AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

cpu/arm926ejs/at91sam9/Makefile

@@ -25,11 +25,14 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS	= ether.o timer.o spi.o usb.o
+COBJS-y	+= ether.o
+COBJS-y	+= timer.o
+COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o
+COBJS-y	+= usb.o
 SOBJS	= lowlevel_init.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS    := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
 
 all:	$(obj).depend $(LIB)
 

cpu/arm926ejs/at91sam9/spi.c

@@ -26,7 +26,6 @@
 #include <asm/arch/at91_pio.h>
 #include <asm/arch/at91_spi.h>
 
-#ifdef CONFIG_HAS_DATAFLASH
 #include <dataflash.h>
 
 #define AT91_SPI_PCS0_DATAFLASH_CARD	0xE	/* Chip Select 0: NPCS0%1110 */
@@ -85,6 +84,7 @@ void AT91F_SpiInit(void)
 void AT91F_SpiEnable(int cs)
 {
 	unsigned long mode;
+
 	switch (cs) {
 	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
 		mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
@@ -116,12 +116,10 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
 {
 	unsigned int timeout;
 
-
 	pDesc->state = BUSY;
 
 	writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
 
-
 	/* Initialize the Transmit and Receive Pointer */
 	writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR);
 	writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR);
@@ -157,4 +155,3 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
 
 	return DATAFLASH_OK;
 }
-#endif