diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6f7db82..c2dc240 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -386,6 +386,8 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb +dtb-$(CONFIG_TARGET_PM9263) += at91sam9263ek.dtb + dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb diff --git a/board/ronetix/pm9263/Makefile b/board/ronetix/pm9263/Makefile index 43ea599..53e621d 100644 --- a/board/ronetix/pm9263/Makefile +++ b/board/ronetix/pm9263/Makefile @@ -11,5 +11,5 @@ # obj-y += pm9263.o -obj-y += led.o +obj-$(CONFIG_AT91_LED) += led.o obj-$(CONFIG_HAS_DATAFLASH) += partition.o diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 0c23bb6..8d20084 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -20,7 +20,6 @@ #include #include #include -#include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif @@ -277,7 +276,7 @@ extern flash_info_t flash_info[]; void lcd_show_board_info(void) { - ulong dram_size, nand_size, flash_size, dataflash_size; + ulong dram_size, nand_size, flash_size; int i; char temp[32]; @@ -300,17 +299,11 @@ void lcd_show_board_info(void) for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) flash_size += flash_info[i].size; - dataflash_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) - dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number * - dataflash_info[i].Device.pages_size; - lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n" - "4 MB PSRAM, %ld MB DataFlash\n", + "4 MB PSRAM\n", dram_size >> 20, nand_size >> 20, - flash_size >> 20, - dataflash_size >> 20); + flash_size >> 20); } #endif /* CONFIG_LCD_INFO */ @@ -318,12 +311,6 @@ void lcd_show_board_info(void) int board_early_init_f(void) { - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOCDE); - - at91_seriald_hw_init(); - return 0; } @@ -338,9 +325,6 @@ int board_init(void) #ifdef CONFIG_CMD_NAND pm9263_nand_hw_init(); #endif -#ifdef CONFIG_HAS_DATAFLASH - at91_spi0_hw_init(1 << 0); -#endif #ifdef CONFIG_MACB pm9263_macb_hw_init(); #endif diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index 9e647f8..7516c95 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_PM9263=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 @@ -13,6 +15,7 @@ CONFIG_SYS_PROMPT="u-boot-pm9263> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set @@ -20,8 +23,22 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_JFFS2=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_CLK=y +CONFIG_CLK_AT91=y +CONFIG_DM_GPIO=y +CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_DATAFLASH=y +CONFIG_DM_SERIAL=y +CONFIG_ATMEL_USART=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_SPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_LCD=y diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index d24280c..f7a5551 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -154,11 +154,6 @@ /* * Hardware drivers */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - /* LCD */ #define LCD_BPP LCD_COLOR8 #define CONFIG_LCD_LOGO 1 @@ -170,12 +165,6 @@ #define CONFIG_LCD_IN_PSRAM 1 -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED GPIO_PIN_PB(7) /* this is the power led */ -#define CONFIG_GREEN_LED GPIO_PIN_PB(8) /* this is the user1 led */ - - /* * BOOTP options */ @@ -189,15 +178,6 @@ #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - /* NOR flash, if populated */ #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 @@ -263,11 +243,13 @@ #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) #define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_ENV_SECT_SIZE 0x210 +#define CONFIG_ENV_SPI_MAX_HZ 15000000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x84000 0x294000; " \ + "bootm 0x22000000" #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ "root=/dev/mtdblock0 " \ "mtdparts=atmel_nand:-(root) "\ @@ -356,7 +338,7 @@ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ GENERATED_GBL_DATA_SIZE) #endif