upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/include/asm-avr32/arch-at32ap700x/portmux.h

93 lines
3.0 KiB

avr32: refactor the portmux/gpio code - Separate the portmux configuration functionality from the GPIO pin control API. - Separate the controller-specific code from the chip-specific code. - Allow "ganged" port configuration (multiple pins at once). - Add more flexibility to the "canned" peripheral select functions: - Allow using more than 23 address bits, more chip selects, as well as NAND- and CF-specific pins. - Make the MACB SPEED pin optional, and choose between MII/RMII using a parameter instead of an #ifdef. - Make it possible to use other MMC slots than slot 0, and support different MMC/SDCard data bus widths. - Use more reasonable pull-up defaults; floating pins may consume a lot of power. - Get rid of some custom portmux code from the mimc200 board code. The old gpio/portmux API couldn't really handle its requirements, but the new one can. - Add documentation. The end result is slightly smaller code for all boards. Which isn't really the point, but at least it isn't any larger. This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if the board maintainers could help me test this on their boards. In particular, the mimc200 port has lost a lot of code, so I'm hoping Mark can help me out. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Mark Jackson <mpfj@mimc.co.uk> Cc: Alex Raimondi <alex.raimondi@miromico.ch> Cc: Julien May <julien.may@miromico.ch> Changes since v1: * Enable pullup on NWAIT * Add missing include to portmux-pio.h * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
16 years ago
/*
* Copyright (C) 2006, 2008 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_AVR32_ARCH_PORTMUX_H__
#define __ASM_AVR32_ARCH_PORTMUX_H__
#include <asm/arch/gpio.h>
#define PORTMUX_PORT_A ((void *)PIOA_BASE)
#define PORTMUX_PORT_B ((void *)PIOB_BASE)
#define PORTMUX_PORT_C ((void *)PIOC_BASE)
#define PORTMUX_PORT_D ((void *)PIOD_BASE)
#define PORTMUX_PORT_E ((void *)PIOE_BASE)
void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
unsigned long flags, unsigned long drive_strength);
#define PORTMUX_EBI_CS(x) (1 << (x))
#define PORTMUX_EBI_NAND (1 << 6)
#define PORTMUX_EBI_CF(x) (1 << ((x) + 7))
#define PORTMUX_EBI_NWAIT (1 << 9)
#ifdef AT32AP700x_CHIP_HAS_USART
static inline void portmux_enable_usart0(unsigned long drive_strength)
{
portmux_select_peripheral(PORTMUX_PORT_A, (1 << 8) | (1 << 9),
PORTMUX_FUNC_B, 0);
}
static inline void portmux_enable_usart1(unsigned long drive_strength)
{
portmux_select_peripheral(PORTMUX_PORT_A, (1 << 17) | (1 << 18),
PORTMUX_FUNC_A, 0);
}
static inline void portmux_enable_usart2(unsigned long drive_strength)
{
portmux_select_peripheral(PORTMUX_PORT_B, (1 << 26) | (1 << 27),
PORTMUX_FUNC_B, 0);
}
static inline void portmux_enable_usart3(unsigned long drive_strength)
{
portmux_select_peripheral(PORTMUX_PORT_B, (1 << 17) | (1 << 18),
PORTMUX_FUNC_B, 0);
}
#endif
#ifdef AT32AP700x_CHIP_HAS_MACB
void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength);
void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength);
#define PORTMUX_MACB_RMII (0)
#define PORTMUX_MACB_MII (1 << 0)
#define PORTMUX_MACB_SPEED (1 << 1)
#endif
#ifdef AT32AP700x_CHIP_HAS_MMCI
void portmux_enable_mmci(unsigned int slot, unsigned long flags,
unsigned long drive_strength);
#define PORTMUX_MMCI_4BIT (1 << 0)
#define PORTMUX_MMCI_8BIT (PORTMUX_MMCI_4BIT | (1 << 1))
#define PORTMUX_MMCI_EXT_PULLUP (1 << 2)
#endif
#ifdef AT32AP700x_CHIP_HAS_SPI
void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength);
void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength);
#endif
#ifdef AT32AP700x_CHIP_HAS_LCDC
void portmux_enable_lcdc(int pin_config);
#endif
avr32: refactor the portmux/gpio code - Separate the portmux configuration functionality from the GPIO pin control API. - Separate the controller-specific code from the chip-specific code. - Allow "ganged" port configuration (multiple pins at once). - Add more flexibility to the "canned" peripheral select functions: - Allow using more than 23 address bits, more chip selects, as well as NAND- and CF-specific pins. - Make the MACB SPEED pin optional, and choose between MII/RMII using a parameter instead of an #ifdef. - Make it possible to use other MMC slots than slot 0, and support different MMC/SDCard data bus widths. - Use more reasonable pull-up defaults; floating pins may consume a lot of power. - Get rid of some custom portmux code from the mimc200 board code. The old gpio/portmux API couldn't really handle its requirements, but the new one can. - Add documentation. The end result is slightly smaller code for all boards. Which isn't really the point, but at least it isn't any larger. This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if the board maintainers could help me test this on their boards. In particular, the mimc200 port has lost a lot of code, so I'm hoping Mark can help me out. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Mark Jackson <mpfj@mimc.co.uk> Cc: Alex Raimondi <alex.raimondi@miromico.ch> Cc: Julien May <julien.may@miromico.ch> Changes since v1: * Enable pullup on NWAIT * Add missing include to portmux-pio.h * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
16 years ago
#endif /* __ASM_AVR32_ARCH_PORTMUX_H__ */