MX31: Added support for the Casio COM57H5M10XRC to QONG

The patch adds setup to connect a CASIO COM57H5M10XRC
(640x480 TFT display) to the QONG module.

Signed-off-by: Stefano Babic <sbabic@denx.de>

drivers/video/mx3fb.c

@@ -56,22 +56,7 @@ void lcd_panel_disable(void)
 
 #define msleep(a) udelay(a * 1000)
 
-#ifndef CONFIG_DISPLAY_VBEST_VGG322403
-#define XRES		240
-#define YRES		320
-#define PANEL_TYPE	IPU_PANEL_TFT
-#define PIXEL_CLK	185925
-#define PIXEL_FMT	IPU_PIX_FMT_RGB666
-#define H_START_WIDTH	9		/* left_margin */
-#define H_SYNC_WIDTH	1		/* hsync_len */
-#define H_END_WIDTH	(16 + 1)	/* right_margin + hsync_len */
-#define V_START_WIDTH	7		/* upper_margin */
-#define V_SYNC_WIDTH	1		/* vsync_len */
-#define V_END_WIDTH	(9 + 1)		/* lower_margin + vsync_len */
-#define SIG_POL		(DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
-#define IF_CONF		0
-#define IF_CLK_DIV	0x175
-#else /* Display Vbest VGG322403 */
+#if defined(CONFIG_DISPLAY_VBEST_VGG322403)
 #define XRES		320
 #define YRES		240
 #define PANEL_TYPE	IPU_PANEL_TFT
@@ -86,6 +71,36 @@ void lcd_panel_disable(void)
 #define SIG_POL		(DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
 #define IF_CONF		0
 #define IF_CLK_DIV	0x175
+#elif defined(CONFIG_DISPLAY_COM57H5M10XRC)
+#define XRES		640
+#define YRES		480
+#define PANEL_TYPE	IPU_PANEL_TFT
+#define PIXEL_CLK	40000
+#define PIXEL_FMT	IPU_PIX_FMT_RGB666
+#define H_START_WIDTH	120		/* left_margin */
+#define H_SYNC_WIDTH	30		/* hsync_len */
+#define H_END_WIDTH	(10 + 30)	/* right_margin + hsync_len */
+#define V_START_WIDTH	35		/* upper_margin */
+#define V_SYNC_WIDTH	3		/* vsync_len */
+#define V_END_WIDTH	(7 + 3)	/* lower_margin + vsync_len */
+#define SIG_POL		(DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+#define IF_CONF		0
+#define IF_CLK_DIV	0x175
+#else
+#define XRES		240
+#define YRES		320
+#define PANEL_TYPE	IPU_PANEL_TFT
+#define PIXEL_CLK	185925
+#define PIXEL_FMT	IPU_PIX_FMT_RGB666
+#define H_START_WIDTH	9		/* left_margin */
+#define H_SYNC_WIDTH	1		/* hsync_len */
+#define H_END_WIDTH	(16 + 1)	/* right_margin + hsync_len */
+#define V_START_WIDTH	7		/* upper_margin */
+#define V_SYNC_WIDTH	1		/* vsync_len */
+#define V_END_WIDTH	(9 + 1)		/* lower_margin + vsync_len */
+#define SIG_POL		(DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+#define IF_CONF		0
+#define IF_CLK_DIV	0x175
 #endif
 
 #define LCD_COLOR_IPU	LCD_COLOR16

include/configs/qong.h

@@ -84,7 +84,7 @@
 #define	CONFIG_SPLASH_SCREEN
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
-#define CONFIG_DISPLAY_VBEST_VGG322403
+#define CONFIG_DISPLAY_COM57H5M10XRC
 
 /*
  * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the