|
|
|
@ -54,7 +54,8 @@ |
|
|
|
|
CFG_CMD_JFFS2 | \
|
|
|
|
|
CFG_CMD_I2C | \
|
|
|
|
|
CFG_CMD_DATE | \
|
|
|
|
|
CFG_CMD_EEPROM) |
|
|
|
|
CFG_CMD_EEPROM | \
|
|
|
|
|
CFG_CMD_DTT) |
|
|
|
|
|
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
|
|
|
|
#include <cmd_confdefs.h> |
|
|
|
@ -75,7 +76,7 @@ |
|
|
|
|
#define CONFIG_MPC5xxx_FEC 1 |
|
|
|
|
#define CONFIG_PHY_ADDR 0x2 |
|
|
|
|
#define CONFIG_PHY_TYPE 0x79c874 |
|
|
|
|
|
|
|
|
|
#define CONFIG_RESET_PHY_R 1 |
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Autobooting |
|
|
|
@ -116,26 +117,27 @@ |
|
|
|
|
"fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
|
|
|
|
|
"ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
|
|
|
|
|
"multi_image_file=kernel+initrd+dtb.img\0" \
|
|
|
|
|
"load=tftp $(u-boot_addr) $(u-boot)\0" \
|
|
|
|
|
"load=tftp ${u-boot_addr} ${u-boot}\0" \
|
|
|
|
|
"update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \
|
|
|
|
|
"cp.b $(u-boot_addr) fff00000 $(filesize);" \
|
|
|
|
|
"cp.b ${u-boot_addr} fff00000 ${filesize};" \
|
|
|
|
|
"prot on fff00000 fff3ffff\0" \
|
|
|
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
|
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
|
|
|
"nfsroot=$(serverip):$(rootpath)\0" \
|
|
|
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
|
|
|
"fat_args=setenv bootargs rw\0" \
|
|
|
|
|
"addip=setenv bootargs $(bootargs) " \
|
|
|
|
|
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
|
|
|
|
|
"$(netmask):$(hostname):$(netdev):off panic=1 " \
|
|
|
|
|
"console=$(console)\0" \
|
|
|
|
|
"net_nfs=tftp $(kernel_addr) $(bootfile); " \
|
|
|
|
|
"tftp $(fdt_addr) $(fdt_file); run nfsargs addip; " \
|
|
|
|
|
"bootm $(kernel_addr) - $(fdt_addr)\0" \
|
|
|
|
|
"net_self=tftp $(kernel_addr) $(bootfile); " \
|
|
|
|
|
"tftp $(fdt_addr) $(fdt_file); " \
|
|
|
|
|
"tftp $(ramdisk_addr) $(ramdisk_file); " \
|
|
|
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
|
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
|
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
|
|
|
|
"${netmask}:${hostname}:${netdev}:off panic=1 " \
|
|
|
|
|
"console=${console}\0" \
|
|
|
|
|
"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
|
|
|
|
|
"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; " \
|
|
|
|
|
"bootm ${kernel_addr} - ${fdt_addr}\0" \
|
|
|
|
|
"net_self=tftp ${kernel_addr} ${bootfile}; " \
|
|
|
|
|
"tftp ${fdt_addr} ${fdt_file}; " \
|
|
|
|
|
"tftp ${ramdisk_addr} ${ramdisk_file}; " \
|
|
|
|
|
"run ramargs addip; " \
|
|
|
|
|
"bootm $(kernel_addr) $(ramdisk_addr) $(fdt_addr)\0" \
|
|
|
|
|
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
|
|
|
|
"fat_multi=run fat_args addip; fatload ide 0:1 " \
|
|
|
|
|
"${multi_image_addr} ${multi_image_file}; " \
|
|
|
|
|
"bootm ${multi_image_addr}\0" \
|
|
|
|
@ -160,9 +162,9 @@ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set IPB speed to 100MHz (yes, the #define is misnamed) |
|
|
|
|
* Set IPB speed to 100MHz |
|
|
|
|
*/ |
|
|
|
|
#define CFG_IPBSPEED_133 |
|
|
|
|
#define CFG_IPBCLK_EQUALS_XLBCLK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
@ -268,7 +270,8 @@ |
|
|
|
|
#define MTDIDS_DEFAULT "nor0=motionpro-0" |
|
|
|
|
#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ |
|
|
|
|
"13m(fs),2m(kernel),256k(uboot)," \
|
|
|
|
|
"64k(env),64k(dtb),-(user_data)" |
|
|
|
|
"64k(env),64k(redund_env),64k(dtb)," \
|
|
|
|
|
"-(user_data)" |
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* IDE/ATA configuration |
|
|
|
@ -297,8 +300,9 @@ |
|
|
|
|
* EEPROM configuration |
|
|
|
|
*/ |
|
|
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1 |
|
|
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 3 |
|
|
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 |
|
|
|
|
#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* DTT driver needs this */ |
|
|
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */ |
|
|
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */ |
|
|
|
|
#define CFG_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ |
|
|
|
|
|
|
|
|
|
|
|
|
|
@ -310,6 +314,35 @@ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Status LED configuration |
|
|
|
|
*/ |
|
|
|
|
#define CONFIG_STATUS_LED /* Status LED enabled */ |
|
|
|
|
#define CONFIG_BOARD_SPECIFIC_LED |
|
|
|
|
|
|
|
|
|
#define ENABLE_GPIO_OUT 0x00000024 |
|
|
|
|
#define LED_ON 0x00000010 |
|
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__ |
|
|
|
|
/*
|
|
|
|
|
* In case of Motion-PRO, a LED is identified by its corresponding |
|
|
|
|
* GPT Enable and Mode Select Register. |
|
|
|
|
*/ |
|
|
|
|
typedef volatile unsigned long * led_id_t; |
|
|
|
|
|
|
|
|
|
extern void __led_init(led_id_t id, int state); |
|
|
|
|
extern void __led_toggle(led_id_t id); |
|
|
|
|
extern void __led_set(led_id_t id, int state); |
|
|
|
|
#endif /* __ASSEMBLY__ */ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Temperature sensor |
|
|
|
|
*/ |
|
|
|
|
#define CONFIG_DTT_LM75 1 |
|
|
|
|
#define CONFIG_DTT_SENSORS { 0x49 } |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Environment settings |
|
|
|
|
*/ |
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1 |
|
|
|
@ -318,6 +351,9 @@ |
|
|
|
|
#define CFG_ENV_SIZE 0x1000 |
|
|
|
|
#define CFG_ENV_SECT_SIZE 0x10000 |
|
|
|
|
|
|
|
|
|
/* Configuration of redundant environment */ |
|
|
|
|
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) |
|
|
|
|
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) |
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Pin multiplexing configuration |
|
|
|
@ -335,11 +371,17 @@ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Motion-PRO's CPLD revision control register |
|
|
|
|
*/ |
|
|
|
|
#define CPLD_REV_REGISTER (CFG_CS2_START + 0x06) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Miscellaneous configurable options |
|
|
|
|
*/ |
|
|
|
|
#define CFG_LONGHELP /* undef to save memory */ |
|
|
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
|
|
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
|
|
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
|
|
|
|
#define CFG_MAXARGS 16 /* max number of command args */ |
|
|
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
|
|
|
@ -376,6 +418,6 @@ |
|
|
|
|
#define OF_CPU "PowerPC,5200@0" |
|
|
|
|
#define OF_SOC "soc5200@f0000000" |
|
|
|
|
#define OF_TBCLK (bd->bi_busfreq / 4) |
|
|
|
|
#define OF_STDOUT_PAT "/soc5200@f0000000/serial@2000" |
|
|
|
|
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" |
|
|
|
|
|
|
|
|
|
#endif /* __CONFIG_H */ |
|
|
|
|