.c:38:20: warning: Using plain integer as NULL pointer inflate.c:41:17: warning: Using plain integer as NULL pointer inflate.c:42:17: warning: Using plain integer as NULL pointer inflate.c:50:18: warning: Using plain integer as NULL pointer inflate.c:65:23: warning: Using plain integer as NULL pointer inflate.c:69:21: warning: Using plain integer as NULL pointer inflate.c:78:1: warning: non-ANSI definition of function 'inflateInit_' inflate.c:86:1: warning: non-ANSI definition of function 'fixedtables' inflate.c:108:26: warning: Using plain integer as NULL pointer inflate.c:109:1: warning: non-ANSI definition of function 'updatewindow' inflate.c:112:30: warning: Using plain integer as NULL pointer inflate.c:339:1: warning: non-ANSI definition of function 'inflate' inflate.c:349:17: warning: Using plain integer as NULL pointer inflate.c:349:42: warning: Using plain integer as NULL pointer inflate.c:350:27: warning: Using plain integer as NULL pointer inflate.c:369:42: warning: Using plain integer as NULL pointer inflate.c:376:32: warning: Using plain integer as NULL pointer inflate.c:401:54: warning: Using plain integer as NULL pointer inflate.c:419:32: warning: Using plain integer as NULL pointer inflate.c:426:32: warning: Using plain integer as NULL pointer inflate.c:433:32: warning: Using plain integer as NULL pointer inflate.c:444:36: warning: Using plain integer as NULL pointer inflate.c:449:37: warning: Using plain integer as NULL pointer inflate.c:450:38: warning: Using plain integer as NULL pointer inflate.c:457:40: warning: Using plain integer as NULL pointer inflate.c:458:47: warning: Using plain integer as NULL pointer inflate.c:480:40: warning: Using plain integer as NULL pointer inflate.c:481:50: warning: Using plain integer as NULL pointer inflate.c:491:37: warning: Using plain integer as NULL pointer inflate.c:492:37: warning: Using plain integer as NULL pointer inflate.c:501:40: warning: Using plain integer as NULL pointer inflate.c:502:53: warning: Using plain integer as NULL pointer inflate.c:512:37: warning: Using plain integer as NULL pointer inflate.c:513:40: warning: Using plain integer as NULL pointer inflate.c:525:32: warning: Using plain integer as NULL pointer inflate.c:529:52: warning: Using plain integer as NULL pointer inflate.c:543:54: warning: Using plain integer as NULL pointer inflate.c:932:17: warning: Using plain integer as NULL pointer inflate.c:932:42: warning: Using plain integer as NULL pointer inflate.c:935:26: warning: Using plain integer as NULL pointer inflate.c:940:19: warning: Using plain integer as NULL pointer adler32.c:58:5: warning: non-ANSI definition of function 'adler32' adler32.c:81:16: warning: Using plain integer as NULL pointer zutil.c:53:9: warning: non-ANSI definition of function 'zcalloc' zutil.c:64:9: warning: non-ANSI definition of function 'zcfree' inffast.c:70:1: warning: non-ANSI definition of function 'inflate_fast' inftrees.c:33:1: warning: non-ANSI definition of function 'inflate_table' Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years ago
int ZEXPORT inflateReset(z_streamp strm)
{
struct inflate_state FAR *state;
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
strm->total_in = strm->total_out = state->total = 0;
strm->msg = Z_NULL;
strm->adler = 1; /* to support ill-conceived Java test suite */
state->mode = HEAD;
state->last = 0;
state->havedict = 0;
state->dmax = 32768U;
state->head = Z_NULL;
state->wsize = 0;
state->whave = 0;
state->write = 0;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
WATCHDOG_RESET();
Tracev((stderr, "inflate: reset\n"));
return Z_OK;
}
lib/zlib: sparse fixes define Z_NULL to (void *)0 include/u-boot/zlib.h to get rid of most of the NULL pointer warnings. inflate.c:942:1: warning: non-ANSI definition of function 'inflateEnd' inflate.c:9:1: warning: non-ANSI definition of function 'inflateReset' inflate.c:12:17: warning: Using plain integer as NULL pointer inflate.c:12:42: warning: Using plain integer as NULL pointer inflate.c:15:17: warning: Using plain integer as NULL pointer inflate.c:21:19: warning: Using plain integer as NULL pointer inflate.c:35:1: warning: non-ANSI definition of function 'inflateInit2_' inflate.c:38:20: warning: Using plain integer as NULL pointer inflate.c:41:17: warning: Using plain integer as NULL pointer inflate.c:42:17: warning: Using plain integer as NULL pointer inflate.c:50:18: warning: Using plain integer as NULL pointer inflate.c:65:23: warning: Using plain integer as NULL pointer inflate.c:69:21: warning: Using plain integer as NULL pointer inflate.c:78:1: warning: non-ANSI definition of function 'inflateInit_' inflate.c:86:1: warning: non-ANSI definition of function 'fixedtables' inflate.c:108:26: warning: Using plain integer as NULL pointer inflate.c:109:1: warning: non-ANSI definition of function 'updatewindow' inflate.c:112:30: warning: Using plain integer as NULL pointer inflate.c:339:1: warning: non-ANSI definition of function 'inflate' inflate.c:349:17: warning: Using plain integer as NULL pointer inflate.c:349:42: warning: Using plain integer as NULL pointer inflate.c:350:27: warning: Using plain integer as NULL pointer inflate.c:369:42: warning: Using plain integer as NULL pointer inflate.c:376:32: warning: Using plain integer as NULL pointer inflate.c:401:54: warning: Using plain integer as NULL pointer inflate.c:419:32: warning: Using plain integer as NULL pointer inflate.c:426:32: warning: Using plain integer as NULL pointer inflate.c:433:32: warning: Using plain integer as NULL pointer inflate.c:444:36: warning: Using plain integer as NULL pointer inflate.c:449:37: warning: Using plain integer as NULL pointer inflate.c:450:38: warning: Using plain integer as NULL pointer inflate.c:457:40: warning: Using plain integer as NULL pointer inflate.c:458:47: warning: Using plain integer as NULL pointer inflate.c:480:40: warning: Using plain integer as NULL pointer inflate.c:481:50: warning: Using plain integer as NULL pointer inflate.c:491:37: warning: Using plain integer as NULL pointer inflate.c:492:37: warning: Using plain integer as NULL pointer inflate.c:501:40: warning: Using plain integer as NULL pointer inflate.c:502:53: warning: Using plain integer as NULL pointer inflate.c:512:37: warning: Using plain integer as NULL pointer inflate.c:513:40: warning: Using plain integer as NULL pointer inflate.c:525:32: warning: Using plain integer as NULL pointer inflate.c:529:52: warning: Using plain integer as NULL pointer inflate.c:543:54: warning: Using plain integer as NULL pointer inflate.c:932:17: warning: Using plain integer as NULL pointer inflate.c:932:42: warning: Using plain integer as NULL pointer inflate.c:935:26: warning: Using plain integer as NULL pointer inflate.c:940:19: warning: Using plain integer as NULL pointer adler32.c:58:5: warning: non-ANSI definition of function 'adler32' adler32.c:81:16: warning: Using plain integer as NULL pointer zutil.c:53:9: warning: non-ANSI definition of function 'zcalloc' zutil.c:64:9: warning: non-ANSI definition of function 'zcfree' inffast.c:70:1: warning: non-ANSI definition of function 'inflate_fast' inftrees.c:33:1: warning: non-ANSI definition of function 'inflate_table' Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years ago
int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, const char *version,
int stream_size)
{
struct inflate_state FAR *state;
if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
stream_size != (int)(sizeof(z_stream)))
return Z_VERSION_ERROR;
if (strm == Z_NULL) return Z_STREAM_ERROR;
strm->msg = Z_NULL; /* in case we return an error */
if (strm->zalloc == (alloc_func)0) {
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
}
if (strm->zfree == (free_func)0) strm->zfree = zcfree;
state = (struct inflate_state FAR *)
ZALLOC(strm, 1, sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
strm->state = (struct internal_state FAR *)state;
if (windowBits < 0) {
state->wrap = 0;
windowBits = -windowBits;
}
else {
state->wrap = (windowBits >> 4) + 1;
#ifdef GUNZIP
if (windowBits < 48) windowBits &= 15;
#endif
}
if (windowBits < 8 || windowBits > 15) {
ZFREE(strm, state);
strm->state = Z_NULL;
return Z_STREAM_ERROR;
}
state->wbits = (unsigned)windowBits;
state->window = Z_NULL;
return inflateReset(strm);
}
lib/zlib: sparse fixes define Z_NULL to (void *)0 include/u-boot/zlib.h to get rid of most of the NULL pointer warnings. inflate.c:942:1: warning: non-ANSI definition of function 'inflateEnd' inflate.c:9:1: warning: non-ANSI definition of function 'inflateReset' inflate.c:12:17: warning: Using plain integer as NULL pointer inflate.c:12:42: warning: Using plain integer as NULL pointer inflate.c:15:17: warning: Using plain integer as NULL pointer inflate.c:21:19: warning: Using plain integer as NULL pointer inflate.c:35:1: warning: non-ANSI definition of function 'inflateInit2_' inflate.c:38:20: warning: Using plain integer as NULL pointer inflate.c:41:17: warning: Using plain integer as NULL pointer inflate.c:42:17: warning: Using plain integer as NULL pointer inflate.c:50:18: warning: Using plain integer as NULL pointer inflate.c:65:23: warning: Using plain integer as NULL pointer inflate.c:69:21: warning: Using plain integer as NULL pointer inflate.c:78:1: warning: non-ANSI definition of function 'inflateInit_' inflate.c:86:1: warning: non-ANSI definition of function 'fixedtables' inflate.c:108:26: warning: Using plain integer as NULL pointer inflate.c:109:1: warning: non-ANSI definition of function 'updatewindow' inflate.c:112:30: warning: Using plain integer as NULL pointer inflate.c:339:1: warning: non-ANSI definition of function 'inflate' inflate.c:349:17: warning: Using plain integer as NULL pointer inflate.c:349:42: warning: Using plain integer as NULL pointer inflate.c:350:27: warning: Using plain integer as NULL pointer inflate.c:369:42: warning: Using plain integer as NULL pointer inflate.c:376:32: warning: Using plain integer as NULL pointer inflate.c:401:54: warning: Using plain integer as NULL pointer inflate.c:419:32: warning: Using plain integer as NULL pointer inflate.c:426:32: warning: Using plain integer as NULL pointer inflate.c:433:32: warning: Using plain integer as NULL pointer inflate.c:444:36: warning: Using plain integer as NULL pointer inflate.c:449:37: warning: Using plain integer as NULL pointer inflate.c:450:38: warning: Using plain integer as NULL pointer inflate.c:457:40: warning: Using plain integer as NULL pointer inflate.c:458:47: warning: Using plain integer as NULL pointer inflate.c:480:40: warning: Using plain integer as NULL pointer inflate.c:481:50: warning: Using plain integer as NULL pointer inflate.c:491:37: warning: Using plain integer as NULL pointer inflate.c:492:37: warning: Using plain integer as NULL pointer inflate.c:501:40: warning: Using plain integer as NULL pointer inflate.c:502:53: warning: Using plain integer as NULL pointer inflate.c:512:37: warning: Using plain integer as NULL pointer inflate.c:513:40: warning: Using plain integer as NULL pointer inflate.c:525:32: warning: Using plain integer as NULL pointer inflate.c:529:52: warning: Using plain integer as NULL pointer inflate.c:543:54: warning: Using plain integer as NULL pointer inflate.c:932:17: warning: Using plain integer as NULL pointer inflate.c:932:42: warning: Using plain integer as NULL pointer inflate.c:935:26: warning: Using plain integer as NULL pointer inflate.c:940:19: warning: Using plain integer as NULL pointer adler32.c:58:5: warning: non-ANSI definition of function 'adler32' adler32.c:81:16: warning: Using plain integer as NULL pointer zutil.c:53:9: warning: non-ANSI definition of function 'zcalloc' zutil.c:64:9: warning: non-ANSI definition of function 'zcfree' inffast.c:70:1: warning: non-ANSI definition of function 'inflate_fast' inftrees.c:33:1: warning: non-ANSI definition of function 'inflate_table' Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years ago
int ZEXPORT inflateInit_(z_streamp strm, const char *version, int stream_size)
{
return inflateInit2_(strm, DEF_WBITS, version, stream_size);
}
lib/zlib: sparse fixes define Z_NULL to (void *)0 include/u-boot/zlib.h to get rid of most of the NULL pointer warnings. inflate.c:942:1: warning: non-ANSI definition of function 'inflateEnd' inflate.c:9:1: warning: non-ANSI definition of function 'inflateReset' inflate.c:12:17: warning: Using plain integer as NULL pointer inflate.c:12:42: warning: Using plain integer as NULL pointer inflate.c:15:17: warning: Using plain integer as NULL pointer inflate.c:21:19: warning: Using plain integer as NULL pointer inflate.c:35:1: warning: non-ANSI definition of function 'inflateInit2_' inflate.c:38:20: warning: Using plain integer as NULL pointer inflate.c:41:17: warning: Using plain integer as NULL pointer inflate.c:42:17: warning: Using plain integer as NULL pointer inflate.c:50:18: warning: Using plain integer as NULL pointer inflate.c:65:23: warning: Using plain integer as NULL pointer inflate.c:69:21: warning: Using plain integer as NULL pointer inflate.c:78:1: warning: non-ANSI definition of function 'inflateInit_' inflate.c:86:1: warning: non-ANSI definition of function 'fixedtables' inflate.c:108:26: warning: Using plain integer as NULL pointer inflate.c:109:1: warning: non-ANSI definition of function 'updatewindow' inflate.c:112:30: warning: Using plain integer as NULL pointer inflate.c:339:1: warning: non-ANSI definition of function 'inflate' inflate.c:349:17: warning: Using plain integer as NULL pointer inflate.c:349:42: warning: Using plain integer as NULL pointer inflate.c:350:27: warning: Using plain integer as NULL pointer inflate.c:369:42: warning: Using plain integer as NULL pointer inflate.c:376:32: warning: Using plain integer as NULL pointer inflate.c:401:54: warning: Using plain integer as NULL pointer inflate.c:419:32: warning: Using plain integer as NULL pointer inflate.c:426:32: warning: Using plain integer as NULL pointer inflate.c:433:32: warning: Using plain integer as NULL pointer inflate.c:444:36: warning: Using plain integer as NULL pointer inflate.c:449:37: warning: Using plain integer as NULL pointer inflate.c:450:38: warning: Using plain integer as NULL pointer inflate.c:457:40: warning: Using plain integer as NULL pointer inflate.c:458:47: warning: Using plain integer as NULL pointer inflate.c:480:40: warning: Using plain integer as NULL pointer inflate.c:481:50: warning: Using plain integer as NULL pointer inflate.c:491:37: warning: Using plain integer as NULL pointer inflate.c:492:37: warning: Using plain integer as NULL pointer inflate.c:501:40: warning: Using plain integer as NULL pointer inflate.c:502:53: warning: Using plain integer as NULL pointer inflate.c:512:37: warning: Using plain integer as NULL pointer inflate.c:513:40: warning: Using plain integer as NULL pointer inflate.c:525:32: warning: Using plain integer as NULL pointer inflate.c:529:52: warning: Using plain integer as NULL pointer inflate.c:543:54: warning: Using plain integer as NULL pointer inflate.c:932:17: warning: Using plain integer as NULL pointer inflate.c:932:42: warning: Using plain integer as NULL pointer inflate.c:935:26: warning: Using plain integer as NULL pointer inflate.c:940:19: warning: Using plain integer as NULL pointer adler32.c:58:5: warning: non-ANSI definition of function 'adler32' adler32.c:81:16: warning: Using plain integer as NULL pointer zutil.c:53:9: warning: non-ANSI definition of function 'zcalloc' zutil.c:64:9: warning: non-ANSI definition of function 'zcfree' inffast.c:70:1: warning: non-ANSI definition of function 'inflate_fast' inftrees.c:33:1: warning: non-ANSI definition of function 'inflate_table' Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years ago
local void fixedtables(struct inflate_state FAR *state)
{
state->lencode = lenfix;
state->lenbits = 9;
state->distcode = distfix;
state->distbits = 5;
}
/*
Update the window with the last wsize (normally 32K) bytes written before
returning. If window does not exist yet, create it. This is only called
when a window is already in use, or when output has been written during this
inflate call, but the end of the deflate stream has not been reached yet.
It is also called to create a window for dictionary data when a dictionary
is loaded.
Providing output buffers larger than 32K to inflate() should provide a speed
advantage, since only the last 32K of output is copied to the sliding window
upon return from inflate(), and since all distances after the first 32K of
output will fall in the output data, making match copies simpler and faster.
The advantage may be dependent on the size of the processor's data caches.
*/
lib/zlib: sparse fixes define Z_NULL to (void *)0 include/u-boot/zlib.h to get rid of most of the NULL pointer warnings. inflate.c:942:1: warning: non-ANSI definition of function 'inflateEnd' inflate.c:9:1: warning: non-ANSI definition of function 'inflateReset' inflate.c:12:17: warning: Using plain integer as NULL pointer inflate.c:12:42: warning: Using plain integer as NULL pointer inflate.c:15:17: warning: Using plain integer as NULL pointer inflate.c:21:19: warning: Using plain integer as NULL pointer inflate.c:35:1: warning: non-ANSI definition of function 'inflateInit2_' inflate.c:38:20: warning: Using plain integer as NULL pointer inflate.c:41:17: warning: Using plain integer as NULL pointer inflate.c:42:17: warning: Using plain integer as NULL pointer inflate.c:50:18: warning: Using plain integer as NULL pointer inflate.c:65:23: warning: Using plain integer as NULL pointer inflate.c:69:21: warning: Using plain integer as NULL pointer inflate.c:78:1: warning: non-ANSI definition of function 'inflateInit_' inflate.c:86:1: warning: non-ANSI definition of function 'fixedtables' inflate.c:108:26: warning: Using plain integer as NULL pointer inflate.c:109:1: warning: non-ANSI definition of function 'updatewindow' inflate.c:112:30: warning: Using plain integer as NULL pointer inflate.c:339:1: warning: non-ANSI definition of function 'inflate' inflate.c:349:17: warning: Using plain integer as NULL pointer inflate.c:349:42: warning: Using plain integer as NULL pointer inflate.c:350:27: warning: Using plain integer as NULL pointer inflate.c:369:42: warning: Using plain integer as NULL pointer inflate.c:376:32: warning: Using plain integer as NULL pointer inflate.c:401:54: warning: Using plain integer as NULL pointer inflate.c:419:32: warning: Using plain integer as NULL pointer inflate.c:426:32: warning: Using plain integer as NULL pointer inflate.c:433:32: warning: Using plain integer as NULL pointer inflate.c:444:36: warning: Using plain integer as NULL pointer inflate.c:449:37: warning: Using plain integer as NULL pointer inflate.c:450:38: warning: Using plain integer as NULL pointer inflate.c:457:40: warning: Using plain integer as NULL pointer inflate.c:458:47: warning: Using plain integer as NULL pointer inflate.c:480:40: warning: Using plain integer as NULL pointer inflate.c:481:50: warning: Using plain integer as NULL pointer inflate.c:491:37: warning: Using plain integer as NULL pointer inflate.c:492:37: warning: Using plain integer as NULL pointer inflate.c:501:40: warning: Using plain integer as NULL pointer inflate.c:502:53: warning: Using plain integer as NULL pointer inflate.c:512:37: warning: Using plain integer as NULL pointer inflate.c:513:40: warning: Using plain integer as NULL pointer inflate.c:525:32: warning: Using plain integer as NULL pointer inflate.c:529:52: warning: Using plain integer as NULL pointer inflate.c:543:54: warning: Using plain integer as NULL pointer inflate.c:932:17: warning: Using plain integer as NULL pointer inflate.c:932:42: warning: Using plain integer as NULL pointer inflate.c:935:26: warning: Using plain integer as NULL pointer inflate.c:940:19: warning: Using plain integer as NULL pointer adler32.c:58:5: warning: non-ANSI definition of function 'adler32' adler32.c:81:16: warning: Using plain integer as NULL pointer zutil.c:53:9: warning: non-ANSI definition of function 'zcalloc' zutil.c:64:9: warning: non-ANSI definition of function 'zcfree' inffast.c:70:1: warning: non-ANSI definition of function 'inflate_fast' inftrees.c:33:1: warning: non-ANSI definition of function 'inflate_table' Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years ago
local int updatewindow(z_streamp strm, unsigned out)
{
struct inflate_state FAR *state;
unsigned copy, dist;
state = (struct inflate_state FAR *)strm->state;
/* if it hasn't been done already, allocate space for the window */
if (state->window == Z_NULL) {
state->window = (unsigned char FAR *)
ZALLOC(strm, 1U << state->wbits,
sizeof(unsigned char));
if (state->window == Z_NULL) return 1;
}
/* if window not in use yet, initialize */
if (state->wsize == 0) {
state->wsize = 1U << state->wbits;
state->write = 0;
state->whave = 0;
}
/* copy state->wsize or less output bytes into the circular window */
copy = out - strm->avail_out;
if (copy >= state->wsize) {
zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
state->write = 0;
state->whave = state->wsize;
}
else {
dist = state->wsize - state->write;
if (dist > copy) dist = copy;
zmemcpy(state->window + state->write, strm->next_out - copy, dist);
copy -= dist;
if (copy) {
zmemcpy(state->window, strm->next_out - copy, copy);
state->write = copy;
state->whave = state->wsize;
}
else {
state->write += dist;
if (state->write == state->wsize) state->write = 0;
if (state->whave < state->wsize) state->whave += dist;
}
}
return 0;
}
/* Macros for inflate(): */
/* check function to use adler32() for zlib or crc32() for gzip */
#ifdef GUNZIP
# define UPDATE(check, buf, len) \
(state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
#else
# define UPDATE(check, buf, len) adler32(check, buf, len)
#endif
/* check macros for header crc */
#ifdef GUNZIP
# define CRC2(check, word) \
do { \
hbuf[0] = (unsigned char)(word); \
hbuf[1] = (unsigned char)((word) >> 8); \
check = crc32(check, hbuf, 2); \
} while (0)
# define CRC4(check, word) \
do { \
hbuf[0] = (unsigned char)(word); \
hbuf[1] = (unsigned char)((word) >> 8); \
hbuf[2] = (unsigned char)((word) >> 16); \
hbuf[3] = (unsigned char)((word) >> 24); \
check = crc32(check, hbuf, 4); \
} while (0)
#endif
/* Load registers with state in inflate() for speed */
#define LOAD() \
do { \
put = strm->next_out; \
left = strm->avail_out; \
next = strm->next_in; \
have = strm->avail_in; \
hold = state->hold; \
bits = state->bits; \
} while (0)
/* Restore state from registers in inflate() */
#define RESTORE() \
do { \
strm->next_out = put; \
strm->avail_out = left; \
strm->next_in = next; \
strm->avail_in = have; \
state->hold = hold; \
state->bits = bits; \
} while (0)
/* Clear the input bit accumulator */
#define INITBITS() \
do { \
hold = 0; \
bits = 0; \
} while (0)
/* Get a byte of input into the bit accumulator, or return from inflate()
if there is no input available. */
#define PULLBYTE() \
do { \
if (have == 0) goto inf_leave; \
have--; \
hold += (unsigned long)(*next++) << bits; \
bits += 8; \
} while (0)
/* Assure that there are at least n bits in the bit accumulator. If there is
not enough available input to do that, then return from inflate(). */
#define NEEDBITS(n) \
do { \
while (bits < (unsigned)(n)) \
PULLBYTE(); \
} while (0)
/* Return the low n bits of the bit accumulator (n < 16) */
#define BITS(n) \
((unsigned)hold & ((1U << (n)) - 1))
/* Remove n bits from the bit accumulator */
#define DROPBITS(n) \
do { \
hold >>= (n); \
bits -= (unsigned)(n); \
} while (0)
/* Remove zero to seven bits as needed to go to a byte boundary */
#define BYTEBITS() \
do { \
hold >>= bits & 7; \
bits -= bits & 7; \
} while (0)
/* Reverse the bytes in a 32-bit value */
#define REVERSE(q) \
((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
(((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
/*
inflate() uses a state machine to process as much input data and generate as
much output data as possible before returning. The state machine is
structured roughly as follows:
for (;;) switch (state) {
...
case STATEn:
if (not enough input data or output space to make progress)
return;
... make progress ...
state = STATEm;
break;
...
}
so when inflate() is called again, the same case is attempted again, and
if the appropriate resources are provided, the machine proceeds to the
next state. The NEEDBITS() macro is usually the way the state evaluates
whether it can proceed or should return. NEEDBITS() does the return if
the requested bits are not available. The typical use of the BITS macros
is:
NEEDBITS(n);
... do something with BITS(n) ...
DROPBITS(n);
where NEEDBITS(n) either returns from inflate() if there isn't enough
input left to load n bits into the accumulator, or it continues. BITS(n)
gives the low n bits in the accumulator. When done, DROPBITS(n) drops
the low n bits off the accumulator. INITBITS() clears the accumulator
and sets the number of available bits to zero. BYTEBITS() discards just
enough bits to put the accumulator on a byte boundary. After BYTEBITS()
and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
if there is no input available. The decoding of variable length codes uses
PULLBYTE() directly in order to pull just enough bytes to decode the next
code, and no more.
Some states loop until they get enough input, making sure that enough
state information is maintained to continue the loop where it left off
if NEEDBITS() returns in the loop. For example, want, need, and keep
would all have to actually be part of the saved state in case NEEDBITS()
returns:
case STATEw:
while (want < need) {
NEEDBITS(n);
keep[want++] = BITS(n);
DROPBITS(n);
}
state = STATEx;
case STATEx:
As shown above, if the next state is also the next case, then the break
is omitted.
A state may also return if there is not enough output space available to
complete that state. Those states are copying stored data, writing a
literal byte, and copying a matching string.
When returning, a "goto inf_leave" is used to update the total counters,
update the check value, and determine whether any progress has been made
during that inflate() call in order to return the proper return code.
Progress is defined as a change in either strm->avail_in or strm->avail_out.
When there is a window, goto inf_leave will update the window with the last
output written. If a goto inf_leave occurs in the middle of decompression
and there is no window currently, goto inf_leave will create one and copy
output to the window for the next call of inflate().
In this implementation, the flush parameter of inflate() only affects the
return code (per zlib.h). inflate() always writes as much as possible to
strm->next_out, given the space available and the provided input--the effect
documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
the allocation of and copying into a sliding window until necessary, which
provides the effect documented in zlib.h for Z_FINISH when the entire input
stream available. So the only thing the flush parameter actually does is:
when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
will return Z_BUF_ERROR if it has not reached the end of the stream.
*/
lib/zlib: sparse fixes define Z_NULL to (void *)0 include/u-boot/zlib.h to get rid of most of the NULL pointer warnings. inflate.c:942:1: warning: non-ANSI definition of function 'inflateEnd' inflate.c:9:1: warning: non-ANSI definition of function 'inflateReset' inflate.c:12:17: warning: Using plain integer as NULL pointer inflate.c:12:42: warning: Using plain integer as NULL pointer inflate.c:15:17: warning: Using plain integer as NULL pointer inflate.c:21:19: warning: Using plain integer as NULL pointer inflate.c:35:1: warning: non-ANSI definition of function 'inflateInit2_' inflate.c:38:20: warning: Using plain integer as NULL pointer inflate.c:41:17: warning: Using plain integer as NULL pointer inflate.c:42:17: warning: Using plain integer as NULL pointer inflate.c:50:18: warning: Using plain integer as NULL pointer inflate.c:65:23: warning: Using plain integer as NULL pointer inflate.c:69:21: warning: Using plain integer as NULL pointer inflate.c:78:1: warning: non-ANSI definition of function 'inflateInit_' inflate.c:86:1: warning: non-ANSI definition of function 'fixedtables' inflate.c:108:26: warning: Using plain integer as NULL pointer inflate.c:109:1: warning: non-ANSI definition of function 'updatewindow' inflate.c:112:30: warning: Using plain integer as NULL pointer inflate.c:339:1: warning: non-ANSI definition of function 'inflate' inflate.c:349:17: warning: Using plain integer as NULL pointer inflate.c:349:42: warning: Using plain integer as NULL pointer inflate.c:350:27: warning: Using plain integer as NULL pointer inflate.c:369:42: warning: Using plain integer as NULL pointer inflate.c:376:32: warning: Using plain integer as NULL pointer inflate.c:401:54: warning: Using plain integer as NULL pointer inflate.c:419:32: warning: Using plain integer as NULL pointer inflate.c:426:32: warning: Using plain integer as NULL pointer inflate.c:433:32: warning: Using plain integer as NULL pointer inflate.c:444:36: warning: Using plain integer as NULL pointer inflate.c:449:37: warning: Using plain integer as NULL pointer inflate.c:450:38: warning: Using plain integer as NULL pointer inflate.c:457:40: warning: Using plain integer as NULL pointer inflate.c:458:47: warning: Using plain integer as NULL pointer inflate.c:480:40: warning: Using plain integer as NULL pointer inflate.c:481:50: warning: Using plain integer as NULL pointer inflate.c:491:37: warning: Using plain integer as NULL pointer inflate.c:492:37: warning: Using plain integer as NULL pointer inflate.c:501:40: warning: Using plain integer as NULL pointer inflate.c:502:53: warning: Using plain integer as NULL pointer inflate.c:512:37: warning: Using plain integer as NULL pointer inflate.c:513:40: warning: Using plain integer as NULL pointer inflate.c:525:32: warning: Using plain integer as NULL pointer inflate.c:529:52: warning: Using plain integer as NULL pointer inflate.c:543:54: warning: Using plain integer as NULL pointer inflate.c:932:17: warning: Using plain integer as NULL pointer inflate.c:932:42: warning: Using plain integer as NULL pointer inflate.c:935:26: warning: Using plain integer as NULL pointer inflate.c:940:19: warning: Using plain integer as NULL pointer adler32.c:58:5: warning: non-ANSI definition of function 'adler32' adler32.c:81:16: warning: Using plain integer as NULL pointer zutil.c:53:9: warning: non-ANSI definition of function 'zcalloc' zutil.c:64:9: warning: non-ANSI definition of function 'zcfree' inffast.c:70:1: warning: non-ANSI definition of function 'inflate_fast' inftrees.c:33:1: warning: non-ANSI definition of function 'inflate_table' Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years ago
int ZEXPORT inflate(z_streamp strm, int flush)
{
struct inflate_state FAR *state;
unsigned char FAR *next; /* next input */
unsigned char FAR *put; /* next output */
unsigned have, left; /* available input and output */
unsigned long hold; /* bit buffer */
unsigned bits; /* bits in bit buffer */
unsigned in, out; /* save starting available input and output */
unsigned copy; /* number of stored or match bytes to copy */
unsigned char FAR *from; /* where to copy match bytes from */
code this; /* current decoding table entry */
code last; /* parent table entry */
unsigned len; /* length to copy for repeats, bits to drop */
int ret; /* return code */
#ifdef GUNZIP
unsigned char hbuf[4]; /* buffer for gzip header crc calculation */
#endif
static const unsigned short order[19] = /* permutation of code lengths */
{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
if (strm == Z_NULL || strm->state == Z_NULL ||
(strm->next_in == Z_NULL && strm->avail_in != 0))
return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
LOAD();
in = have;
out = left;
ret = Z_OK;
for (;;)
switch (state->mode) {
case HEAD:
if (state->wrap == 0) {
state->mode = TYPEDO;
break;
}
NEEDBITS(16);
#ifdef GUNZIP
if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */
state->check = crc32(0L, Z_NULL, 0);
CRC2(state->check, hold);
INITBITS();
state->mode = FLAGS;
break;
}
state->flags = 0; /* expect zlib header */
if (state->head != Z_NULL)
state->head->done = -1;
if (!(state->wrap & 1) || /* check if zlib header allowed */
#else
if (
#endif
((BITS(8) << 8) + (hold >> 8)) % 31) {
strm->msg = (char *)"incorrect header check";
state->mode = BAD;
break;
}
if (BITS(4) != Z_DEFLATED) {
strm->msg = (char *)"unknown compression method";
state->mode = BAD;
break;
}
DROPBITS(4);
len = BITS(4) + 8;
if (len > state->wbits) {
strm->msg = (char *)"invalid window size";
state->mode = BAD;
break;
}
state->dmax = 1U << len;
Tracev((stderr, "inflate: zlib header ok\n"));
strm->adler = state->check = adler32(0L, Z_NULL, 0);
state->mode = hold & 0x200 ? DICTID : TYPE;
INITBITS();
break;
#ifdef GUNZIP
case FLAGS:
NEEDBITS(16);
state->flags = (int)(hold);
if ((state->flags & 0xff) != Z_DEFLATED) {
strm->msg = (char *)"unknown compression method";
state->mode = BAD;
break;
}
if (state->flags & 0xe000) {
strm->msg = (char *)"unknown header flags set";
state->mode = BAD;
break;
}
if (state->head != Z_NULL)
state->head->text = (int)((hold >> 8) & 1);
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
state->mode = TIME;
case TIME:
NEEDBITS(32);
if (state->head != Z_NULL)
state->head->time = hold;
if (state->flags & 0x0200) CRC4(state->check, hold);
INITBITS();
state->mode = OS;
case OS:
NEEDBITS(16);
if (state->head != Z_NULL) {
state->head->xflags = (int)(hold & 0xff);
state->head->os = (int)(hold >> 8);
}
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
state->mode = EXLEN;
case EXLEN:
if (state->flags & 0x0400) {
NEEDBITS(16);
state->length = (unsigned)(hold);
if (state->head != Z_NULL)
state->head->extra_len = (unsigned)hold;
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
}
else if (state->head != Z_NULL)
state->head->extra = Z_NULL;
state->mode = EXTRA;
case EXTRA:
if (state->flags & 0x0400) {
copy = state->length;
if (copy > have) copy = have;
if (copy) {
if (state->head != Z_NULL &&
state->head->extra != Z_NULL) {
len = state->head->extra_len - state->length;
zmemcpy(state->head->extra + len, next,
len + copy > state->head->extra_max ?
state->head->extra_max - len : copy);
}
if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
next += copy;
state->length -= copy;
}
if (state->length) goto inf_leave;
}
state->length = 0;
state->mode = NAME;
case NAME:
if (state->flags & 0x0800) {
if (have == 0) goto inf_leave;
copy = 0;
do {
len = (unsigned)(next[copy++]);
if (state->head != Z_NULL &&
state->head->name != Z_NULL &&
state->length < state->head->name_max)
state->head->name[state->length++] = len;
} while (len && copy < have);
if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
next += copy;
if (len) goto inf_leave;
}
else if (state->head != Z_NULL)
state->head->name = Z_NULL;
state->length = 0;
state->mode = COMMENT;
case COMMENT:
if (state->flags & 0x1000) {
if (have == 0) goto inf_leave;
copy = 0;
do {
len = (unsigned)(next[copy++]);
if (state->head != Z_NULL &&
state->head->comment != Z_NULL &&
state->length < state->head->comm_max)
state->head->comment[state->length++] = len;
} while (len && copy < have);
if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
next += copy;
if (len) goto inf_leave;
}
else if (state->head != Z_NULL)
state->head->comment = Z_NULL;
state->mode = HCRC;
case HCRC:
if (state->flags & 0x0200) {
NEEDBITS(16);
if (hold != (state->check & 0xffff)) {
strm->msg = (char *)"header crc mismatch";
state->mode = BAD;
break;
}
INITBITS();
}
if (state->head != Z_NULL) {
state->head->hcrc = (int)((state->flags >> 9) & 1);
state->head->done = 1;
}
strm->adler = state->check = crc32(0L, Z_NULL, 0);
state->mode = TYPE;
break;
#endif
case DICTID:
NEEDBITS(32);
strm->adler = state->check = REVERSE(hold);
INITBITS();
state->mode = DICT;
case DICT:
if (state->havedict == 0) {
RESTORE();
return Z_NEED_DICT;
}
strm->adler = state->check = adler32(0L, Z_NULL, 0);
state->mode = TYPE;
case TYPE:
WATCHDOG_RESET();
if (flush == Z_BLOCK) goto inf_leave;
case TYPEDO:
if (state->last) {
BYTEBITS();
state->mode = CHECK;
break;
}
NEEDBITS(3);
state->last = BITS(1);
DROPBITS(1);
switch (BITS(2)) {
case 0: /* stored block */
Tracev((stderr, "inflate: stored block%s\n",
state->last ? " (last)" : ""));
state->mode = STORED;
break;
case 1: /* fixed block */
fixedtables(state);
Tracev((stderr, "inflate: fixed codes block%s\n",
state->last ? " (last)" : ""));
state->mode = LEN; /* decode codes */
break;
case 2: /* dynamic block */
Tracev((stderr, "inflate: dynamic codes block%s\n",
state->last ? " (last)" : ""));
state->mode = TABLE;
break;
case 3:
strm->msg = (char *)"invalid block type";
state->mode = BAD;
}
DROPBITS(2);
break;
case STORED:
BYTEBITS(); /* go to byte boundary */
NEEDBITS(32);
if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
strm->msg = (char *)"invalid stored block lengths";
state->mode = BAD;
break;
}
state->length = (unsigned)hold & 0xffff;
Tracev((stderr, "inflate: stored length %u\n",
state->length));
INITBITS();
state->mode = COPY;
case COPY:
copy = state->length;
if (copy) {
if (copy > have) copy = have;
if (copy > left) copy = left;
if (copy == 0) goto inf_leave;
zmemcpy(put, next, copy);
have -= copy;
next += copy;
left -= copy;
put += copy;
state->length -= copy;
break;
}
Tracev((stderr, "inflate: stored end\n"));
state->mode = TYPE;
break;
case TABLE:
NEEDBITS(14);
state->nlen = BITS(5) + 257;
DROPBITS(5);
state->ndist = BITS(5) + 1;
DROPBITS(5);
state->ncode = BITS(4) + 4;
DROPBITS(4);
#ifndef PKZIP_BUG_WORKAROUND
if (state->nlen > 286 || state->ndist > 30) {
strm->msg = (char *)"too many length or distance symbols";
state->mode = BAD;
break;
}
#endif
Tracev((stderr, "inflate: table sizes ok\n"));
state->have = 0;
state->mode = LENLENS;
case LENLENS:
while (state->have < state->ncode) {
NEEDBITS(3);
state->lens[order[state->have++]] = (unsigned short)BITS(3);
DROPBITS(3);
}
while (state->have < 19)
state->lens[order[state->have++]] = 0;
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 7;
ret = inflate_table(CODES, state->lens, 19, &(state->next),
&(state->lenbits), state->work);
if (ret) {
strm->msg = (char *)"invalid code lengths set";
state->mode = BAD;
break;
}
Tracev((stderr, "inflate: code lengths ok\n"));
state->have = 0;
state->mode = CODELENS;
case CODELENS:
while (state->have < state->nlen + state->ndist) {
for (;;) {
this = state->lencode[BITS(state->lenbits)];
if ((unsigned)(this.bits) <= bits) break;
PULLBYTE();
}
if (this.val < 16) {
NEEDBITS(this.bits);
DROPBITS(this.bits);
state->lens[state->have++] = this.val;
}
else {
if (this.val == 16) {
NEEDBITS(this.bits + 2);
DROPBITS(this.bits);
if (state->have == 0) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
break;
}
len = state->lens[state->have - 1];
copy = 3 + BITS(2);
DROPBITS(2);
}
else if (this.val == 17) {
NEEDBITS(this.bits + 3);
DROPBITS(this.bits);
len = 0;
copy = 3 + BITS(3);
DROPBITS(3);
}
else {
NEEDBITS(this.bits + 7);
DROPBITS(this.bits);
len = 0;
copy = 11 + BITS(7);
DROPBITS(7);
}
if (state->have + copy > state->nlen + state->ndist) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
break;
}
while (copy--)
state->lens[state->have++] = (unsigned short)len;
}
}
/* handle error breaks in while */
if (state->mode == BAD) break;
/* build code tables */
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 9;
ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
&(state->lenbits), state->work);
if (ret) {
strm->msg = (char *)"invalid literal/lengths set";
state->mode = BAD;
break;
}
state->distcode = (code const FAR *)(state->next);
state->distbits = 6;
ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
&(state->next), &(state->distbits), state->work);
if (ret) {
strm->msg = (char *)"invalid distances set";
state->mode = BAD;
break;
}
Tracev((stderr, "inflate: codes ok\n"));
state->mode = LEN;
case LEN:
WATCHDOG_RESET();
if (have >= 6 && left >= 258) {
RESTORE();
inflate_fast(strm, out);
LOAD();
break;
}
for (;;) {
this = state->lencode[BITS(state->lenbits)];
if ((unsigned)(this.bits) <= bits) break;
PULLBYTE();
}
if (this.op && (this.op & 0xf0) == 0) {
last = this;
for (;;) {
this = state->lencode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
if ((unsigned)(last.bits + this.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
DROPBITS(this.bits);
state->length = (unsigned)this.val;
if ((int)(this.op) == 0) {
Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
"inflate: literal '%c'\n" :
"inflate: literal 0x%02x\n", this.val));
state->mode = LIT;
break;
}
if (this.op & 32) {
Tracevv((stderr, "inflate: end of block\n"));
state->mode = TYPE;
break;
}
if (this.op & 64) {
strm->msg = (char *)"invalid literal/length code";
state->mode = BAD;
break;
}
state->extra = (unsigned)(this.op) & 15;
state->mode = LENEXT;
case LENEXT:
if (state->extra) {
NEEDBITS(state->extra);
state->length += BITS(state->extra);
DROPBITS(state->extra);
}
Tracevv((stderr, "inflate: length %u\n", state->length));
state->mode = DIST;
case DIST:
for (;;) {
this = state->distcode[BITS(state->distbits)];
if ((unsigned)(this.bits) <= bits) break;
PULLBYTE();
}
if ((this.op & 0xf0) == 0) {
last = this;
for (;;) {
this = state->distcode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
if ((unsigned)(last.bits + this.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
DROPBITS(this.bits);
if (this.op & 64) {
strm->msg = (char *)"invalid distance code";
state->mode = BAD;
break;
}
state->offset = (unsigned)this.val;
state->extra = (unsigned)(this.op) & 15;
state->mode = DISTEXT;
case DISTEXT:
if (state->extra) {
NEEDBITS(state->extra);
state->offset += BITS(state->extra);
DROPBITS(state->extra);
}
#ifdef INFLATE_STRICT
if (state->offset > state->dmax) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
break;
}
#endif
if (state->offset > state->whave + out - left) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
break;
}
Tracevv((stderr, "inflate: distance %u\n", state->offset));
state->mode = MATCH;
case MATCH:
if (left == 0) goto inf_leave;
copy = out - left;
if (state->offset > copy) { /* copy from window */
copy = state->offset - copy;
if (copy > state->write) {
copy -= state->write;
from = state->window + (state->wsize - copy);
}
else
from = state->window + (state->write - copy);
if (copy > state->length) copy = state->length;
}
else { /* copy from output */
from = put - state->offset;
copy = state->length;
}
if (copy > left) copy = left;
left -= copy;
state->length -= copy;
do {
*put++ = *from++;
} while (--copy);
if (state->length == 0) state->mode = LEN;
break;
case LIT:
if (left == 0) goto inf_leave;
*put++ = (unsigned char)(state->length);
left--;
state->mode = LEN;
break;
case CHECK:
if (state->wrap) {
NEEDBITS(32);
out -= left;
strm->total_out += out;
state->total += out;
if (out)
strm->adler = state->check =
UPDATE(state->check, put - out, out);
out = left;
if ((
#ifdef GUNZIP
state->flags ? hold :
#endif
REVERSE(hold)) != state->check) {
strm->msg = (char *)"incorrect data check";
state->mode = BAD;
break;
}
INITBITS();
Tracev((stderr, "inflate: check matches trailer\n"));
}
#ifdef GUNZIP
state->mode = LENGTH;
case LENGTH:
if (state->wrap && state->flags) {
NEEDBITS(32);
if (hold != (state->total & 0xffffffffUL)) {
strm->msg = (char *)"incorrect length check";
state->mode = BAD;
break;
}
INITBITS();
Tracev((stderr, "inflate: length matches trailer\n"));
}
#endif
state->mode = DONE;
case DONE:
ret = Z_STREAM_END;
goto inf_leave;
case BAD:
ret = Z_DATA_ERROR;
goto inf_leave;
case MEM:
return Z_MEM_ERROR;
case SYNC:
default:
return Z_STREAM_ERROR;
}
/*
Return from inflate(), updating the total counts and the check value.
If there was no progress during the inflate() call, return a buffer
error. Call updatewindow() to create and/or update the window state.
Note: a memory error from inflate() is non-recoverable.
*/
inf_leave:
RESTORE();
if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
if (updatewindow(strm, out)) {
state->mode = MEM;
return Z_MEM_ERROR;
}
in -= strm->avail_in;
out -= strm->avail_out;
strm->total_in += in;
strm->total_out += out;
state->total += out;
if (state->wrap && out)
strm->adler = state->check =
UPDATE(state->check, strm->next_out - out, out);
strm->data_type = state->bits + (state->last ? 64 : 0) +
(state->mode == TYPE ? 128 : 0);
if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
ret = Z_BUF_ERROR;
return ret;
}
lib/zlib: sparse fixes define Z_NULL to (void *)0 include/u-boot/zlib.h to get rid of most of the NULL pointer warnings. inflate.c:942:1: warning: non-ANSI definition of function 'inflateEnd' inflate.c:9:1: warning: non-ANSI definition of function 'inflateReset' inflate.c:12:17: warning: Using plain integer as NULL pointer inflate.c:12:42: warning: Using plain integer as NULL pointer inflate.c:15:17: warning: Using plain integer as NULL pointer inflate.c:21:19: warning: Using plain integer as NULL pointer inflate.c:35:1: warning: non-ANSI definition of function 'inflateInit2_' inflate.c:38:20: warning: Using plain integer as NULL pointer inflate.c:41:17: warning: Using plain integer as NULL pointer inflate.c:42:17: warning: Using plain integer as NULL pointer inflate.c:50:18: warning: Using plain integer as NULL pointer inflate.c:65:23: warning: Using plain integer as NULL pointer inflate.c:69:21: warning: Using plain integer as NULL pointer inflate.c:78:1: warning: non-ANSI definition of function 'inflateInit_' inflate.c:86:1: warning: non-ANSI definition of function 'fixedtables' inflate.c:108:26: warning: Using plain integer as NULL pointer inflate.c:109:1: warning: non-ANSI definition of function 'updatewindow' inflate.c:112:30: warning: Using plain integer as NULL pointer inflate.c:339:1: warning: non-ANSI definition of function 'inflate' inflate.c:349:17: warning: Using plain integer as NULL pointer inflate.c:349:42: warning: Using plain integer as NULL pointer inflate.c:350:27: warning: Using plain integer as NULL pointer inflate.c:369:42: warning: Using plain integer as NULL pointer inflate.c:376:32: warning: Using plain integer as NULL pointer inflate.c:401:54: warning: Using plain integer as NULL pointer inflate.c:419:32: warning: Using plain integer as NULL pointer inflate.c:426:32: warning: Using plain integer as NULL pointer inflate.c:433:32: warning: Using plain integer as NULL pointer inflate.c:444:36: warning: Using plain integer as NULL pointer inflate.c:449:37: warning: Using plain integer as NULL pointer inflate.c:450:38: warning: Using plain integer as NULL pointer inflate.c:457:40: warning: Using plain integer as NULL pointer inflate.c:458:47: warning: Using plain integer as NULL pointer inflate.c:480:40: warning: Using plain integer as NULL pointer inflate.c:481:50: warning: Using plain integer as NULL pointer inflate.c:491:37: warning: Using plain integer as NULL pointer inflate.c:492:37: warning: Using plain integer as NULL pointer inflate.c:501:40: warning: Using plain integer as NULL pointer inflate.c:502:53: warning: Using plain integer as NULL pointer inflate.c:512:37: warning: Using plain integer as NULL pointer inflate.c:513:40: warning: Using plain integer as NULL pointer inflate.c:525:32: warning: Using plain integer as NULL pointer inflate.c:529:52: warning: Using plain integer as NULL pointer inflate.c:543:54: warning: Using plain integer as NULL pointer inflate.c:932:17: warning: Using plain integer as NULL pointer inflate.c:932:42: warning: Using plain integer as NULL pointer inflate.c:935:26: warning: Using plain integer as NULL pointer inflate.c:940:19: warning: Using plain integer as NULL pointer adler32.c:58:5: warning: non-ANSI definition of function 'adler32' adler32.c:81:16: warning: Using plain integer as NULL pointer zutil.c:53:9: warning: non-ANSI definition of function 'zcalloc' zutil.c:64:9: warning: non-ANSI definition of function 'zcfree' inffast.c:70:1: warning: non-ANSI definition of function 'inflate_fast' inftrees.c:33:1: warning: non-ANSI definition of function 'inflate_table' Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years ago
int ZEXPORT inflateEnd(z_streamp strm)
{
struct inflate_state FAR *state;
if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
if (state->window != Z_NULL) {
WATCHDOG_RESET();
ZFREE(strm, state->window);
}
ZFREE(strm, strm->state);
strm->state = Z_NULL;
Tracev((stderr, "inflate: end\n"));
return Z_OK;
}