upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/powerpc/cpu/mpc85xx/mp.c

416 lines
9.8 KiB

/*
* Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <ioports.h>
#include <lmb.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
u32 get_my_id()
{
return mfspr(SPRN_PIR);
}
/*
* Determine if U-Boot should keep secondary cores in reset, or let them out
* of reset and hold them in a spinloop
*/
int hold_cores_in_reset(int verbose)
{
const char *s = getenv("mp_holdoff");
/* Default to no, overriden by 'y', 'yes', 'Y', 'Yes', or '1' */
if (s && (*s == 'y' || *s == 'Y' || *s == '1')) {
if (verbose) {
puts("Secondary cores are being held in reset.\n");
puts("See 'mp_holdoff' environment variable\n");
}
return 1;
}
return 0;
}
int cpu_reset(int nr)
{
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
out_be32(&pic->pir, 1 << nr);
/* the dummy read works around an errata on early 85xx MP PICs */
(void)in_be32(&pic->pir);
out_be32(&pic->pir, 0x0);
return 0;
}
int cpu_status(int nr)
{
u32 *table, id = get_my_id();
if (hold_cores_in_reset(1))
return 0;
if (nr == id) {
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
table = (u32 *)get_spin_virt_addr();
printf("table base @ 0x%p\n", table);
} else {
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
printf("\n");
printf("table @ 0x%p\n", table);
printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
}
return 0;
}
#ifdef CONFIG_FSL_CORENET
int cpu_disable(int nr)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
setbits_be32(&gur->coredisrl, 1 << nr);
return 0;
}
int is_core_disabled(int nr) {
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 coredisrl = in_be32(&gur->coredisrl);
return (coredisrl & (1 << nr));
}
#else
int cpu_disable(int nr)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
switch (nr) {
case 0:
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU0);
break;
case 1:
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU1);
break;
default:
printf("Invalid cpu number for disable %d\n", nr);
return 1;
}
return 0;
}
int is_core_disabled(int nr) {
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 devdisr = in_be32(&gur->devdisr);
switch (nr) {
case 0:
return (devdisr & MPC85xx_DEVDISR_CPU0);
case 1:
return (devdisr & MPC85xx_DEVDISR_CPU1);
default:
printf("Invalid cpu number for disable %d\n", nr);
}
return 0;
}
#endif
static u8 boot_entry_map[4] = {
0,
BOOT_ENTRY_PIR,
BOOT_ENTRY_R3_LOWER,
BOOT_ENTRY_R6_LOWER,
};
int cpu_release(int nr, int argc, char * const argv[])
{
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
u64 boot_addr;
if (hold_cores_in_reset(1))
return 0;
if (nr == get_my_id()) {
printf("Invalid to release the boot core.\n\n");
return 1;
}
if (argc != 4) {
printf("Invalid number of arguments to release.\n\n");
return 1;
}
boot_addr = simple_strtoull(argv[0], NULL, 16);
/* handle pir, r3, r6 */
for (i = 1; i < 4; i++) {
if (argv[i][0] != '-') {
u8 entry = boot_entry_map[i];
val = simple_strtoul(argv[i], NULL, 16);
table[entry] = val;
}
}
table[BOOT_ENTRY_ADDR_UPPER] = (u32)(boot_addr >> 32);
/* ensure all table updates complete before final address write */
eieio();
table[BOOT_ENTRY_ADDR_LOWER] = (u32)(boot_addr & 0xffffffff);
return 0;
}
u32 determine_mp_bootpg(void)
{
/* if we have 4G or more of memory, put the boot page at 4Gb-4k */
if ((u64)gd->ram_size > 0xfffff000)
return (0xfffff000);
return (gd->ram_size - 4096);
}
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
ulong get_spin_phys_addr(void)
{
extern ulong __secondary_start_page;
extern ulong __spin_table;
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
return (determine_mp_bootpg() +
(ulong)&__spin_table - (ulong)&__secondary_start_page);
}
ulong get_spin_virt_addr(void)
{
extern ulong __secondary_start_page;
extern ulong __spin_table;
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
return (CONFIG_BPTR_VIRT_ADDR +
(ulong)&__spin_table - (ulong)&__secondary_start_page);
}
#ifdef CONFIG_FSL_CORENET
static void plat_mp_up(unsigned long bootpg)
{
u32 cpu_up_mask, whoami;
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
u32 *table = (u32 *)get_spin_virt_addr();
volatile ccsr_gur_t *gur;
volatile ccsr_local_t *ccm;
volatile ccsr_rcpm_t *rcpm;
volatile ccsr_pic_t *pic;
int timeout = 10;
u32 mask = cpu_mask();
struct law_entry e;
gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
whoami = in_be32(&pic->whoami);
cpu_up_mask = 1 << whoami;
out_be32(&ccm->bstrl, bootpg);
e = find_law(bootpg);
out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
/* readback to sync write */
in_be32(&ccm->bstrar);
/* disable time base at the platform */
out_be32(&rcpm->ctbenrl, cpu_up_mask);
out_be32(&gur->brrl, mask);
/* wait for everyone */
while (timeout) {
unsigned int i, cpu, nr_cpus = cpu_numcores();
for_each_cpu(i, cpu, nr_cpus, mask) {
if (table[cpu * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
cpu_up_mask |= (1 << cpu);
}
if ((cpu_up_mask & mask) == mask)
break;
udelay(100);
timeout--;
}
if (timeout == 0)
printf("CPU up timeout. CPU up mask is %x should be %x\n",
cpu_up_mask, mask);
/* enable time base at the platform */
out_be32(&rcpm->ctbenrl, 0);
/* readback to sync write */
in_be32(&rcpm->ctbenrl);
mtspr(SPRN_TBWU, 0);
mtspr(SPRN_TBWL, 0);
out_be32(&rcpm->ctbenrl, mask);
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
/*
* Disabling Boot Page Translation allows the memory region 0xfffff000
* to 0xffffffff to be used normally. Leaving Boot Page Translation
* enabled remaps 0xfffff000 to SDRAM which makes that memory region
* unusable for normal operation but it does allow OSes to easily
* reset a processor core to put it back into U-Boot's spinloop.
*/
clrbits_be32(&ccm->bstrar, LAW_EN);
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
#endif
}
#else
static void plat_mp_up(unsigned long bootpg)
{
u32 up, cpu_up_mask, whoami;
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
u32 *table = (u32 *)get_spin_virt_addr();
volatile u32 bpcr;
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
u32 devdisr;
int timeout = 10;
whoami = in_be32(&pic->whoami);
out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12));
/* disable time base at the platform */
devdisr = in_be32(&gur->devdisr);
if (whoami)
devdisr |= MPC85xx_DEVDISR_TB0;
else
devdisr |= MPC85xx_DEVDISR_TB1;
out_be32(&gur->devdisr, devdisr);
/* release the hounds */
up = ((1 << cpu_numcores()) - 1);
bpcr = in_be32(&ecm->eebpcr);
bpcr |= (up << 24);
out_be32(&ecm->eebpcr, bpcr);
asm("sync; isync; msync");
cpu_up_mask = 1 << whoami;
/* wait for everyone */
while (timeout) {
int i;
for (i = 0; i < cpu_numcores(); i++) {
if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
cpu_up_mask |= (1 << i);
};
if ((cpu_up_mask & up) == up)
break;
udelay(100);
timeout--;
}
if (timeout == 0)
printf("CPU up timeout. CPU up mask is %x should be %x\n",
cpu_up_mask, up);
/* enable time base at the platform */
if (whoami)
devdisr |= MPC85xx_DEVDISR_TB1;
else
devdisr |= MPC85xx_DEVDISR_TB0;
out_be32(&gur->devdisr, devdisr);
/* readback to sync write */
in_be32(&gur->devdisr);
mtspr(SPRN_TBWU, 0);
mtspr(SPRN_TBWL, 0);
devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
out_be32(&gur->devdisr, devdisr);
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
/*
* Disabling Boot Page Translation allows the memory region 0xfffff000
* to 0xffffffff to be used normally. Leaving Boot Page Translation
* enabled remaps 0xfffff000 to SDRAM which makes that memory region
* unusable for normal operation but it does allow OSes to easily
* reset a processor core to put it back into U-Boot's spinloop.
*/
clrbits_be32(&ecm->bptr, 0x80000000);
#endif
}
#endif
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
u32 bootpg = determine_mp_bootpg();
lmb_reserve(lmb, bootpg, 4096);
}
void setup_mp(void)
{
extern ulong __secondary_start_page;
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
extern ulong __bootpg_addr;
ulong fixup = (ulong)&__secondary_start_page;
u32 bootpg = determine_mp_bootpg();
/* Some OSes expect secondary cores to be held in reset */
if (hold_cores_in_reset(0))
return;
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
/* Store the bootpg's SDRAM address for use by secondary CPU cores */
__bootpg_addr = bootpg;
/* look for the tlb covering the reset page, there better be one */
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
/* we found a match */
if (i != -1) {
/* map reset page to bootpg so we can copy code there */
disable_tlb(i);
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
85xx: MP Boot Page Translation update This change has 3 goals: - Have secondary cores be released into spin loops at their 'true' address in SDRAM. Previously, secondary cores were put into spin loops in the 0xfffffxxx address range which required that boot page translation was always enabled while cores were in their spin loops. - Allow the TLB window that the primary core uses to access the secondary cores boot page to be placed at any address. Previously, a TLB window at 0xfffff000 was always used to access the seconary cores' boot page. This TLB address requirement overlapped with other peripherals on some boards (eg XPedite5370). By default, the boot page TLB will still use the 0xfffffxxx address range, but this can be overridden on a board-by-board basis by defining a custom CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page remains in use while U-Boot executes. Previously it was only temporarily used, then restored to its initial value. - Allow Boot Page Translation to be disabled on bootup. Previously, Boot Page Translation was always left enabled after secondary cores were brought out of reset. This caused the 0xfffffxxx address range to somewhat "magically" be translated to an address in SDRAM. Some boards may not want this oddity in their memory map, so defining CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after the secondary cores are initialized. These changes are only applicable to 85xx boards with CONFIG_MP defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15 years ago
memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
plat_mp_up(bootpg);
} else {
puts("WARNING: No reset page TLB. "
"Skipping secondary core setup\n");
}
}