diff --git a/board/esd/du440/Makefile b/board/esd/du440/Makefile new file mode 100644 index 0000000..e996a0a --- /dev/null +++ b/board/esd/du440/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2002-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/esd/du440/config.mk b/board/esd/du440/config.mk new file mode 100644 index 0000000..5164334 --- /dev/null +++ b/board/esd/du440/config.mk @@ -0,0 +1,37 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFFFA0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c new file mode 100644 index 0000000..ceb128c --- /dev/null +++ b/board/esd/du440/du440.c @@ -0,0 +1,1018 @@ +/* + * (C) Copyright 2008 + * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include "du440.h" + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +extern ulong flash_get_size (ulong base, int banknum); + +int usbhub_init(void); +int dvi_init(void); +int eeprom_write_enable (unsigned dev_addr, int state); +int board_revision(void); + +static int du440_post_errors; + +int board_early_init_f(void) +{ + u32 sdr0_cust0; + u32 sdr0_pfc1, sdr0_pfc2; + u32 reg; + + mtdcr(ebccfga, xbcfg); + mtdcr(ebccfgd, 0xb8400000); + + /* + * Setup the GPIO pins + */ + out_be32((void*)GPIO0_OR, 0x00000000 | CFG_GPIO0_EP_EEP); + out_be32((void*)GPIO0_TCR, 0x0000000f | CFG_GPIO0_EP_EEP); + out_be32((void*)GPIO0_OSRL, 0x50055400); + out_be32((void*)GPIO0_OSRH, 0x550050aa); + out_be32((void*)GPIO0_TSRL, 0x50055400); + out_be32((void*)GPIO0_TSRH, 0x55005000); + out_be32((void*)GPIO0_ISR1L, 0x50000000); + out_be32((void*)GPIO0_ISR1H, 0x00000000); + out_be32((void*)GPIO0_ISR2L, 0x00000000); + out_be32((void*)GPIO0_ISR2H, 0x00000100); + out_be32((void*)GPIO0_ISR3L, 0x00000000); + out_be32((void*)GPIO0_ISR3H, 0x00000000); + + out_be32((void*)GPIO1_OR, 0x00000000); + out_be32((void*)GPIO1_TCR, 0xc2000000 | + CFG_GPIO1_IORSTN | + CFG_GPIO1_LEDUSR1 | + CFG_GPIO1_LEDUSR2 | + CFG_GPIO1_LEDPOST | + CFG_GPIO1_LEDDU); + out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU); + + out_be32((void*)GPIO1_OSRL, 0x5c280000); + out_be32((void*)GPIO1_OSRH, 0x00000000); + out_be32((void*)GPIO1_TSRL, 0x0c000000); + out_be32((void*)GPIO1_TSRH, 0x00000000); + out_be32((void*)GPIO1_ISR1L, 0x00005550); + out_be32((void*)GPIO1_ISR1H, 0x00000000); + out_be32((void*)GPIO1_ISR2L, 0x00050000); + out_be32((void*)GPIO1_ISR2H, 0x00000000); + out_be32((void*)GPIO1_ISR3L, 0x01400000); + out_be32((void*)GPIO1_ISR3H, 0x00000000); + + /* + * Setup the interrupt controller polarities, triggers, etc. + */ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + mtdcr(uic0er, 0x00000000); /* disable all */ + mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ + mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic0sr, 0xffffffff); /* clear all */ + + /* + * UIC1: + * bit30: ext. Irq 1: PLD : int 32+30 + */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(uic1er, 0x00000000); /* disable all */ + mtdcr(uic1cr, 0x00000000); /* all non-critical */ + mtdcr(uic1pr, 0xfffffffd); + mtdcr(uic1tr, 0x00000000); + mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + + /* + * UIC2 + * bit3: ext. Irq 2: DCF77 : int 64+3 + */ + mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(uic2er, 0x00000000); /* disable all */ + mtdcr(uic2cr, 0x00000000); /* all non-critical */ + mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ + mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(uic2sr, 0xffffffff); /* clear all */ + + /* select Ethernet pins */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_PFC2, sdr0_pfc2); + + /* setup EMAC bridge interface */ + if (board_revision() == 0) { + /* 1 x MII */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_1_2; + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_1_2; + } else { + /* 2 x SMII */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_6; + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_6; + } + + /* enable 2nd IIC */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL; + + mtsdr(SDR0_PFC2, sdr0_pfc2); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + /* PCI arbiter enabled */ + mfsdr(sdr_pci0, reg); + mtsdr(sdr_pci0, 0x80000000 | reg); + + /* setup NAND FLASH */ + mfsdr(SDR0_CUST0, sdr0_cust0); + sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL | + SDR0_CUST0_NDFC_ENABLE | + SDR0_CUST0_NDFC_BW_8_BIT | + SDR0_CUST0_NDFC_ARE_MASK | + (0x80000000 >> (28 + CFG_NAND0_CS)) | + (0x80000000 >> (28 + CFG_NAND1_CS)); + mtsdr(SDR0_CUST0, sdr0_cust0); + + return 0; +} + +int misc_init_r(void) +{ + uint pbcr; + int size_val = 0; + u32 reg; + unsigned long usb2d0cr = 0; + unsigned long usb2phy0cr, usb2h0cr = 0; + unsigned long sdr0_pfc1; + int i, j; + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + + mtdcr(ebccfga, pb0cr); + pbcr = mfdcr(ebccfgd); + size_val = ffs(gd->bd->bi_flashsize) - 21; + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtdcr(ebccfga, pb0cr); + mtdcr(ebccfgd, pbcr); + + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); + + /* + * USB suff... + */ + /* SDR Setting */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; + usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; + + /* An 8-bit/60MHz interface is the only possible alternative + when connecting the Device to the PHY */ + usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; + + /* To enable the USB 2.0 Device function through the UTMI interface */ + usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; + + sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; + sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; + + mtsdr(SDR0_PFC1, sdr0_pfc1); + mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB2H0CR, usb2h0cr); + + /* clear resets */ + udelay (1000); + mtsdr(SDR0_SRST1, 0x00000000); + udelay (1000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Host(int phy)\n"); + + /* + * Clear PLB4A0_ACR[WRP] + * This fix will make the MAL burst disabling patch for the Linux + * EMAC driver obsolete. + */ + reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; + mtdcr(plb4_acr, reg); + + /* + * release IO-RST# + * We have to wait at least 560ms until we may call usbhub_init + */ + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_IORSTN); + + /* + * flash USR1/2 LEDs (600ms) + * This results in the necessary delay from IORST# until + * calling usbhub_init will succeed + */ + for (j = 0; j < 3; j++) { + out_be32((void*)GPIO1_OR, + (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR2) | + CFG_GPIO1_LEDUSR1); + + for (i = 0; i < 100; i++) + udelay(1000); + + out_be32((void*)GPIO1_OR, + (in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDUSR1) | + CFG_GPIO1_LEDUSR2); + + for (i = 0; i < 100; i++) + udelay(1000); + } + + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & + ~(CFG_GPIO1_LEDUSR1 | CFG_GPIO1_LEDUSR2)); + + if (usbhub_init()) + du440_post_errors++; + + if (dvi_init()) + du440_post_errors++; + + return 0; +} + +int pld_revision(void) +{ + out8(CFG_CPLD_BASE, 0x00); + return (int)(in8(CFG_CPLD_BASE) & CPLD_VERSION_MASK); +} + +int board_revision(void) +{ + int rpins = (int)((in_be32((void*)GPIO1_IR) & CFG_GPIO1_HWVER_MASK) + >> CFG_GPIO1_HWVER_SHIFT); + + return ((rpins & 1) << 3) | ((rpins & 2) << 1) | + ((rpins & 4) >> 1) | ((rpins & 8) >> 3); +} + +#if defined(CONFIG_SHOW_ACTIVITY) +void board_show_activity (ulong timestamp) +{ + if ((timestamp % 100) == 0) + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) ^ CFG_GPIO1_LEDUSR1); +} + +void show_activity(int arg) +{ +} +#endif /* CONFIG_SHOW_ACTIVITY */ + +int du440_phy_addr(int devnum) +{ + if (board_revision() == 0) + return devnum; + + return devnum + 1; +} + +int checkboard(void) +{ + char serno[32]; + + puts("Board: DU440"); + + if (getenv_r("serial#", serno, sizeof(serno)) > 0) { + puts(", serial# "); + puts(serno); + } + + printf(", HW-Rev. 1.%d, CPLD-Rev. 1.%d\n", + board_revision(), pld_revision()); + return (0); +} + +/* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + */ +#if defined(CONFIG_PCI) +int pci_pre_init(struct pci_controller *hose) +{ + unsigned long addr; + + /* + * Set priority for all PLB3 devices to 0. + * Set PLB3 arbiter to fair mode. + */ + mfsdr(sdr_amp1, addr); + mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb3_acr); + mtdcr(plb3_acr, addr | 0x80000000); + + /* + * Set priority for all PLB4 devices to 0. + */ + mfsdr(sdr_amp0, addr); + mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ + mtdcr(plb4_acr, addr); + + /* + * Set Nebula PLB4 arbiter to fair mode. + */ + /* Segment0 */ + addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; + addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; + addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; + addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; + mtdcr(plb0_acr, addr); + + /* Segment1 */ + addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; + addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; + addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; + addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; + mtdcr(plb1_acr, addr); + + return 1; +} +#endif /* defined(CONFIG_PCI) */ + +/* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller *hose) +{ + /* + * Set up Direct MMIO registers + */ + /* + * PowerPC440EPX PCI Master configuration. + * Map one 1Gig range of PLB/processor addresses to PCI memory space. + * PLB address 0xA0000000-0xDFFFFFFF + * ==> PCI address 0xA0000000-0xDFFFFFFF + * Use byte reversed out routines to handle endianess. + * Make this region non-prefetchable. + */ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + /* - disabled b4 setting */ + out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ + /* and enable region */ + + out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ + /* - disabled b4 setting */ + out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ + /* and enable region */ + + out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + + /* + * Set up Configuration registers + */ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + PCI_VENDOR_ID_ESDGMBH); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, PCI_DEVICE_ID_DU440); + + pci_write_config_word(0, PCI_CLASS_SUB_CODE, PCI_CLASS_BRIDGE_HOST); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); + +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +void pci_master_init(struct pci_controller *hose) +{ + unsigned short temp_short; + + /* + * Write the PowerPC440 EP PCI Configuration regs. + * Enable PowerPC440 EP to be a master on the PCI bus (PMM). + * Enable PowerPC440 EP to act as a PCI memory target (PTM). + */ + pci_read_config_word(0, PCI_COMMAND, &temp_short); + pci_write_config_word(0, PCI_COMMAND, + temp_short | PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ + +/* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + */ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* always configured as host. */ + return (1); +} +#endif /* defined(CONFIG_PCI) */ + +int last_stage_init(void) +{ + int e, i; + + /* everyting is ok: turn on POST-LED */ + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST); + + /* slowly blink on errors and finally keep LED off */ + for (e = 0; e < du440_post_errors; e++) { + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) | CFG_GPIO1_LEDPOST); + + for (i = 0; i < 500; i++) + udelay(1000); + + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) & ~CFG_GPIO1_LEDPOST); + + for (i = 0; i < 500; i++) + udelay(1000); + } + + return 0; +} + +#if defined(CONFIG_I2C_MULTI_BUS) +/* + * read field strength from I2C ADC + */ +int dcf77_status(void) +{ + unsigned int oldbus; + uchar u[2]; + int mv; + + oldbus = I2C_GET_BUS(); + I2C_SET_BUS(1); + + if (i2c_read (IIC1_MCP3021_ADDR, 0, 0, u, 2)) { + I2C_SET_BUS(oldbus); + return -1; + } + + mv = (int)(((u[0] << 8) | u[1]) >> 2) * 3300 / 1024; + + I2C_SET_BUS(oldbus); + return mv; +} + +int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int mv; + u32 pin, pinold; + unsigned long long t1, t2; + bd_t *bd = gd->bd; + + printf("DCF77: "); + mv = dcf77_status(); + if (mv > 0) + printf("signal=%d mV\n", mv); + else + printf("ERROR - no signal\n"); + + t1 = t2 = 0; + pinold = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77; + while (!ctrlc()) { + pin = in_be32((void*)GPIO1_IR) & CFG_GPIO1_DCF77; + if (pin && !pinold) { /* bit start */ + t1 = get_ticks(); + if (t2 && ((unsigned int)(t1 - t2) / + (bd->bi_procfreq / 1000) >= 1800)) + printf("Start of minute\n"); + + t2 = t1; + } + if (t1 && !pin && pinold) { /* bit end */ + printf("%5d\n", (unsigned int)(get_ticks() - t1) / + (bd->bi_procfreq / 1000)); + } + pinold = pin; + } + + printf("Abort\n"); + return 0; +} +U_BOOT_CMD( + dcf77, 1, 1, do_dcf77, + "dcf77 - Check DCF77 receiver\n", + NULL + ); + +/* + * initialize USB hub via I2C1 + */ +int usbhub_init(void) +{ + int reg; + int ret = 0; + unsigned int oldbus; + uchar u[] = {0x04, 0x24, 0x04, 0x07, 0x25, 0x00, 0x00, 0xd3, + 0x18, 0xe0, 0x00, 0x00, 0x01, 0x64, 0x01, 0x64, + 0x32}; + uchar stcd; + + printf("Hub: "); + + oldbus = I2C_GET_BUS(); + I2C_SET_BUS(1); + + for (reg = 0; reg < sizeof(u); reg++) + if (i2c_write (IIC1_USB2507_ADDR, reg, 1, &u[reg], 1)) { + ret = -1; + break; + } + + if (ret == 0) { + stcd = 0x03; + if (i2c_write (IIC1_USB2507_ADDR, 0, 1, &stcd, 1)) + ret = -1; + } + + if (ret == 0) + printf("initialized\n"); + else + printf("failed - cannot initialize USB hub\n"); + + I2C_SET_BUS(oldbus); + return ret; +} + +int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + usbhub_init(); + return 0; +} +U_BOOT_CMD( + hubinit, 1, 1, do_hubinit, + "hubinit - Initialize USB hub\n", + NULL + ); +#endif /* CONFIG_I2C_MULTI_BUS */ + +#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3 +int boot_eeprom_write (unsigned dev_addr, + unsigned offset, + uchar *buffer, + unsigned cnt) +{ + unsigned end = offset + cnt; + unsigned blk_off; + int rcode = 0; + +#if defined(CFG_EEPROM_WREN) + eeprom_write_enable(dev_addr, 1); +#endif + /* + * Write data until done or would cross a write page boundary. + * We must write the address again when changing pages + * because the address counter only increments within a page. + */ + + while (offset < end) { + unsigned alen, len; + unsigned maxlen; + + uchar addr[2]; + + blk_off = offset & 0xFF; /* block offset */ + + addr[0] = offset >> 8; /* block number */ + addr[1] = blk_off; /* block offset */ + alen = 2; + addr[0] |= dev_addr; /* insert device address */ + + len = end - offset; + + /* + * For a FRAM device there is no limit on the number of the + * bytes that can be ccessed with the single read or write + * operation. + */ +#if defined(CFG_BOOT_EEPROM_PAGE_WRITE_BITS) + +#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS) +#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1)) + + maxlen = BOOT_EEPROM_PAGE_SIZE - + BOOT_EEPROM_PAGE_OFFSET(blk_off); +#else + maxlen = 0x100 - blk_off; +#endif + if (maxlen > I2C_RXTX_LEN) + maxlen = I2C_RXTX_LEN; + + if (len > maxlen) + len = maxlen; + + if (i2c_write (addr[0], offset, alen - 1, buffer, len) != 0) + rcode = 1; + + buffer += len; + offset += len; + +#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS) + udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); +#endif + } +#if defined(CFG_EEPROM_WREN) + eeprom_write_enable(dev_addr, 0); +#endif + return rcode; +} + +int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + ulong sdsdp[4]; + + if (argc > 1) { + if (!strcmp(argv[1], "533")) { + printf("Bootstrapping for 533MHz\n"); + sdsdp[0] = 0x87788252; + /* PLB-PCI-divider = 3 : sync PCI clock=44MHz */ + sdsdp[1] = 0x095fa030; + sdsdp[2] = 0x40082350; + sdsdp[3] = 0x0d050000; + } else if (!strcmp(argv[1], "533-66")) { + printf("Bootstrapping for 533MHz (66MHz PCI)\n"); + sdsdp[0] = 0x87788252; + /* PLB-PCI-divider = 2 : sync PCI clock=66MHz */ + sdsdp[1] = 0x0957a030; + sdsdp[2] = 0x40082350; + sdsdp[3] = 0x0d050000; + } else if (!strcmp(argv[1], "667")) { + printf("Bootstrapping for 667MHz\n"); + sdsdp[0] = 0x8778a256; + /* PLB-PCI-divider = 4 : sync PCI clock=33MHz */ + sdsdp[1] = 0x0947a030; + /* PLB-PCI-divider = 3 : sync PCI clock=44MHz + * -> not working when overclocking 533MHz chips + * -> untested on 667MHz chips */ + /* sdsdp[1]=0x095fa030; */ + sdsdp[2] = 0x40082350; + sdsdp[3] = 0x0d050000; + } + } else { + printf("Bootstrapping for 533MHz (default)\n"); + sdsdp[0] = 0x87788252; + /* PLB-PCI-divider = 3 : sync PCI clock=44MHz */ + sdsdp[1] = 0x095fa030; + sdsdp[2] = 0x40082350; + sdsdp[3] = 0x0d050000; + } + + printf("Writing boot EEPROM ...\n"); + if (boot_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR, + 0, (uchar*)sdsdp, 16) != 0) + printf("boot_eeprom_write failed\n"); + else + printf("done (dump via 'i2c md 52 0.1 10')\n"); + + return 0; +} +U_BOOT_CMD( + sbe, 2, 0, do_setup_boot_eeprom, + "sbe - setup boot eeprom\n", + NULL + ); + +#if defined(CFG_EEPROM_WREN) +/* + * Input: I2C address of EEPROM device to enable. + * -1: deliver current state + * 0: disable write + * 1: enable write + * Returns: -1: wrong device address + * 0: dis-/en- able done + * 0/1: current state if was -1. + */ +int eeprom_write_enable (unsigned dev_addr, int state) +{ + if ((CFG_I2C_EEPROM_ADDR != dev_addr) && + (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) + return -1; + else { + switch (state) { + case 1: + /* Enable write access, clear bit GPIO_SINT2. */ + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) & ~CFG_GPIO0_EP_EEP); + state = 0; + break; + case 0: + /* Disable write access, set bit GPIO_SINT2. */ + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) | CFG_GPIO0_EP_EEP); + state = 0; + break; + default: + /* Read current status back. */ + state = (0 == (in_be32((void*)GPIO0_OR) & + CFG_GPIO0_EP_EEP)); + break; + } + } + return state; +} + +int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int query = argc == 1; + int state = 0; + + if (query) { + /* Query write access state. */ + state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1); + if (state < 0) + puts ("Query of write access state failed.\n"); + else { + printf ("Write access for device 0x%0x is %sabled.\n", + CFG_I2C_EEPROM_ADDR, state ? "en" : "dis"); + state = 0; + } + } else { + if ('0' == argv[1][0]) { + /* Disable write access. */ + state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0); + } else { + /* Enable write access. */ + state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1); + } + if (state < 0) + puts ("Setup of write access state failed.\n"); + } + + return state; +} + +U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, + "eepwren - Enable / disable / query EEPROM write access\n", + NULL); +#endif /* #if defined(CFG_EEPROM_WREN) */ + +static int got_pldirq; + +static int pld_interrupt(u32 arg) +{ + int rc = -1; /* not for us */ + u8 status = in8(CFG_CPLD_BASE); + + /* check for PLD interrupt */ + if (status & PWR_INT_FLAG) { + /* reset this int */ + out8(CFG_CPLD_BASE, 0); + rc = 0; + got_pldirq = 1; /* trigger backend */ + } + + return rc; +} + +int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + got_pldirq = 0; + + /* clear any pending interrupt */ + out8(CFG_CPLD_BASE, 0); + + irq_install_handler(CPLD_IRQ, + (interrupt_handler_t *)pld_interrupt, 0); + + printf("Waiting ...\n"); + while(!got_pldirq) { + /* Abort if ctrl-c was pressed */ + if (ctrlc()) { + puts("\nAbort\n"); + break; + } + } + if (got_pldirq) { + printf("Got interrupt!\n"); + printf("Power %sready!\n", + in8(CFG_CPLD_BASE) & PWR_RDY ? "":"NOT "); + } + + irq_free_handler(CPLD_IRQ); + return 0; +} +U_BOOT_CMD( + wpi, 1, 1, do_waitpwrirq, + "wpi - Wait for power change interrupt\n", + NULL + ); + +/* + * initialize DVI panellink transmitter + */ +int dvi_init(void) +{ + int i; + int ret = 0; + unsigned int oldbus; + uchar u[] = {0x08, 0x34, + 0x09, 0x20, + 0x0a, 0x90, + 0x0c, 0x89, + 0x08, 0x35}; + + printf("DVI: "); + + oldbus = I2C_GET_BUS(); + I2C_SET_BUS(0); + + for (i = 0; i < sizeof(u); i += 2) + if (i2c_write (0x38, u[i], 1, &u[i + 1], 1)) { + ret = -1; + break; + } + + if (ret == 0) + printf("initialized\n"); + else + printf("failed - cannot initialize DVI transmitter\n"); + + I2C_SET_BUS(oldbus); + return ret; +} + +int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + dvi_init(); + return 0; +} +U_BOOT_CMD( + dviinit, 1, 1, do_dviinit, + "dviinit - Initialize DVI Panellink transmitter\n", + NULL + ); + +/* + * TODO: 'time' command might be useful for others as well. + * Move to 'common' directory. + */ +int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + unsigned long long start, end; + char c, cmd[CFG_CBSIZE]; + char *p, *d = cmd; + int ret, i; + ulong us; + + for (i = 1; i < argc; i++) { + p = argv[i]; + + if (i > 1) + *d++ = ' '; + + while ((c = *p++) != '\0') { + *d++ = c; + } + } + *d = '\0'; + + start = get_ticks(); + ret = run_command (cmd, 0); + end = get_ticks(); + + printf("ticks=%d\n", (ulong)(end - start)); + us = (ulong)((1000L * (end - start)) / (get_tbclk() / 1000)); + printf("usec=%d\n", us); + + return ret; +} +U_BOOT_CMD( + time, CFG_MAXARGS, 1, do_time, + "time - run command and output execution time\n", + NULL + ); + +extern void video_hw_rectfill ( + unsigned int bpp, /* bytes per pixel */ + unsigned int dst_x, /* dest pos x */ + unsigned int dst_y, /* dest pos y */ + unsigned int dim_x, /* frame width */ + unsigned int dim_y, /* frame height */ + unsigned int color /* fill color */ + ); + +/* + * graphics demo + * draw rectangles using pseudorandom number generator + * (see http://www.embedded.com/columns/technicalinsights/20900500) + */ +unsigned int rprime = 9972; +static unsigned int r; +static unsigned int Y; + +unsigned int prng(unsigned int max) +{ + if (r == 0 || r == 1 || r == -1) + r = rprime; /* keep from getting stuck */ + + r = (9973 * ~r) + ((Y) % 701); /* the actual algorithm */ + Y = (r >> 16) % max; /* choose upper bits and reduce */ + return Y; +} + +int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + unsigned int color; + unsigned int x, y, dx, dy; + + while (!ctrlc()) { + x = prng(1280 - 1); + y = prng(1024 - 1); + dx = prng(1280- x - 1); + dy = prng(1024 - y - 1); + color = prng(0x10000); + video_hw_rectfill(2, x, y, dx, dy, color); + } + + return 0; +} +U_BOOT_CMD( + gfxdemo, CFG_MAXARGS, 1, do_gfxdemo, + "gfxdemo - demo\n", + NULL + ); diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h new file mode 100644 index 0000000..5c362e4 --- /dev/null +++ b/board/esd/du440/du440.h @@ -0,0 +1,42 @@ +/* + * (C) Copyright 2008 + * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDR0_USB0 0x0320 /* USB Control Register */ + +#define CFG_GPIO0_EP_EEP (0x80000000 >> 23) /* GPIO0_23 */ +#define CFG_GPIO1_DCF77 (0x80000000 >> (42-32)) /* GPIO1_42 */ + +#define CFG_GPIO1_IORSTN (0x80000000 >> (55-32)) /* GPIO1_55 */ + +#define CFG_GPIO1_HWVER_MASK 0x000000f0 /* GPIO1_56-59 */ +#define CFG_GPIO1_HWVER_SHIFT 4 +#define CFG_GPIO1_LEDUSR1 0x00000008 /* GPIO1_60 */ +#define CFG_GPIO1_LEDUSR2 0x00000004 /* GPIO1_61 */ +#define CFG_GPIO1_LEDPOST 0x00000002 /* GPIO1_62 */ +#define CFG_GPIO1_LEDDU 0x00000001 /* GPIO1_63 */ + +#define CPLD_VERSION_MASK 0x0f +#define PWR_INT_FLAG 0x80 +#define PWR_RDY 0x10 + +#define CPLD_IRQ (32+30) + +#define PCI_VENDOR_ID_ESDGMBH 0x12fe +#define PCI_DEVICE_ID_DU440 0x0444 diff --git a/board/esd/du440/init.S b/board/esd/du440/init.S new file mode 100644 index 0000000..4390b50 --- /dev/null +++ b/board/esd/du440/init.S @@ -0,0 +1,81 @@ +/* + * (C) Copyright 2008 + * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + */ + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ + tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) + +#ifdef CFG_INIT_RAM_DCACHE + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) +#endif + + /* TLB-entry for PCI Memory */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) + + /* TLB-entry for PCI IO */ + tlbentry( CFG_PCI_IOBASE, SZ_64K, CFG_PCI_IOBASE, 1, AC_R|AC_W|SA_G|SA_I ) + + /* TLB-entries for EBC: CPLD, DUMEM, DUIO */ + tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_DUMEM_BASE, SZ_1M, CFG_DUMEM_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_DUIO_BASE, SZ_64K, CFG_DUIO_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + + /* TLB-entry for NAND */ + tlbentry( CFG_NAND0_ADDR, SZ_1K, CFG_NAND0_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_NAND1_ADDR, SZ_1K, CFG_NAND1_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + + /* TLB-entry for Internal Registers & OCM */ + tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I ) + + /* TLB-entry PCI registers */ + tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + + /* TLB-entry for peripherals */ + tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + + tlbtab_end diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds new file mode 100644 index 0000000..e140737 --- /dev/null +++ b/board/esd/du440/u-boot.lds @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +}