upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/amcc/luan/luan.c

240 lines
6.7 KiB

/*
* (C) Copyright 2005
* John Otken, jotken@softadvances.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
#include <asm/ppc4xx-isram.h>
#include <spd_sdram.h>
#include "epld.h"
DECLARE_GLOBAL_DATA_PTR;
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*************************************************************************
* int board_early_init_f()
*
************************************************************************/
int board_early_init_f(void)
{
ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by setting the FIXD bit in the SDR0_MFR register. Here a description of the symptoms: Problem Description ------------------------------ If a DMA is performed between memory and PCI with the DMA 1 Controller using prefetch, and as a result uses a special purpose buffer selected by the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29), the first part of the transfer sequence is performed twice. The PPC440SPe PCI Controller requests more data than was needed such that in the case of enforce memory protection, a host CPU exception can occur. No data is corrupted, because data transfer is stopped in the PCI Controller. Prefetch enable is specified by setting DMA Configuration Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0. Behavior that may be observed in a running system --------------------------------------------------------------------------- 1. DMA performance is decreased because of the double access on the PCI bus interface. 2. If an illegal access to some address on the PCI bus is detected at the system level, a machine check or similar system error may occur. Workarounds Available ---------------------------------- 1. Do not program prefetch. Note that a prefetch command cannot be programmed without selecting a special purpose buffer. 2. To avoid crossing a physical boundary of the PCI slave device, add 512 bytes of address to the PCI address range. This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com> from AMCC and slighly changed. Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
17 years ago
u32 mfr;
mtebc( PB0AP, 0x03800000 ); /* set chip selects */
mtebc( PB0CR, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
mtebc( PB1AP, 0x03800000 );
mtebc( PB1CR, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */
mtebc( PB2AP, 0x03800000 );
mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */
mtdcr( UIC1SR, 0xffffffff ); /* Clear all interrupts */
mtdcr( UIC1ER, 0x00000000 ); /* disable all interrupts */
mtdcr( UIC1CR, 0x00000000 ); /* Set Critical / Non Critical interrupts */
mtdcr( UIC1PR, 0x7fff83ff ); /* Set Interrupt Polarities */
mtdcr( UIC1TR, 0x001f8000 ); /* Set Interrupt Trigger Levels */
mtdcr( UIC1VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
mtdcr( UIC1SR, 0x00000000 ); /* clear all interrupts */
mtdcr( UIC1SR, 0xffffffff );
mtdcr( UIC0SR, 0xffffffff ); /* Clear all interrupts */
mtdcr( UIC0ER, 0x00000000 ); /* disable all interrupts excepted cascade */
mtdcr( UIC0CR, 0x00000001 ); /* Set Critical / Non Critical interrupts */
mtdcr( UIC0PR, 0xffffffff ); /* Set Interrupt Polarities */
mtdcr( UIC0TR, 0x01000004 ); /* Set Interrupt Trigger Levels */
mtdcr( UIC0VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
mtdcr( UIC0SR, 0x00000000 ); /* clear all interrupts */
mtdcr( UIC0SR, 0xffffffff );
mfsdr(SDR0_MFR, mfr);
ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by setting the FIXD bit in the SDR0_MFR register. Here a description of the symptoms: Problem Description ------------------------------ If a DMA is performed between memory and PCI with the DMA 1 Controller using prefetch, and as a result uses a special purpose buffer selected by the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29), the first part of the transfer sequence is performed twice. The PPC440SPe PCI Controller requests more data than was needed such that in the case of enforce memory protection, a host CPU exception can occur. No data is corrupted, because data transfer is stopped in the PCI Controller. Prefetch enable is specified by setting DMA Configuration Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0. Behavior that may be observed in a running system --------------------------------------------------------------------------- 1. DMA performance is decreased because of the double access on the PCI bus interface. 2. If an illegal access to some address on the PCI bus is detected at the system level, a machine check or similar system error may occur. Workarounds Available ---------------------------------- 1. Do not program prefetch. Note that a prefetch command cannot be programmed without selecting a special purpose buffer. 2. To avoid crossing a physical boundary of the PCI slave device, add 512 bytes of address to the PCI address range. This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com> from AMCC and slighly changed. Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
17 years ago
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
mtsdr(SDR0_MFR, mfr);
ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by setting the FIXD bit in the SDR0_MFR register. Here a description of the symptoms: Problem Description ------------------------------ If a DMA is performed between memory and PCI with the DMA 1 Controller using prefetch, and as a result uses a special purpose buffer selected by the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29), the first part of the transfer sequence is performed twice. The PPC440SPe PCI Controller requests more data than was needed such that in the case of enforce memory protection, a host CPU exception can occur. No data is corrupted, because data transfer is stopped in the PCI Controller. Prefetch enable is specified by setting DMA Configuration Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0. Behavior that may be observed in a running system --------------------------------------------------------------------------- 1. DMA performance is decreased because of the double access on the PCI bus interface. 2. If an illegal access to some address on the PCI bus is detected at the system level, a machine check or similar system error may occur. Workarounds Available ---------------------------------- 1. Do not program prefetch. Note that a prefetch command cannot be programmed without selecting a special purpose buffer. 2. To avoid crossing a physical boundary of the PCI slave device, add 512 bytes of address to the PCI address range. This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com> from AMCC and slighly changed. Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
17 years ago
return 0;
}
/*************************************************************************
* int misc_init_r()
*
************************************************************************/
int misc_init_r(void)
{
volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE;
/* set modes of operation */
x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE;
/* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */
x->ethuart &= ~EPLD2_ETH_AUTO_NEGO;
/* put Ethernet+PHY in reset */
x->ethuart &= ~EPLD2_RESET_ETH_N;
udelay(10000);
/* take Ethernet+PHY out of reset */
x->ethuart |= EPLD2_RESET_ETH_N;
return 0;
}
/*************************************************************************
* int checkboard()
*
************************************************************************/
int checkboard(void)
{
char buf[64];
int i = getenv_f("serial#", buf, sizeof(buf));
printf("Board: Luan - AMCC PPC440SP Evaluation Board");
if (i > 0) {
puts(", serial# ");
puts(buf);
}
putc('\n');
return 0;
}
/*
* Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
u32 ddr_clktr(u32 default_val) {
return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
}
/*************************************************************************
* hw_watchdog_reset
*
* This routine is called to reset (keep alive) the watchdog timer
*
************************************************************************/
#if defined(CONFIG_HW_WATCHDOG)
void hw_watchdog_reset(void)
{
}
#endif
/*************************************************************************
* int on_off()
*
************************************************************************/
static int on_off( const char *s )
{
if (strcmp(s, "on") == 0) {
return 1;
} else if (strcmp(s, "off") == 0) {
return 0;
}
return -1;
}
/*************************************************************************
* void l2cache_disable()
*
************************************************************************/
static void l2cache_disable(void)
{
mtdcr( L2_CACHE_CFG, 0 );
}
/*************************************************************************
* void l2cache_enable()
*
************************************************************************/
static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */
{
mtdcr( L2_CACHE_CFG, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */
mtdcr( L2_CACHE_ADDR, 0 ); /* set L2_ADDR with all zeros */
mtdcr( L2_CACHE_CMD, 0x80000000 ); /* issue HCLEAR command via L2_CMD */
while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 )) ;; /* poll L2_SR for completion */
mtdcr( L2_CACHE_CMD, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */
mtdcr( L2_CACHE_CMD, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */
mtdcr( L2_CACHE_SNP0, 0 ); /* snoop registers */
mtdcr( L2_CACHE_SNP1, 0 );
__asm__ volatile ("sync"); /* msync */
mtdcr( L2_CACHE_CFG, 0xe0000000 ); /* inst and data use L2 */
__asm__ volatile ("sync");
}
/*************************************************************************
* int l2cache_status()
*
************************************************************************/
static int l2cache_status(void)
{
return (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0;
}
/*************************************************************************
* int do_l2cache()
*
************************************************************************/
int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
{
switch (argc) {
case 2: /* on / off */
switch (on_off(argv[1])) {
case 0: l2cache_disable();
break;
case 1: l2cache_enable();
break;
}
/* FALL TROUGH */
case 1: /* get status */
printf ("L2 Cache is %s\n",
l2cache_status() ? "ON" : "OFF");
return 0;
default:
return cmd_usage(cmdtp);
}
return 0;
}
U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
"enable or disable L2 cache",
"[on, off]\n"
" - enable or disable L2 cache"
);