Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig

Browse Source 
This converts the following to Kconfig:
   CONFIG_SYS_OMAP24_I2C_SLAVE
   CONFIG_SYS_OMAP24_I2C_SPEED

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
master
Adam Ford 7 years ago committed by Tom Rini
parent 76e22222d3
commit 11d2e98d7e
24 changed files with 21 additions and 32 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 1
      configs/am335x_baltos_defconfig
  2. 1
      configs/cm_t3517_defconfig
  3. 1
      configs/eco5pk_defconfig
  4. 1
      configs/kc1_defconfig
  5. 1
      configs/mt_ventoux_defconfig
  6. 1
      configs/sniper_defconfig
  7. 1
      configs/twister_defconfig
  8. 14
      drivers/i2c/Kconfig
  9. 2
      include/configs/am3517_crane.h
  10. 2
      include/configs/am3517_evm.h
  11. 2
      include/configs/baltos.h
  12. 2
      include/configs/bur_am335x_common.h
  13. 2
      include/configs/cm_t35.h
  14. 2
      include/configs/cm_t3517.h
  15. 2
      include/configs/kc1.h
  16. 2
      include/configs/mcx.h
  17. 2
      include/configs/nokia_rx51.h
  18. 2
      include/configs/siemens-am33x-common.h
  19. 2
      include/configs/sniper.h
  20. 2
      include/configs/tam3517-common.h
  21. 2
      include/configs/tao3530.h
  22. 2
      include/configs/ti_armv7_omap.h
  23. 2
      include/configs/tricorder.h
  24. 2
      scripts/config_whitelist.txt

1
configs/am335x_baltos_defconfig
Unescape View File

@ -47,6 +47,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),128k(SPL.backup1),128k(SPL.backup2),128k(SPL.backup3),1920k(u-boot),-(UBI)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_SYS_OMAP24_I2C_SPEED=1000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_PHYLIB=y

1
configs/cm_t3517_defconfig
Unescape View File

@ -31,6 +31,7 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),256k(u-boot-env),4m(kernel),-(fs)"
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y

1
configs/eco5pk_defconfig
Unescape View File

@ -26,6 +26,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader-nand),1024k(uboot-nand),256k(params-nand),5120k(kernel),-(ubifs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

1
configs/kc1_defconfig
Unescape View File

@ -34,6 +34,7 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y

1
configs/mt_ventoux_defconfig
Unescape View File

@ -31,6 +31,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),8m(ubisystem),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

1
configs/sniper_defconfig
Unescape View File

@ -35,6 +35,7 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y

1
configs/twister_defconfig
Unescape View File

@ -31,6 +31,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),6m(kernel),-(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_OMAP24_I2C_SPEED=400000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y

14
drivers/i2c/Kconfig
Unescape View File

@ -162,6 +162,20 @@ config SYS_I2C_OMAP24XX
help
Add support for the OMAP2+ I2C driver.
if SYS_I2C_OMAP24XX
config SYS_OMAP24_I2C_SLAVE
int "I2C Slave addr channel 0"
default 1
help
OMAP24xx I2C Slave address channel 0
config SYS_OMAP24_I2C_SPEED
int "I2C Slave channel 0 speed"
default 100000
help
OMAP24xx Slave speed channel 0
endif
config SYS_I2C_RCAR_IIC
bool "Renesas RCar Gen3 IIC driver"
depends on RCAR_GEN3 && DM_I2C

2
include/configs/am3517_crane.h
Unescape View File

@ -97,8 +97,6 @@
#endif /* CONFIG_USB_AM35X */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* Board NAND Info.

2
include/configs/am3517_evm.h
Unescape View File

@ -56,8 +56,6 @@
#endif /* CONFIG_USB_MUSB_AM35X */
/* I2C */
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* Ethernet */
#define CONFIG_DRIVER_TI_EMAC

2
include/configs/baltos.h
Unescape View File

@ -39,8 +39,6 @@
#define CONFIG_MTD_DEVICE
/* I2C configuration */
#undef CONFIG_SYS_OMAP24_I2C_SPEED
#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
#ifdef CONFIG_NAND
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000

2
include/configs/bur_am335x_common.h
Unescape View File

@ -70,8 +70,6 @@
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* Our platforms make use of SPL to initalize the hardware (primarily

2
include/configs/cm_t35.h
Unescape View File

@ -80,8 +80,6 @@
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_BUS 0

2
include/configs/cm_t3517.h
Unescape View File

@ -89,8 +89,6 @@
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_SYS_I2C_EEPROM_BUS 0

2
include/configs/kc1.h
Unescape View File

@ -58,8 +58,6 @@
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_I2C_MULTI_BUS
/*

2
include/configs/mcx.h
Unescape View File

@ -79,8 +79,6 @@
#define CONFIG_MTD_DEVICE
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* RTC */
#define CONFIG_RTC_DS1337

2
include/configs/nokia_rx51.h
Unescape View File

@ -95,8 +95,6 @@
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* TWL4030

2
include/configs/siemens-am33x-common.h
Unescape View File

@ -97,8 +97,6 @@
/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK

2
include/configs/sniper.h
Unescape View File

@ -59,8 +59,6 @@
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_I2C_MULTI_BUS
/*

2
include/configs/tam3517-common.h
Unescape View File

@ -67,8 +67,6 @@
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07

2
include/configs/tao3530.h
Unescape View File

@ -63,8 +63,6 @@
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_I2C_MULTI_BUS
/*

2
include/configs/ti_armv7_omap.h
Unescape View File

@ -13,8 +13,6 @@
#define __CONFIG_TI_ARMV7_OMAP_H__
/* I2C IP block */
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/*
* GPMC NAND block. We support 1 device and the physical address to

2
include/configs/tricorder.h
Unescape View File

@ -58,8 +58,6 @@
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
/* EEPROM */

2
scripts/config_whitelist.txt
Unescape View File

@ -3881,12 +3881,10 @@ CONFIG_SYS_NVRAM_SIZE
CONFIG_SYS_OBIR
CONFIG_SYS_OHCI_BE_CONTROLLER
CONFIG_SYS_OHCI_SWAP_REG_ACCESS
CONFIG_SYS_OMAP24_I2C_SLAVE
CONFIG_SYS_OMAP24_I2C_SLAVE1
CONFIG_SYS_OMAP24_I2C_SLAVE2
CONFIG_SYS_OMAP24_I2C_SLAVE3
CONFIG_SYS_OMAP24_I2C_SLAVE4
CONFIG_SYS_OMAP24_I2C_SPEED
CONFIG_SYS_OMAP24_I2C_SPEED1
CONFIG_SYS_OMAP24_I2C_SPEED2
CONFIG_SYS_OMAP24_I2C_SPEED3

Write Preview
Loading…
Cancel
Save