Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52362 Commits
3 Branches
0 Tags
148 MiB
Tag: Branch: Tree: d13f5b254a
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'd13f5b254a'
${ noResults }
u-boot/board/freescale/common/vsc3316_3308.c

276 lines
7.5 KiB
Raw Normal View History Unescape

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
7 years ago
// SPDX-License-Identifier: GPL-2.0+
board/freescale/common: VSC3316/VSC3308 initialization code Add code for configuring VSC3316/3308 crosspoint switches Add README to understand the APIs - VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years ago
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*/
#include "vsc3316_3308.h"
#define REVISION_ID_REG 0x7E
#define INTERFACE_MODE_REG 0x79
#define CURRENT_PAGE_REGISTER 0x7F
#define CONNECTION_CONFIG_PAGE 0x00
#define INPUT_STATE_REG 0x13
#define GLOBAL_INPUT_ISE1 0x51
#define GLOBAL_INPUT_ISE2 0x52
powerpc/b4860qds: add workaround for XFI XFI does not work stable on current board, it's due to heat sink issue, to make it work stable the board needs additional heat sink, enable two XFI lanes only. Right now we do not have such an erratum for the issue, so use a define CONFIG_SYS_FSL_B4860QDS_XFI_ERR to identify it. The workaround will only be used in XFI protocols and only if the hwconfig indicates that XFI is prefered. A new VSC3308 config function is used instead of re-use the original function, to avoid making the function complex and ugly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
10 years ago
#define GLOBAL_INPUT_GAIN 0x53
board/freescale/common: VSC3316/VSC3308 initialization code Add code for configuring VSC3316/3308 crosspoint switches Add README to understand the APIs - VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years ago
#define GLOBAL_INPUT_LOS 0x55
powerpc/b4860qds: add workaround for XFI XFI does not work stable on current board, it's due to heat sink issue, to make it work stable the board needs additional heat sink, enable two XFI lanes only. Right now we do not have such an erratum for the issue, so use a define CONFIG_SYS_FSL_B4860QDS_XFI_ERR to identify it. The workaround will only be used in XFI protocols and only if the hwconfig indicates that XFI is prefered. A new VSC3308 config function is used instead of re-use the original function, to avoid making the function complex and ugly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
10 years ago
#define GLOBAL_OUTPUT_PE1 0x56
#define GLOBAL_OUTPUT_PE2 0x57
#define GLOBAL_OUTPUT_LEVEL 0x58
#define GLOBAL_OUTPUT_TERMINATION 0x5A
board/freescale/common: VSC3316/VSC3308 initialization code Add code for configuring VSC3316/3308 crosspoint switches Add README to understand the APIs - VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years ago
#define GLOBAL_CORE_CNTRL 0x5D
#define OUTPUT_MODE_PAGE 0x23
#define CORE_CONTROL_PAGE 0x25
#define CORE_CONFIG_REG 0x75
int vsc_if_enable(unsigned int vsc_addr)
{
u8 data;
debug("VSC:Configuring VSC at I2C address 0x%2x"
" for 2-wire interface\n", vsc_addr);
/* enable 2-wire Serial InterFace (I2C) */
data = 0x02;
return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
}
powerpc/common/vsc3316: remove const from vsc3316_config parameter define Since the parameters need to be modified according to different Serdes protocols at runtime, the const will block this. Also remove const from arrays define used by vsc3316_config. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
11 years ago
int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
board/freescale/common: VSC3316/VSC3308 initialization code Add code for configuring VSC3316/3308 crosspoint switches Add README to understand the APIs - VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years ago
unsigned int num_con)
{
unsigned int i;
u8 rev_id = 0;
int ret;
debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
" for Tx\n", vsc_addr);
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
vsc_addr);
return ret;
}
if (rev_id != 0xab) {
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
vsc_addr);
return -ENODEV;
}
ret = vsc_if_enable(vsc_addr);
if (ret) {
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
vsc_addr);
return ret;
}
/* config connections - page 0x00 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
/* Making crosspoint connections, by connecting required
* input to output */
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
/* input state - page 0x13 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
/* Configuring the required input of the switch */
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
/* Setting Global Input LOS threshold value */
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
/* config output mode - page 0x23 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
/* Turn ON the Output driver correspond to required output*/
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][1], 0);
/* configure global core control register, Turn on Global core power */
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
vsc_wp_config(vsc_addr);
return 0;
}
powerpc/b4860qds: add workaround for XFI XFI does not work stable on current board, it's due to heat sink issue, to make it work stable the board needs additional heat sink, enable two XFI lanes only. Right now we do not have such an erratum for the issue, so use a define CONFIG_SYS_FSL_B4860QDS_XFI_ERR to identify it. The workaround will only be used in XFI protocols and only if the hwconfig indicates that XFI is prefered. A new VSC3308 config function is used instead of re-use the original function, to avoid making the function complex and ugly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
10 years ago
#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
unsigned int num_con)
{
unsigned int i;
u8 rev_id = 0;
int ret;
debug("VSC:Initializing VSC3308 at I2C address 0x%x for Tx\n",
vsc_addr);
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
vsc_addr);
return ret;
}
if (rev_id != 0xab) {
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
vsc_addr);
return -ENODEV;
}
ret = vsc_if_enable(vsc_addr);
if (ret) {
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
vsc_addr);
return ret;
}
/* config connections - page 0x00 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
/* Configure Global Input ISE */
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0);
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0);
/* Configure Tx/Rx Global Output PE1 */
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE1, 0);
/* Configure Tx/Rx Global Output PE2 */
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE2, 0);
/* Configure Tx/Rx Global Input GAIN */
i2c_reg_write(vsc_addr, GLOBAL_INPUT_GAIN, 0x3F);
/* Setting Global Input LOS threshold value */
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0xE0);
/* Setting Global output termination */
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_TERMINATION, 0);
/* Configure Tx/Rx Global Output level */
if (vsc_addr == VSC3308_TX_ADDRESS)
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 4);
else
i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 2);
/* Making crosspoint connections, by connecting required
* input to output */
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
/* input state - page 0x13 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
/* Turning off all the required input of the switch */
for (i = 0; i < num_con; i++)
i2c_reg_write(vsc_addr, con_arr[i][0], 1);
/* only turn on specific Tx/Rx requested by the XFI erratum */
if (vsc_addr == VSC3308_TX_ADDRESS) {
i2c_reg_write(vsc_addr, 2, 0);
i2c_reg_write(vsc_addr, 3, 0);
} else {
i2c_reg_write(vsc_addr, 0, 0);
i2c_reg_write(vsc_addr, 1, 0);
}
/* config output mode - page 0x23 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
/* Turn off the Output driver correspond to required output*/
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][1], 1);
/* only turn on specific Tx/Rx requested by the XFI erratum */
if (vsc_addr == VSC3308_TX_ADDRESS) {
i2c_reg_write(vsc_addr, 0, 0);
i2c_reg_write(vsc_addr, 1, 0);
} else {
i2c_reg_write(vsc_addr, 3, 0);
i2c_reg_write(vsc_addr, 4, 0);
}
/* configure global core control register, Turn on Global core power */
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
vsc_wp_config(vsc_addr);
return 0;
}
#endif
board/freescale/common: VSC3316/VSC3308 initialization code Add code for configuring VSC3316/3308 crosspoint switches Add README to understand the APIs - VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
12 years ago
int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
unsigned int num_con)
{
unsigned int i;
u8 rev_id = 0;
int ret;
debug("VSC:Initializing VSC3308 at I2C address 0x%x"
" for Tx\n", vsc_addr);
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
vsc_addr);
return ret;
}
if (rev_id != 0xab) {
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
vsc_addr);
return -ENODEV;
}
ret = vsc_if_enable(vsc_addr);
if (ret) {
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
vsc_addr);
return ret;
}
/* config connections - page 0x00 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
/* Making crosspoint connections, by connecting required
* input to output */
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
/*Configure Global Input ISE and gain */
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
/* input state - page 0x13 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
/* Turning ON the required input of the switch */
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][0], 0);
/* Setting Global Input LOS threshold value */
i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
/* config output mode - page 0x23 */
i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
/* Turn ON the Output driver correspond to required output*/
for (i = 0; i < num_con ; i++)
i2c_reg_write(vsc_addr, con_arr[i][1], 0);
/* configure global core control register, Turn on Global core power */
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
vsc_wp_config(vsc_addr);
return 0;
}
void vsc_wp_config(unsigned int vsc_addr)
{
debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr);
/* For new crosspoint configuration to occur, WP bit of
* CORE_CONFIG_REG should be set 1 and then reset to 0 */
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
}