From 104992fc541302a6bac74448e01e7fdad20abca0 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Sun, 2 Nov 2008 18:19:32 -0600 Subject: [PATCH] powerpc 86xx: Handle CCSR relocation earlier Currently, the CCSR gets relocated while translation is enabled, meaning we need 2 BAT translations to get to both the old location and the new location. Also, the DEFAULT CCSR location has a dependency on the BAT that maps the FLASH region. Moving the relocation removes this unnecessary dependency. This makes it easier and more intutive to modify the board's memory map. Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same BAT for CCSR space. Signed-off-by: Becky Bruce --- cpu/mpc86xx/start.S | 29 ++++++++++++++++++++++++----- include/configs/MPC8610HPCD.h | 24 +++++++++++++----------- 2 files changed, 37 insertions(+), 16 deletions(-) diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 75e4317..b1a23b4 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -219,6 +219,11 @@ boot_warm: sync #endif +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) + /* setup ccsrbar now while we're in real mode */ + bl setup_ccsrbar +#endif + /* * Calculate absolute address in FLASH and jump there *------------------------------------------------------*/ @@ -281,10 +286,6 @@ in_flash: bl setup_bats sync -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) - /* setup ccsrbar */ - bl setup_ccsrbar -#endif /* run low-level CPU init code (from Flash) */ bl cpu_init_f @@ -365,10 +366,28 @@ invalidate_bats: * early_bats: * * Set up bats needed early on - this is usually the BAT for the - * stack-in-cache and the Flash + * stack-in-cache, the Flash, and CCSR space */ .globl early_bats early_bats: + /* IBAT 3 */ + lis r4, CONFIG_SYS_IBAT3L@h + ori r4, r4, CONFIG_SYS_IBAT3L@l + lis r3, CONFIG_SYS_IBAT3U@h + ori r3, r3, CONFIG_SYS_IBAT3U@l + mtspr IBAT3L, r4 + mtspr IBAT3U, r3 + isync + + /* DBAT 3 */ + lis r4, CONFIG_SYS_DBAT3L@h + ori r4, r4, CONFIG_SYS_DBAT3L@l + lis r3, CONFIG_SYS_DBAT3U@h + ori r3, r3, CONFIG_SYS_DBAT3U@l + mtspr DBAT3L, r4 + mtspr DBAT3U, r3 + isync + /* IBAT 5 */ lis r4, CONFIG_SYS_IBAT5L@h ori r4, r4, CONFIG_SYS_IBAT5L@l diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 67b2764..6f04127 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -370,27 +370,29 @@ #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U /* - * BAT3 32M Cache-inhibited, guarded - * 0xe200_0000 1M PCI-Express 2 I/O - * 0xe300_0000 1M PCI-Express 1 I/O + * BAT3 4M Cache-inhibited, guarded + * 0xe000_0000 4M CCSR */ -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \ +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (CONFIG_SYS_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U /* - * BAT4 4M Cache-inhibited, guarded - * 0xe000_0000 4M CCSR + * BAT4 32M Cache-inhibited, guarded + * 0xe200_0000 1M PCI-Express 2 I/O + * 0xe300_0000 1M PCI-Express 1 I/O */ -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \ + +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \ | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U + /* * BAT5 128K Cacheable, non-guarded * 0xe400_0000 128K Init RAM for stack in the CPU DCache (no backing memory)