Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

fsl_esdhc: Fix the voltage validation process

Browse Source 
The current code use all the voltage range support by the host
controller to do the validation.  This will cause problem when
the host supports Low Voltage Range.  Change the validation
voltage to be based on board setup.

Signed-off-by: Li Yang <leoli@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
master
Li Yang 14 years ago committed by Wolfgang Denk
parent 63786d299d
commit 030955c2ca
1 changed files with 15 additions and 5 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 20
      drivers/mmc/fsl_esdhc.c

20
drivers/mmc/fsl_esdhc.c
Unescape View File

@ -444,7 +444,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
{
struct fsl_esdhc *regs;
struct mmc *mmc;
u32 caps;
u32 caps, voltage_caps;
if (!cfg)
return -1;
@ -462,14 +462,24 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
mmc->set_ios = esdhc_set_ios;
mmc->init = esdhc_init;
voltage_caps = 0;
caps = regs->hostcapblt;
if (caps & ESDHC_HOSTCAPBLT_VS18)
mmc->voltages |= MMC_VDD_165_195;
voltage_caps |= MMC_VDD_165_195;
if (caps & ESDHC_HOSTCAPBLT_VS30)
mmc->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
if (caps & ESDHC_HOSTCAPBLT_VS33)
mmc->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
#ifdef CONFIG_SYS_SD_VOLTAGE
mmc->voltages = CONFIG_SYS_SD_VOLTAGE;
#else
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
#endif
if ((mmc->voltages & voltage_caps) == 0) {
printf("voltage not supported by controller\n");
return -1;
}
mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;

Write Preview
Loading…
Cancel
Save