upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/netstal/common/fixed_sdram.c

106 lines
2.8 KiB

/*
*(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* This source code is free software; you can redistribute it
* and/or modify it in source code form under the terms of the GNU
* General Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*/
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#include "nm.h"
#if defined(DEBUG)
void show_sdram_registers(void)
{
u32 value;
printf("SDRAM Controller Registers --\n");
mfsdram(mem_mcopt1, value);
printf(" SDRAM0_CFG : 0x%08x\n", value);
mfsdram(mem_status, value);
printf(" SDRAM0_STATUS: 0x%08x\n", value);
mfsdram(mem_mb0cf, value);
printf(" SDRAM0_B0CR : 0x%08x\n", value);
mfsdram(mem_mb1cf, value);
printf(" SDRAM0_B1CR : 0x%08x\n", value);
mfsdram(mem_sdtr1, value);
printf(" SDRAM0_TR : 0x%08x\n", value);
mfsdram(mem_rtr, value);
printf(" SDRAM0_RTR : 0x%08x\n", value);
}
#endif
long int init_ppc405_sdram(unsigned int dram_size)
{
#ifdef DEBUG
printf(__FUNCTION__);
#endif
/* disable memory controller */
mtsdram(mem_mcopt1, 0x00000000);
udelay (500);
/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
mtsdram(mem_besra, 0xffffffff);
/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
mtsdram(mem_besrb, 0xffffffff);
/* Clear SDRAM0_ECCCFG (disable ECC) */
mtsdram(mem_ecccf, 0x00000000);
/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
mtsdram(mem_eccerr, 0xffffffff);
/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
*/
mtsdram(mem_sdtr1, 0x008a4015);
/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
* and refresh timer
*/
switch (dram_size >> 20) {
case 32:
mtsdram(mem_mb0cf, 0x00062001);
mtsdram(mem_rtr, 0x07F00000);
break;
case 64:
mtsdram(mem_mb0cf, 0x00084001);
mtsdram(mem_rtr, 0x04100000);
break;
case 128:
mtsdram(mem_mb0cf, 0x000A4001);
mtsdram(mem_rtr, 0x04100000);
break;
default:
printf("Invalid memory size of %d MB given\n", dram_size >> 20);
}
/* Power management idle timer set to the default. */
mtsdram(mem_pmit, 0x07c00000);
udelay (500);
/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
mtsdram(mem_mcopt1, 0x90800000);
#ifdef DEBUG
printf("%s: done\n", __FUNCTION__);
#endif
return dram_size;
}