configs: at91sam9n12ek: Update for DT and DM support

Update the configuration files to support the device tree and driver
model. The device clock and pins configuration are handled by the
clock and the pinctrl drivers respectively.

Because the limitation of internal SRAM size, the SPL with driver
model can't be supported, disable the SPL option.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

board/atmel/at91sam9n12ek/at91sam9n12ek.c

@@ -133,6 +133,7 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD */
 
 /* SPI chip select control */
+#ifndef CONFIG_DM_SPI
 #ifdef CONFIG_ATMEL_SPI
 #include <spi.h>
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
@@ -164,6 +165,7 @@ void spi_cs_deactivate(struct spi_slave *slave)
 	}
 }
 #endif /* CONFIG_ATMEL_SPI */
+#endif
 
 #ifdef CONFIG_GENERIC_ATMEL_MCI
 int board_mmc_init(bd_t *bd)

configs/at91sam9n12ek_mmc_defconfig

@@ -1,6 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9N12EK=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
@@ -19,9 +21,24 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y

configs/at91sam9n12ek_nandflash_defconfig

@@ -1,17 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9N12EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
@@ -25,9 +21,24 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y

configs/at91sam9n12ek_spiflash_defconfig

@@ -1,18 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9N12EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_BOOTZ=y
@@ -26,9 +21,24 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y

include/configs/at91sam9n12ek.h

@@ -28,14 +28,6 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-
 /* LCD */
 #define LCD_BPP				LCD_COLOR16
 #define LCD_OUTPUT_BPP			24
@@ -45,7 +37,6 @@
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 
-
 /*
  * BOOTP options
  */
@@ -69,14 +60,11 @@
  * that address while providing maximum stack area below.
  */
 # define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_SF_DEFAULT_SPEED		30000000
-#define CONFIG_ENV_SPI_MODE		SPI_MODE_3
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 #endif
 
 /* NAND flash */
@@ -115,11 +103,6 @@
 	"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
 	"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
 
-/* MMC */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
 /* Ethernet */
 #define CONFIG_KS8851_MLL
 #define CONFIG_KS8851_MLL_BASEADDR	0x30000000 /* use NCS2 */
@@ -156,7 +139,7 @@
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET		0x120000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND						\