upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/include/mpc5xxx_sdma.h

94 lines
3.1 KiB

/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* This file is based on code
* (C) Copyright Motorola, Inc., 2000
*
* odin smartdma header file
*/
#ifndef __MPC5XXX_SDMA_H
#define __MPC5XXX_SDMA_H
#include <common.h>
#include <mpc5xxx.h>
/* Task number assignment */
#define FEC_RECV_TASK_NO 0
#define FEC_XMIT_TASK_NO 1
/*---------------------------------------------------------------------*/
/* Stuff for Ethernet Tx/Rx tasks */
/*---------------------------------------------------------------------*/
/* Layout of Ethernet controller Parameter SRAM area:
----------------------------------------------------------------
0x00: TBD_BASE, base address of TX BD ring
0x04: TBD_NEXT, address of next TX BD to be processed
0x08: RBD_BASE, base address of RX BD ring
0x0C: RBD_NEXT, address of next RX BD to be processed
---------------------------------------------------------------
ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH).
*/
/* base address of SRAM area to store parameters used by Ethernet tasks */
#define FEC_PARAM_BASE (MPC5XXX_SRAM + 0x0800)
/* base address of SRAM area for buffer descriptors */
#define FEC_BD_BASE (MPC5XXX_SRAM + 0x0820)
/*---------------------------------------------------------------------*/
/* common shortcuts used by driver C code */
/*---------------------------------------------------------------------*/
/* Disable SmartDMA task */
#define SDMA_TASK_DISABLE(tasknum) \
{ \
volatile ushort *tcr = (ushort *)(MPC5XXX_SDMA + 0x0000001c + 2 * tasknum); \
*tcr = (*tcr) & (~0x8000); \
}
/* Enable SmartDMA task */
#define SDMA_TASK_ENABLE(tasknum) \
{ \
volatile ushort *tcr = (ushort *) (MPC5XXX_SDMA + 0x0000001c + 2 * tasknum); \
*tcr = (*tcr) | 0x8000; \
}
/* Enable interrupt */
#define SDMA_INT_ENABLE(tasknum) \
{ \
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \
sdma->IntMask &= ~(1 << tasknum); \
}
/* Disable interrupt */
#define SDMA_INT_DISABLE(tasknum) \
{ \
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \
sdma->IntMask |= (1 << tasknum); \
}
/* Clear interrupt pending bits */
#define SDMA_CLEAR_IEVENT(tasknum) \
{ \
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \
sdma->IntPend = (1 << tasknum); \
}
/* get interrupt pending bit of a task */
#define SDMA_GET_PENDINGBIT(tasknum) \
((*(vu_long *)(MPC5XXX_SDMA + 0x14)) & (1<<(tasknum)))
/* get interrupt mask bit of a task */
#define SDMA_GET_MASKBIT(tasknum) \
((*(vu_long *)(MPC5XXX_SDMA + 0x18)) & (1<<(tasknum)))
#endif /* __MPC5XXX_SDMA_H */