upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
92 lines
3.0 KiB
92 lines
3.0 KiB
11 years ago
|
Android Fastboot
|
||
|
|
~~~~~~~~~~~~~~~~
|
||
|
|
|
||
|
|
Overview
|
||
|
|
========
|
||
|
|
The protocol that is used over USB is described in
|
||
|
|
README.android-fastboot-protocol in same directory.
|
||
|
|
|
||
|
|
The current implementation does not yet support the flash and erase
|
||
|
|
commands.
|
||
|
|
|
||
|
|
Client installation
|
||
|
|
===================
|
||
|
|
The counterpart to this gadget is the fastboot client which can
|
||
|
|
be found in Android's platform/system/core repository in the fastboot
|
||
|
|
folder. It runs on Windows, Linux and even OSX. Linux user are lucky since
|
||
|
|
they only need libusb.
|
||
|
|
Windows users need to bring some time until they have Android SDK (currently
|
||
|
|
http://dl.google.com/android/installer_r12-windows.exe) installed. You
|
||
|
|
need to install ADB package which contains the required glue libraries for
|
||
|
|
accessing USB. Also you need "Google USB driver package" and "SDK platform
|
||
|
|
tools". Once installed the usb driver is placed in your SDK folder under
|
||
|
|
extras\google\usb_driver. The android_winusb.inf needs a line like
|
||
|
|
|
||
|
|
%SingleBootLoaderInterface% = USB_Install, USB\VID_0451&PID_D022
|
||
|
|
|
||
|
|
either in the [Google.NTx86] section for 32bit Windows or [Google.NTamd64]
|
||
|
|
for 64bit Windows. VID and PID should match whatever the fastboot is
|
||
|
|
advertising.
|
||
|
|
|
||
|
|
Board specific
|
||
|
|
==============
|
||
|
|
The fastboot gadget relies on the USB download gadget, so the following
|
||
|
|
options must be configured:
|
||
|
|
|
||
|
|
CONFIG_USBDOWNLOAD_GADGET
|
||
|
|
CONFIG_G_DNL_VENDOR_NUM
|
||
|
|
CONFIG_G_DNL_PRODUCT_NUM
|
||
|
|
CONFIG_G_DNL_MANUFACTURER
|
||
|
|
|
||
|
|
The fastboot function is enabled by defining CONFIG_CMD_FASTBOOT and
|
||
|
|
CONFIG_ANDROID_BOOT_IMAGE.
|
||
|
|
|
||
|
|
The fastboot protocol requires a large memory buffer for downloads. This
|
||
|
|
buffer should be as large as possible for a platform. The location of the
|
||
|
|
buffer and size are set with CONFIG_USB_FASTBOOT_BUF_ADDR and
|
||
|
|
CONFIG_USB_FASTBOOT_BUF_SIZE.
|
||
|
|
|
||
|
|
In Action
|
||
|
|
=========
|
||
|
|
Enter into fastboot by executing the fastboot command in u-boot and you
|
||
|
|
should see:
|
||
|
|
|GADGET DRIVER: usb_dnl_fastboot
|
||
|
|
|
||
|
|
On the client side you can fetch the bootloader version for instance:
|
||
|
|
|>fastboot getvar bootloader-version
|
||
|
|
|bootloader-version: U-Boot 2014.04-00005-gd24cabc
|
||
|
|
|finished. total time: 0.000s
|
||
|
|
|
||
|
|
or initiate a reboot:
|
||
|
|
|>fastboot reboot
|
||
|
|
|
||
|
|
and once the client comes back, the board should reset.
|
||
|
|
|
||
|
|
You can also specify a kernel image to boot. You have to either specify
|
||
|
|
the an image in Android format _or_ pass a binary kernel and let the
|
||
|
|
fastboot client wrap the Android suite around it. On OMAP for instance you
|
||
|
|
take zImage kernel and pass it to the fastboot client:
|
||
|
|
|
||
|
|
|>fastboot -b 0x80000000 -c "console=ttyO2 earlyprintk root=/dev/ram0
|
||
|
|
| mem=128M" boot zImage
|
||
|
|
|creating boot image...
|
||
|
|
|creating boot image - 1847296 bytes
|
||
|
|
|downloading 'boot.img'...
|
||
|
|
|OKAY [ 2.766s]
|
||
|
|
|booting...
|
||
|
|
|OKAY [ -0.000s]
|
||
|
|
|finished. total time: 2.766s
|
||
|
|
|
||
|
|
and on the gadget side you should see:
|
||
|
|
|Starting download of 1847296 bytes
|
||
|
|
|........................................................
|
||
|
|
|downloading of 1847296 bytes finished
|
||
|
|
|Booting kernel..
|
||
|
|
|## Booting Android Image at 0x81000000 ...
|
||
|
|
|Kernel load addr 0x80008000 size 1801 KiB
|
||
|
|
|Kernel command line: console=ttyO2 earlyprintk root=/dev/ram0 mem=128M
|
||
|
|
| Loading Kernel Image ... OK
|
||
|
|
|OK
|
||
|
|
|
|
||
|
|
|Starting kernel ...
|