upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
23 lines
942 B
23 lines
942 B
18 years ago
|
Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM)
|
||
|
|
----------------------------------------------------------
|
||
|
|
|
||
|
|
Low-power mode as described in Lite5200B User's Manual, means that
|
||
|
|
with support of MC68HLC908QT1 microcontroller (refered to as QT),
|
||
|
|
everything but the SDRAM can be powered down. This brings
|
||
|
|
maximum power saving, while one can still restore previous state
|
||
|
|
quickly.
|
||
|
|
|
||
|
|
Quick overview where U-Boot comes into the picture:
|
||
|
|
- OS saves device states
|
||
|
|
- OS saves wakeup handler address to physical 0x0, puts SDRAM into
|
||
|
|
self-refresh and signals to QT, it should power down the board
|
||
|
|
- / board is sleeping here /
|
||
|
|
- someone presses SW4 (connected to QT)
|
||
|
|
- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up,
|
||
|
|
so get SDRAM out of self-refresh and transfer control to OS
|
||
|
|
wakeup handler
|
||
|
|
- OS restores device states
|
||
|
|
|
||
|
|
This was tested on Linux with USB and Ethernet in use. Adding
|
||
|
|
support for other devices is an OS issue.
|