upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/doc/README.bus_vcxk

85 lines
2.5 KiB

/*
* (C) Copyright 2008-2009
* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
* Jens Scharsig <esw@bus-elektronik.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
U-Boot vcxk video controller driver
======================================
By defining CONFIG_VIDEO_VCXK this driver can be used with VC2K, VC4K and
VC8K devices on following boards:
board | ARCH | Vendor
-----------------------------------------------------------------------
EB+CPU5282-T1 | MCF5282 | BuS Elektronik GmbH & Co. KG
EB+MCF-EVB123 | MCF5282 | BuS Elektronik GmbH & Co. KG
EB+CPUx9K2 | AT91RM9200 | BuS Elektronik GmbH & Co. KG
ZLSA | AT91RM9200 | Ruf Telematik AG
Driver configuration
--------------------
The driver needs some defines to describe the target hardware:
CONFIG_SYS_VCXK_BASE
base address of VCxK hardware memory
CONFIG_SYS_VCXK_DEFAULT_LINEALIGN
defines the physical alignment of a pixel row
CONFIG_SYS_VCXK_DOUBLEBUFFERED
some boards that use vcxk prevent read from framebuffer memory.
define this option to enable double buffering (needs 16KiB RAM)
CONFIG_SYS_VCXK_<xxxx>_PIN
defines the number of the I/O line PIN in the port
valid values for <xxxx> are:
ACKNOWLEDGE
describes the acknowledge line from vcxk hardware
ENABLE
describes the enable line to vcxk hardware
INVERT
describes the invert line to vcxk hardware
RESET
describes the reset line to vcxk hardware
REQUEST
describes the request line to vcxk hardware
CONFIG_SYS_VCXK_<xxxx>_PORT
defines the I/O port which is connected with the line
for valid values for <xxxx> see CONFIG_SYS_VCXK_<xxxx>_PIN
CONFIG_SYS_VCXK_<xxxx>_DDR
defines the register which configures the direction
for valid values for <xxxx> see CONFIG_SYS_VCXK_<xxxx>_PIN