upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
45 lines
1.9 KiB
45 lines
1.9 KiB
12 years ago
|
How to enable PMECC(Programmable Multibit ECC) for nand on Atmel SoCs
|
||
|
|
-----------------------------------------------------------
|
||
|
|
2012-08-22 Josh Wu <josh.wu@atmel.com>
|
||
|
|
|
||
|
|
The Programmable Multibit ECC (PMECC) controller is a programmable binary
|
||
|
|
BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller
|
||
|
|
can be used to support both SLC and MLC NAND Flash devices. It supports to
|
||
|
|
generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector (512 or
|
||
|
|
1024 bytes) of data.
|
||
|
|
|
||
|
|
Following Atmel AT91 products support PMECC.
|
||
|
|
- AT91SAM9X25, X35, G25, G15, G35 (tested)
|
||
|
|
- AT91SAM9N12 (not tested, Should work)
|
||
|
|
|
||
|
|
As soon as your nand flash software ECC works, you can enable PMECC.
|
||
|
|
|
||
|
|
To use PMECC in this driver, the user needs to set:
|
||
|
|
1. the PMECC correction error bits capability: CONFIG_PMECC_CAP.
|
||
|
|
It can be 2, 4, 8, 12 or 24.
|
||
|
|
2. The PMECC sector size: CONFIG_PMECC_SECTOR_SIZE.
|
||
|
|
It only can be 512 or 1024.
|
||
|
|
3. The PMECC index lookup table's offsets in ROM code: CONFIG_PMECC_INDEX_TABLE_OFFSET.
|
||
|
|
In the chip datasheet section "Boot Stragegies", you can find
|
||
|
|
two Galois Field Table in the ROM code. One table is for 512-bytes
|
||
|
|
sector. Another is for 1024-byte sector. Each Galois Field includes
|
||
|
|
two sub-table: indext table & alpha table.
|
||
|
|
In the beginning of each Galois Field Table is the index table,
|
||
|
|
Alpha table is in the following.
|
||
|
|
So the index table's offset is same as the Galois Field Table.
|
||
|
|
|
||
|
|
Please set CONFIG_PMECC_INDEX_TABLE_OFFSET correctly according the
|
||
|
|
Galois Field Table's offset base on the sector size you used.
|
||
|
|
|
||
|
|
Take AT91SAM9X5EK as an example, the board definition file likes:
|
||
|
|
|
||
|
|
/* PMECC & PMERRLOC */
|
||
|
|
#define CONFIG_ATMEL_NAND_HWECC 1
|
||
|
|
#define CONFIG_ATMEL_NAND_HW_PMECC 1
|
||
|
|
#define CONFIG_PMECC_CAP 2
|
||
|
|
#define CONFIG_PMECC_SECTOR_SIZE 512
|
||
|
|
#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
|
||
|
|
|
||
|
|
NOTE: If you use 1024 as the sector size, then need set 0x10000 as the
|
||
|
|
CONFIG_PMECC_INDEX_TABLE_OFFSET
|