arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA board

The Armadillo-800EVA board has Renesas R-Mobile R8A7740, 512MB DDR3-SDRAM,
Ethernet, and more.

This patch supports the following functions:
 - 512MB DDR3-SDRAM
 - Serial console (SCIF)
 - Ethernet MAC(MII) & PHY(SMSC)

Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
master
Hideyuki Sano 13 years ago committed by Albert ARIBAUD
parent 62d0b6bab1
commit 1a31ca4a78
  1. 4
      MAINTAINERS
  2. 13
      arch/arm/include/asm/mach-types.h
  3. 46
      board/atmark-techno/armadillo-800eva/Makefile
  4. 331
      board/atmark-techno/armadillo-800eva/armadillo-800eva.c
  5. 1
      boards.cfg
  6. 157
      include/configs/armadillo-800eva.h

@ -994,6 +994,10 @@ Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
kzm9g SH73A0 (RMOBILE SoC)
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
armadillo-800eva R8A7740 (RMOBILE SoC)
-------------------------------------------------------------------------
Unknown / orphaned boards:

@ -1105,6 +1105,7 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_UBISYS_P9D_EVP 3493
#define MACH_TYPE_ATDGP318 3494
#define MACH_TYPE_OMAP5_SEVM 3777
#define MACH_TYPE_ARMADILLO_800EVA 3863
#define MACH_TYPE_KZM9G 4140
#ifdef CONFIG_ARCH_EBSA110
@ -14223,6 +14224,18 @@ extern unsigned int __machine_arch_type;
# define machine_is_omap5_sevm() (0)
#endif
#ifdef CONFIG_MACH_ARMADILLO800EVA
# ifdef machine_arch_type
# undef machine_arch_type
# define machine_arch_type __machine_arch_type
# else
# define machine_arch_type MACH_TYPE_ARMADILLO800EVA
# endif
# define machine_is_armadillo800eva() (machine_arch_type == MACH_TYPE_ARMADILLO800EVA)
#else
# define machine_is_armadillo800eva() (0)
#endif
#ifdef CONFIG_MACH_KZM9G
# ifdef machine_arch_type
# undef machine_arch_type

@ -0,0 +1,46 @@
#
# Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS-y += armadillo-800eva.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

@ -0,0 +1,331 @@
/*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
#define s_init_wait(cnt) \
({ \
volatile u32 i = 0x10000 * cnt; \
while (i > 0) \
i--; \
})
#define USBCR1 0xE605810A
void s_init(void)
{
struct r8a7740_rwdt *rwdt0 = (struct r8a7740_rwdt *)RWDT0_BASE;
struct r8a7740_rwdt *rwdt1 = (struct r8a7740_rwdt *)RWDT1_BASE;
struct r8a7740_cpg *cpg = (struct r8a7740_cpg *)CPG_BASE;
struct r8a7740_bsc *bsc = (struct r8a7740_bsc *)BSC_BASE;
struct r8a7740_ddrp *ddrp = (struct r8a7740_ddrp *)DDRP_BASE;
struct r8a7740_dbsc *dbsc = (struct r8a7740_dbsc *)DBSC_BASE;
/* Watchdog init */
writew(0xA500, &rwdt0->rwtcsra0);
writew(0xA500, &rwdt1->rwtcsra0);
/* CPG */
writel(0xFF800080, &cpg->rmstpcr4);
writel(0xFF800080, &cpg->smstpcr4);
/* USB clock */
writel(0x00000080, &cpg->usbckcr);
s_init_wait(1);
/* USBCR1 */
writew(0x0710, USBCR1);
/* FRQCR */
writel(0x00000000, &cpg->frqcrb);
writel(0x62030533, &cpg->frqcra);
writel(0x208A354E, &cpg->frqcrc);
writel(0x80331050, &cpg->frqcrb);
s_init_wait(1);
writel(0x00000000, &cpg->frqcrd);
s_init_wait(1);
/* SUBClk */
writel(0x0000010B, &cpg->subckcr);
/* PLL */
writel(0x00004004, &cpg->pllc01cr);
s_init_wait(1);
writel(0xa0000000, &cpg->pllc2cr);
s_init_wait(2);
/* BSC */
writel(0x0000001B, &bsc->cmncr);
writel(0x20000000, &dbsc->dbcmd);
writel(0x10009C40, &dbsc->dbcmd);
s_init_wait(1);
writel(0x00000007, &dbsc->dbkind);
writel(0x0E030A02, &dbsc->dbconf0);
writel(0x00000001, &dbsc->dbphytype);
writel(0x00000000, &dbsc->dbbl);
writel(0x00000006, &dbsc->dbtr0);
writel(0x00000005, &dbsc->dbtr1);
writel(0x00000000, &dbsc->dbtr2);
writel(0x00000006, &dbsc->dbtr3);
writel(0x00080006, &dbsc->dbtr4);
writel(0x00000015, &dbsc->dbtr5);
writel(0x0000000f, &dbsc->dbtr6);
writel(0x00000004, &dbsc->dbtr7);
writel(0x00000018, &dbsc->dbtr8);
writel(0x00000006, &dbsc->dbtr9);
writel(0x00000006, &dbsc->dbtr10);
writel(0x0000000F, &dbsc->dbtr11);
writel(0x0000000D, &dbsc->dbtr12);
writel(0x000000A0, &dbsc->dbtr13);
writel(0x000A0003, &dbsc->dbtr14);
writel(0x00000003, &dbsc->dbtr15);
writel(0x40005005, &dbsc->dbtr16);
writel(0x0C0C0000, &dbsc->dbtr17);
writel(0x00000200, &dbsc->dbtr18);
writel(0x00000040, &dbsc->dbtr19);
writel(0x00000001, &dbsc->dbrnk0);
writel(0x00000110, &dbsc->dbdficnt);
writel(0x00000101, &ddrp->funcctrl);
writel(0x00000001, &ddrp->dllctrl);
writel(0x00000186, &ddrp->zqcalctrl);
writel(0xB3440051, &ddrp->zqodtctrl);
writel(0x94449443, &ddrp->rdctrl);
writel(0x000000C0, &ddrp->rdtmg);
writel(0x00000101, &ddrp->fifoinit);
writel(0x02060506, &ddrp->outctrl);
writel(0x00004646, &ddrp->dqcalofs1);
writel(0x00004646, &ddrp->dqcalofs2);
writel(0x800000aa, &ddrp->dqcalexp);
writel(0x00000000, &ddrp->dllctrl);
writel(0x00000000, DDRPNCNT);
writel(0x0000000C, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00000002, DDRPNCNT);
writel(0x0000000C, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00000187, &ddrp->zqcalctrl);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00000010, &dbsc->dbdficnt);
writel(0x02060507, &ddrp->outctrl);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x21009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x11000044, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x2A000000, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x2B000000, &dbsc->dbcmd);
readl(&dbsc->dbwait);
writel(0x29000004, &dbsc->dbcmd);
readl(&dbsc->dbwait);
writel(0x28001520, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x03000200, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x000001FF, &dbsc->dbrfcnf0);
writel(0x00010C30, &dbsc->dbrfcnf1);
writel(0x00000000, &dbsc->dbrfcnf2);
writel(0x00000001, &dbsc->dbrfen);
writel(0x00000001, &dbsc->dbacen);
/* BSC */
writel(0x00410400, &bsc->cs0bcr);
writel(0x00410400, &bsc->cs2bcr);
writel(0x00410400, &bsc->cs5bbcr);
writel(0x02CB0400, &bsc->cs6abcr);
writel(0x00000440, &bsc->cs0wcr);
writel(0x00000440, &bsc->cs2wcr);
writel(0x00000240, &bsc->cs5bwcr);
writel(0x00000240, &bsc->cs6awcr);
writel(0x00000005, &bsc->rbwtcnt);
writel(0x00000002, &bsc->cs0wcr2);
writel(0x00000002, &bsc->cs2wcr2);
writel(0x00000002, &bsc->cs4wcr2);
}
#define GPIO_ICCR (0xE60581A0)
#define ICCR_15BIT (1 << 15) /* any time 1 */
#define IIC0_CONTA (1 << 7)
#define IIC0_CONTB (1 << 6)
#define IIC1_CONTA (1 << 5)
#define IIC1_CONTB (1 << 4)
#define IIC0_PS33E (1 << 1)
#define IIC1_PS33E (1 << 0)
#define GPIO_ICCR_DATA \
(ICCR_15BIT | \
IIC0_CONTA | IIC0_CONTB | IIC1_CONTA | \
IIC1_CONTB | IIC0_PS33E | IIC1_PS33E)
#define MSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
#define I2C0_MSTP116 (1 << 16)
#define MSTPCR3 0xE615013C
#define I2C1_MSTP323 (1 << 23)
#define GETHER_MSTP309 (1 << 9)
int board_early_init_f(void)
{
/* TMU */
clrbits_le32(MSTPCR1, TMU0_MSTP125);
/* GETHER */
clrbits_le32(MSTPCR3, GETHER_MSTP309);
/* I2C 0/1 */
clrbits_le32(MSTPCR1, I2C0_MSTP116);
clrbits_le32(MSTPCR3, I2C1_MSTP323);
/* SCIFA1 */
r8a7740_pinmux_init();
gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
/* IICCR */
writew(GPIO_ICCR_DATA, GPIO_ICCR);
return 0;
}
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
/* board id for linux */
gd->bd->bi_arch_number = MACH_TYPE_ARMADILLO_800EVA;
/* adress of boot parameters */
gd->bd->bi_boot_params = ARMADILLO_800EVA_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7740_pinmux_init();
/* GETHER Enable */
gpio_request(GPIO_FN_ET_CRS, NULL);
gpio_request(GPIO_FN_ET_MDC, NULL);
gpio_request(GPIO_FN_ET_MDIO, NULL);
gpio_request(GPIO_FN_ET_TX_ER, NULL);
gpio_request(GPIO_FN_ET_RX_ER, NULL);
gpio_request(GPIO_FN_ET_ERXD0, NULL);
gpio_request(GPIO_FN_ET_ERXD1, NULL);
gpio_request(GPIO_FN_ET_ERXD2, NULL);
gpio_request(GPIO_FN_ET_ERXD3, NULL);
gpio_request(GPIO_FN_ET_TX_CLK, NULL);
gpio_request(GPIO_FN_ET_TX_EN, NULL);
gpio_request(GPIO_FN_ET_ETXD0, NULL);
gpio_request(GPIO_FN_ET_ETXD1, NULL);
gpio_request(GPIO_FN_ET_ETXD2, NULL);
gpio_request(GPIO_FN_ET_ETXD3, NULL);
gpio_request(GPIO_FN_ET_PHY_INT, NULL);
gpio_request(GPIO_FN_ET_COL, NULL);
gpio_request(GPIO_FN_ET_RX_DV, NULL);
gpio_request(GPIO_FN_ET_RX_CLK, NULL);
gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
gpio_direction_output(GPIO_PORT18, 1);
return 0;
}
int dram_init(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
int board_eth_init(bd_t *bis)
{
return sh_eth_initialize(bis);
}
const struct rmobile_sysinfo sysinfo = {
CONFIG_RMOBILE_BOARD_STRING
};
int board_late_init(void)
{
return 0;
}
void reset_cpu(ulong addr)
{
}

@ -273,6 +273,7 @@ whistler arm armv7:arm720t whistler nvidia
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
kzm9g arm armv7 kzm9g kmc rmobile
armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile
actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB
actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8

@ -0,0 +1,157 @@
/*
* Configuation settings for the bonito board
*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ARMADILLO_800EVA_H
#define __ARMADILLO_800EVA_H
#undef DEBUG
#define CONFIG_ARMV7
#define CONFIG_R8A7740
#define CONFIG_RMOBILE
#define CONFIG_RMOBILE_BOARD_STRING "Armadillo-800EVA Board\n"
#define CONFIG_SH_GPIO_PFC
#include <asm/arch/rmobile.h>
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_DFL
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_RUN
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define BOARD_LATE_INIT
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS ""
#define CONFIG_VERSION_VARIABLE
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_NO_L2CACHE
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_TMU_TIMER
#define CONFIG_SYS_DCACHE_OFF
/* STACK */
#define CONFIG_SYS_INIT_SP_ADDR 0xE8083000
#define STACK_AREA_SIZE 0xC000
#define LOW_LEVEL_MERAM_STACK \
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
#define ARMADILLO_800EVA_SDRAM_BASE 0x40000000
#define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024)
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE 512
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF1
#define SCIF0_BASE 0xe6c40000
#define SCIF1_BASE 0xe6c50000
#define SCIF2_BASE 0xe6c60000
#define SCIF4_BASE 0xe6c80000
#define CONFIG_SCIF_A
#undef CONFIG_SYS_CONSOLE_INFO_QUIET
#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_SYS_MEMTEST_START (ARMADILLO_800EVA_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
504 * 1024 * 1024)
#undef CONFIG_SYS_ALT_MEMTEST
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
64 * 1024 * 1024)
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
#define CONFIG_SYS_GBL_DATA_SIZE (256)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
#define CONFIG_SYS_TEXT_BASE 0xE80C0000
/* FLASH */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_BASE 0x00000000
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
/* ENV setting */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
/* SH Ether */
#define CONFIG_NET_MULTI
#define CONFIG_SH_ETHER
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x0
#define CONFIG_SH_ETHER_BASE_ADDR 0xe9a00000
#define CONFIG_SH_ETHER_SH7734_MII (0x01)
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
#define CONFIG_PHYLIB
#define CONFIG_PHY_SMSC
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 50000000
#define CONFIG_SYS_TMU_CLK_DIV 4
#define CONFIG_SYS_HZ 1000
#endif /* __ARMADILLO_800EVA_H */
Loading…
Cancel
Save